Furuno TZTL15F Manual

www.furuno.com
Home icon, power switch operations
Home icon, power switch operations
Operational Overview
Tap
Displays the home screen.
Home icon
Home icon
Display icons
(max. 10 on home screen)
Home screenHome screenHome screen
Home screenHome screen
Long tap a display icon to edit, delete, resize, or
change its location.
Display icon long tapped
Edit Delete
Size
(large or
small)
Tap
How to select a display
How to select a display
- Tap a display icon on the home screen.
- Tap a display icon on the quick page.
“eGuide” provides
an abbreviated
operator’s guide.
MULTI FUNCTION DISPLAY
TZTL12F/TZTL15F
Operator’s Guide
Model
This guide provides the basic operating procedures for this equipment. For detailed information, see the
Operator’s Manual in the supplied CD-ROM. You can get the latest version of the manual by accessing
the quick response code at the back of this guide. Connection of sensors required.
iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and
product names are trademarks, registered trademarks or service marks of their respctive holders.
How to edit a display icon
Lists
Quick pageQuick pageQuick page
Quick pageQuick page
Tap
Swipe downward from top of display
Power switch
Power switch
- Turns on power
- Shows [Power & Brilliance]
window.
Power offPower offPower off
Power offPower off
Power off function
only: Powers off this
unit.
Power off linked
function: Powers off
all NavNetTZ touch2
units in network.
Brilliance, HueBrilliance, Hue
Brilliance:
Hue:
Brilliance
Day

2
Touchscreen operations
Touchscreen operationsTouchscreen operations
Tap
- Select an item on a menu.
- Select an object to show the
corresponding pop-up menu.
- Move the chart.
- Scroll the menu.
- Show slide menu, layer menu.
Zoom in Zoom out
Do the function assigned to
[Function Gesture] in the
[Settings] - [General] menu.
Drag, swipe
Pinch Two finger tap
Menu operation
Menu operation
- Zoom in, zoom out the
plotter and weather displays.
- Change the range on the
radar display.
Slider barSlider barSlider bar
Slider barSlider bar
Drag
Tap operation also
available.
Pop-up menu
Tap screen (applicable
point, object, etc.)
Tap the required function.
(”>” indicates additional options.)
Layer menu
Tap the required function.
Layer menuLayer menuLayer menu
Layer menuLayer menu
Slide-out menu
Tap the required function.
Slide
menu
Slide
menu
Slide
menu
Slide
menu
Slide
menu
Swipe leftward from the
right edge. Icon color and function state
Yellow: ON, White: OFF
Tap the [Home] icon.
Tap [Settings].
Drag menu to find required
item, then tap item.
Tap the required option.
Settings menu
Two finger drag
Change the viewpoint
position on the 3D
display.
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Swipe upward from
the bottom edge.

3
Plotter
Display range
Data area
Inactive route
(expanded)
Point
Track
COG vector (broken line)
COG vector (broken line)
Return own
ship to screen
center
Ret
Tap
Orientation Mode
Switch between
NU and HU.
Switch between 2D
and 3D. (Drag upward
with two fingers also.)
2D: 3D
3D: 3D
Swipe from the left edge of the screen rightward to show the data area at the left edge of the screen. Tap
“<” to hide the data area.
How to add a data box
How to add a data box
How to remove or change the contents of a data box
How to remove or change the contents of a data box
Tap the data to add.
Tap an unoccupied space.
Ex. “Cursor” data added to the data
box
Data Area (Data Box)
Data Area (Data Box)
Tap the data to remove or change.
Tap the data to remove or change.Tap the data to remove or change.
Data box settings
Remove: Tap [Remove].
Change: Tap the data to use.
Use flipswitch to set data format.
(ON: Analog, OFF: Digital)
Boat icon
Boat icon
Inactive route
(sleeping)
(Departure or
arrival point,
selectable on
[Layers] menu.)
DATA ROUTE RADAR
DATA ROUTE RADAR
DATA ROUTE RADAR
DATA ROUTE RADAR
DATA ROUTE RADAR
Heading line
(yellowish-green solid line)
Tide Information

4
Points
Points can be entered on the plotter display (radar and fish finder displays also) to mark impor-
tant locations such as a good fishing spot. Point attributes (position, symbol type, color, etc.) are
recorded to the points list.
Tap where to enter a point.
The point is entered
on the screen.
Tap a point or the location
to set as destination.
On-screen point Selected location
On-screen point
On-screen point
Points list
Points list
How to enter a point
Yellow line:
Shortest course from own
ship to the destination.
Red dashed line (thick):
Indicates course to go to the
destination.
Tap the point to set as the destination.
How to set a point as destination
Tap [List] on the
home screen.
Sort the list by name, icon, color, range.
Destination point
Lists
If a point was tapped.
NoticeNoticeNotice
NoticeNotice
Note: [Find on Chart] puts the
selected point at the screen center.

