FURNITUREBOX ALGARVE BISTRO User manual

ALGARVE BISTRO
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/algarvebistro
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
45 MINUTE
BUILD TABLE
MAXIMUM
CAPACITY 35Kg
TWO
PERSON

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clear, at, soft surface to
avoid bumps or scratches. Lay
all your components and xings
out. Note: we recommend you
don’t fully tighten any of the
bolts until everything is fully
assembled.
First, assemble your 2x chairs.
Find Backrest [B].
STEP 2
Attach the chair seat [C] to
the backrest [B] using 2 x
washer + bolt [G].
STEP 3
Attach 1x chair arm [A] to the
seat [B + C] using 4x washer
+ bolt [G].

www.furniturebox.co.uk
STEP 4
Attach the other chair arm
[A] to the seat [B + C] using 4x
washer + bolt [G]. Once fully
assembled, fully tighten the
bolts with Allen key [I]. Repeat
steps 1 - 4 for the 2nd chair.
STEP 5
Next, assemble the bistro table.
Attach tabletop [E] to 2x table
legs [D] using 2x washer +
bolts[K] for each leg - 4 in total.
STEP 6
Attach the table linker [F]
between the table legs [D]
using 2x washer + bolts [H] on
each end - 4 in total. Once the
table is assembled, fully tighten
the bolts using Allen key [I].

Follow us on Instagram
@furniturebox_uk
STEP 7
Place the seat cushions [J] onto your chairs. Check stability of all
components. Your table and chairs are now ready to use!