GABBY WHITLEY SCH-166310 User manual

G A B B Y R
SCH-166310 WHITLEY NIGHTSTAND
ASSEMBLY INSTRUCTION
HOW TO ASSEMBLY:
STEP 1:
·Assemble the Body (A) Legs
(B) using the JCBC Bolt M6 x 30 mm (1) with
Flat Washer (2) and Spring Washer (3) Securely tighten with
Allen Key 4 (4) as provided shown detail 1;
Hardware Include :
No Part Description Qty
112 pcs
JCBC Bolts M6 X 30 mm
2Flat Washer 12 pcs
312 pcs
Spring Washer
1 pc
Allen Key 4
4
No Description Qty
A1 pc
Body
Parts Include :
4 pcs
BLegs
Detail 2
STEP 2:
·If the floor uneven the levelers located at the underside of the
Leg, to do this lift Up the side that need to be elevated to
provide access to the levelers, turn the leveler until adequate
contact with the floor as shown detail 2.
A
B
Detail 1
Page 1 of 2
21
3
4
Date 8-4-2020

G A B B Y R
SCH-166310 WHITLEY NIGHTSTAND
ASSEMBLY INSTRUCTION
Page 2 of 2
STEP 3 :
·The Fisher (E) (wall insert) should be used in conjunction with using a wall stud as anchor.
The combination will make the unit very stable. Attach one of the Brackets (C) horizontally to the top
of the back of the Desk using the Small Screws (A).Screw the remaining Bracket (C) vertically 1 inch
below the brackets attached to the Desk using the large screws (B). The Large Screws (B) should be
screwed into a stud in the wall. Align the Brackets vertically and string in the Retention Belt (D).
Confirm Strap is securely laced and locked as shown Detail 3.
Hardware Include :
Part Description Qty
Screw Ø8 x 2"
Bracket
Retention Belt
1 pcs
1 pcs
2 pcs
1 pc
A
No
B
C
D
Fisher S8 1 pcE
Screw Ø8 x 3/4"
Detail 3
Date 8-4-2020