5
Routes
Routes
A
route is comprised of a series of waypoints leading to a destination. Routes are saved to the
routes list.
On-screen route
On-screen route
Routes list
Routes list
Tap the first point for
the route.
At the last point
Tap the next point for the route.
Repeat to enter all points for the route.
How to create a new route
How to follow a route
Tap a leg of the route.
0
0
Tlfth t
1
2
3
4
1
2
3
4
Home screen
Sort list by name, color, or total length.
Tap the route.
Enter a name for the route, then tap [ ].
(Top right corner)
Lists
1st point
(route start point)
1st point
(route start point)
Last point
Last point

6
Radar
How to switch between standby and TX
How to switch between standby and TX
Select
method
Manual
adjustment
Tap to switch between
automatic and manual.
method
Manual
Drag the
slider/tap the
slider bar to
adjust.
How to adjust the gain / sea clutter / rain clutter
How to adjust the gain / sea clutter / rain clutter
TX
X
Tap
: Standby
: TX
TX
TX
Tap
“A” means automatic adjustment
“M” means manual adjustment
Tap
Data
area
Own ship position
Own ship position
Heading line
Heading line
Guard zone
Guard zone
Fixed range rings Range
North mark
North mark
Slider
bar
Return own
ship icon to
own ship
position.
0
10
20
30
40
50
60
70
80
90
100
110
120
200
230
240
250 260 270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
Gain
Sea
Rain
Tap
(At bottom of data area)
RADAR
DATA ROUTE
RADAR
DATA ROUTE
AR
R
R
R
R
Tap
(Top right corner)
Radar Control
Radar Control
Radar Control
RADAR
D
ATA
2
D
ATA 1
74
Gain

7
Tap
Target
Target
Tap a target to show its range
and bearing from own ship.
How to measure the range, bearing from own ship to a target
How to measure the range, bearing from own ship to a target
How to set a guard zone
How to set a guard zone
A guard zone alerts you (with aural and visual alarms) when a radar target enters the area you
specify.
The guard zone appears in dashed
lines.
An icon appears at each corner
of the guard zone.
The dashed lines change to
solid lines, indicating the
guard zone is active.
Drag the icons to set guard zone.
0
10
20
30
40
50
60
70
80
90
100
110
120
200
230
240
250 260 270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
Open the
[Layers] menu.
1
Tap dashed line on guard zone.
Tap
Guard zone
Guard zone
Tap the guard zone again.
Tap
2:01 PM
ON
ON
ON
RADARDATA ROUTE
(Top right corner)
Goto
Radar Control

8
ARPA Operation
ARPA Operation
How to show, hide ARPA symbols
How to manually acquire a target
Tap the target to acquire.
Target
Target
Tap
ARPA symbols
At acquisition Lost target
How to display target data
ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision.
ARPA not only tracks other ships but also provides their navigation data. Targets can be acquired
manually, automatically, or both automatically and manually.
2
ID
BRG
RNG
CPA
TCPA
1
Within 30 seconds
after acquisition
1
ARPA symbols ON
ARPA symbols OFF
Acquire
Open the
[Layers] menu.
㞵㞷཯ᑕ
0
10
20
30
40
50
60
70
80
90
100
110
120
200
230
240
250 260 270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
2:01 PM
ARPA
ON
A
A
A
AR
A
OFF
RADARDATA ROUTE
Radar Control
Tap an ARPA target to show its data.
4
ARPA symbol
ARPA symbol
Tap

9
OR
CPA/TCPA alarm
The CPA/TCPA alarm releases an aural alarm and a visual alarm (message in Status bar) when
both the CPA and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting.
How to set the CPA/TCPA alarm
How to set the CPA/TCPA alarm
CPA: Closest point of approach
TCPA: Time to closest point of approach
How to acknowledge the CPA/TCPA alarm
How to acknowledge the CPA/TCPA alarm
CPA/TCPA Alarm
Tap the alarm message (top of screen) to acknowledge the alarm and stop the aural alarm.
Tap
Home screen
H
H
Set the alarm value, then tap [ ].
ON

10
AIS symbols ON
AIS symbols OFF
How to show or hide AIS target symbols
How to show or hide AIS target symbols
AIS target symbols
AIS target symbols
Class B AIS
Color: blue
SOG/COG
vector
Color: green
SOG/COG
vector
Color: red
Color
- AIS target: blue
- “x” symbol: red
Color
- AIS target: green
- “x” symbol: red
Class A AIS
Normal target
Dangerous target
Lost target
Proximity AIS target alarm
Proximity AIS target alarm
The proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an
AIS target is near the alarm value.
How to show AIS target data
How to show AIS target data
AIS (Automatic Identification System)
Home screen
H
H
F
URUN
O
98
7
65
4
321
Set the alarm value, then tap [ ].
20
30
60
Open the
[Layers] menu.
AISs
ON
OFF
ON
RADARDATA ROUTE
Tap an AIS target to show its data.
AIS symbol
AIS symbol FURUNO
Tap
FURUNO
FURUNO
987654321