GBC GBC CLA303H User manual

CLA303H
Pouch Laminator
Instruction Manual

Pouch Laminator CLA303H
Machine bottom
Pouch insertion slot
Warm-up indicator
Pouch guide
Carry
handle
Reverse button
Pouch exit outlet
Cable winding compartment
Power Cord
Temperature
setting buttons
AB
DE F
C
Power button

Electrical safeguards
Safety instructions
Special notice
Cleaning
Important safeguards
General safeguards
Service
Electrical
Machine Dimensions
Machine Weight
Warm-Up Time
Technical specifications
GBC Pouch Laminator CLA303H
Maximum Pouch Width
Maximum Pouch Thickness
Maximum Thru-put Thickness
220-240V / 50HZ / 650W / 3.0A
497 x 184 x 85 mm
3.0 kg
2 x 150 mic (Total 300)
0.8 mm
4-6 minutes
340 mm
t%POPUBUUFNQUUPTFSWJDFPSSFQBJSUIFQPVDIMBNJOBUPS
yourself. Unplug the unit and contact an authorised ACCO
Brands service representative for any required repairs.
Caution: Unplug this product before cleaning.
t8JQFFYUFSJPSPOMZXJUIBEBNQDMPUI%POPUVTF
detergents or solvents.
t%POPUVTFBFSPTPMEVTUFSTPSDMFBOFST
t%POPUTQSBZBOZUIJOHJOUPUIFNBDIJOF
Thank you, for your recent purchase of a GBC Pouch Laminator.
Your new laminator may emit a slight odour during the initial
stage of operation. It is normal and will diminish after several
hours of operation.
THE SAFETY ALERT SYMBOL PRECEDES EACH
SAFETY MESSAGE IN THIS INSTRUCTION MANUAL.
THIS SYMBOL INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD THAT COULD HURT YOU OR
OTHERS, AS WELL AS CAUSE PRODUCT DAMAGE
OR PROPERTY DAMAGE.
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS
*.1035"/550"$$0#3"/%4*/5)*4*/4536$5*0/
."/6"-"3&*.1035"/54"'&5:.&44"(&43&"%
THESE MESSAGES CAREFULLY.
WARNING: FOR YOUR PROTECTION DO NOT
CONNECT THE POUCH LAMINATOR TO
ELECTRICAL POWER UNTIL YOU READ THESE
INSTRUCTIONS COMPLETELY. KEEP THESE
INSTRUCTIONS IN A CONVENIENT LOCATION
FOR FUTURE REFERENCE. TO GUARD AGAINST
INJURY, THE FOLLOWING BASIC SAFETY
PRECAUTIONS MUST BE OBSERVED IN THE
SET-UP AND USE OF THIS PRODUCT.
t5IFVOJUNVTUCFDPOOFDUFEUPBTVQQMZWPMUBHF
corresponding to the electrical rating shown on the unit.
t6OQMVHUIFVOJUCFGPSFNPWJOHJUPSXIFOJUJTOPUJOVTF
for an extended period of time.
t%POPUPQFSBUFXJUIBEBNBHFETVQQMZDPSEPSQMVH%P
not alter the attachment plug. The plug is configured for
the appropriate electrical supply.
t%POPUPWFSMPBEFMFDUSJDBMPVUMFUTCFZPOEUIFJSDBQBDJUZmSF
or electrical shock could result.
t5IFVOJUJTJOUFOEFEGPSJOEPPSVTFPOMZ
t$MPTFTVQFSWJTJPOJTSFRVJSFEXIFOUIJTQSPEVDUJTVTFE
near children.
t6TFUIFVOJUPOMZGPSJUTJOUFOEFEQVSQPTFTPGMBNJOBUJOH
documents.
t%POPUQMBDFBOZUIJOHJOUIFUISPBUPQFOJOHPGUIF
laminator other than pouches/documents.
t1MBDFVOJUPOBTFDVSFTUBCMFXPSLBSFBUPQSFWFOUUIFVOJU
from falling and possibly causing personal injury and
damage to the unit.
t'PMMPXBMMXBSOJOHTBOEJOTUSVDUJPOTNBSLFEPOUIFVOJU
t5IFTPDLFUPVUMFUTIBMMCFJOTUBMMFEOFBSUIFFRVJQNFOU
and shall be easily accessible.
t%POPUBUUFNQUTJOHMFTJEFMBNJOBUJPOUIJTXJMMEFTUSPZUIF
laminator.
t%POPUCMPDLUIFWFOUTMPUTUIJTXJMMDBVTFUIFMBNJOBUPSUP
overheat.

Operation, hot lamination
1
2
3
4
5
6
7
8
Reverse Button
Operation, cold lamination
1
2
4
3
Laminating Tips
Connect power cord to appropriate power source.
Push the power button to turn the power “ON” (fig. A).
Select the button for the appropriate pouch gauge
thickness and material you are laminating. The indicator
glows (fig. B).
The laminator will pre-heat for approximately 4-6 minutes.
When the required temperature is reached the laminator
NBDIJOFXJMMCFFQUXJDFBOEUIF-&%JOEJDBUPSBUUIF
laminating entrance will turn from red to green (fig. C).
Centre the item to be laminated within the pouch left to
right with the top edge against the sealed edge of the
QPVDImH%
Insert the pouch with the sealed edge first into the
machine (fig. E).
The laminated item will automatically exit at front of the
machine. After the pouch has stopped moving,
immediately place it on a flat surface to cool for one
minute before handling (fig. F).
If you have finished laminating, push the power button to
turn off the machine (fig. A).
NOTE: DO NOT LAMINATE AN EMPTY POUCH.
Connect power cord to appropriate power source.
Push the power button to turn the power “ON” (fig. A).
Cold laminating is the default setting.
Once cold lamination is ready the machine will beep twice
BOEUIF-&%JOEJDBUPSBUUIFMBNJOBUJOHFOUSBODFwill turn
from red to green (fig. C).
Use and laminate your cold pouch.
CAUTION: If you have just done hot lamination,
turn the machine off and on again and wait for the
LED indicator at the entrance to turn green before
attempting to do cold lamination.
1
2
Press the auto reverse button. This will reverse the
rotation of the rollers allowing the pouch to exit the front
of the machine.
After removing the pouch press the auto reverse button to
resume laminating.
CAUTION: Be careful when removing the
laminated pouch from the machine. It may be hot.
In the event of a misfeed or a jam follow these instructions.
t%0/05-".*/"5&"/&.15:106$)
t/FWFSJOTFSUUIFMPPTFFOEPGUIFQPVDIJOUPUIFNBDIJOFmSTU
This could cause the machine to jam.
t#FGPSFMBNJOBUJOHJNQPSUBOUPSVOJRVFEPDVNFOUTBMXBZTSVO
a test pouch through the laminator using a similar type of
document.
t%POPUBUUFNQUUPEPTJOHMFTJEFEMBNJOBUJPO5IJTXJMMEFTUSPZ
the laminator.
t"TTPPOBTIPUMBNJOBUJPOJTDPNQMFUFESFNPWFUIFMBNJOBUJPO
from the front of the machine and place on a cool flat surface
for cooling to prevent the pouch from curling.
t%POPUCMPDLUIFWFOUTMPUTUIJTXJMMDBVTFUIFMBNJOBUPSUP
overheat.
t%POPUDVUQPVDIFTQSJPSUPMBNJOBUJPO

Certificate of Warranty
(For use in Singapore only)
Model :
Serial No. :
Validity : 1 year from date of purchase
IMPORTANT: Certificate of Warranty must be produced together with proof of
purchase (e.g. sales invoice, receipts, etc) when your equipment requires our
service. All services provided after warranty period will be chargeable.
Terms and conditions
ACCO Brands Asia hereby certify that all machines of whatever designs are free
from any defects in materials and in workmanship under normal use and service for
twelve (12) months from date of purchase. Should any defects occur within the
aforesaid period, ACCO Brands Asia shall at their absolute discretion, effect repairs
or replacement of any part of the said machine free of costs.
1. This warranty shall not be transferable, negotiable or assignable to any third
party.
2. This warranty shall be considered VOID under the following circumstances:
a. The serial number of the machine has been altered or removed.
b. The machine has been subjected to misuse, accident, and negligence.
c. The machine has not been installed, maintained or operated in
accordance with the instructions given in the instruction manual.
d. The machine has undergone repairs, adjustments or corrections made to
it by unauthorised person.
e. The machine has been dismantled by unauthorised person.
3. This warranty is applicable only in Singapore.
4. This warranty shall exclude all faults/defects caused by natural wear and tear.
5. This warranty shall exclude all other warranties & guarantees, expressed or
implied other than mentioned above.
6. No notices will be given on expiry of this warranty. ACCO Brands Asia reserves
the rights to amend or modify the terms and conditions of this warranty without
giving any prior notice.
CARRY-IN
WARRANTY
No. 191214
Ref: CLA303H/SG/V1/191214
ACCO BRANDS ASIA PTE LTD
5A Toh Guan Road East
#06-03 Singapore 608830
Tel: [phone]
Fax: [phone]
[email protected]