GE UR Series C70 User manual

834766A1.CDR
g
GE Industrial Systems
C70 Capacitor Bank Protection
and Control System
UR Series Instruction Manual
C70 Revision: 5.7x
Manual P/N: 1601-9015-U3 (GEK-113517B)
Copyright © 2010 GE Multilin
GE Multilin
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: [phone] Fax: [phone]
Internet: http://www.GEmultilin.com
Title Page
IISO9001:2000
G
E
M
U
L
T
I
L
I
N
R
E
G
I
S
T
E
R
E
D
GE Multilin's Quality Management
System is registered to
ISO9001:2000
QMI # 005094
UL # A3775
*1601-9015-U3*
LISTED
52TL
IND.CONT. EQ.
E83849

GE Multilin C70 Capacitor Bank Protection and Control System iii
TABLE OF CONTENTS
1. GETTING STARTED 1.1 IMPORTANT PROCEDURES
1.1.1 CAUTIONS AND WARNINGS...........................................................................1-1
1.1.2 INSPECTION CHECKLIST................................................................................1-1
1.2 UR OVERVIEW
1.2.1 INTRODUCTION TO THE UR...........................................................................1-2
1.2.2 HARDWARE ARCHITECTURE.........................................................................1-3
1.2.3 SOFTWARE ARCHITECTURE..........................................................................1-4
1.2.4 IMPORTANT CONCEPTS.................................................................................1-4
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.1 PC REQUIREMENTS........................................................................................1-5
1.3.2 INSTALLATION..................................................................................................1-5
1.3.3 CONFIGURING THE C70 FOR SOFTWARE ACCESS....................................1-6
1.3.4 USING THE QUICK CONNECT FEATURE.......................................................1-9
1.3.5 CONNECTING TO THE C70 RELAY ..............................................................1-15
1.4 UR HARDWARE
1.4.1 MOUNTING AND WIRING...............................................................................1-16
1.4.2 COMMUNICATIONS........................................................................................1-16
1.4.3 FACEPLATE DISPLAY....................................................................................1-16
1.5 USING THE RELAY
1.5.1 FACEPLATE KEYPAD.....................................................................................1-17
1.5.2 MENU NAVIGATION .......................................................................................1-17
1.5.3 MENU HIERARCHY ........................................................................................1-17
1.5.4 RELAY ACTIVATION.......................................................................................1-17
1.5.5 RELAY PASSWORDS.....................................................................................1-18
1.5.6 FLEXLOGIC™ CUSTOMIZATION...................................................................1-18
1.5.7 COMMISSIONING ........................................................................................... 1-19
2. PRODUCT DESCRIPTION 2.1 INTRODUCTION
2.1.1 OVERVIEW........................................................................................................2-1
2.1.2 ORDERING........................................................................................................2-3
2.1.3 REPLACEMENT MODULES .............................................................................2-6
2.2 SPECIFICATIONS
2.2.1 PROTECTION ELEMENTS ...............................................................................2-9
2.2.2 USER-PROGRAMMABLE ELEMENTS...........................................................2-12
2.2.3 MONITORING..................................................................................................2-13
2.2.4 METERING......................................................................................................2-13
2.2.5 INPUTS............................................................................................................2-14
2.2.6 POWER SUPPLY ............................................................................................2-14
2.2.7 OUTPUTS........................................................................................................2-15
2.2.8 COMMUNICATIONS........................................................................................2-16
2.2.9 INTER-RELAY COMMUNICATIONS...............................................................2-18
2.2.10 ENVIRONMENTAL..........................................................................................2-18
2.2.11 TYPE TESTS ...................................................................................................2-19
2.2.12 PRODUCTION TESTS ....................................................................................2-19
2.2.13 APPROVALS ...................................................................................................2-20
2.2.14 MAINTENANCE...............................................................................................2-20
3. HARDWARE 3.1 DESCRIPTION
3.1.1 PANEL CUTOUT ...............................................................................................3-1
3.1.2 MODULE WITHDRAWAL AND INSERTION.....................................................3-6
3.1.3 REAR TERMINAL LAYOUT...............................................................................3-8
3.2 WIRING
3.2.1 TYPICAL WIRING..............................................................................................3-9
3.2.2 DIELECTRIC STRENGTH...............................................................................3-10
3.2.3 CONTROL POWER.........................................................................................3-10
3.2.4 CT/VT MODULES............................................................................................3-11
3.2.5 PROCESS BUS MODULES ............................................................................3-13
3.2.6 CONTACT INPUTS AND OUTPUTS...............................................................3-13
Table of Contents

iv C70 Capacitor Bank Protection and Control System GE Multilin
TABLE OF CONTENTS
3.2.7 TRANSDUCER INPUTS/OUTPUTS.................................................................3-21
3.2.8 RS232 FACEPLATE PORT..............................................................................3-22
3.2.9 CPU COMMUNICATION PORTS.....................................................................3-22
3.2.10 IRIG-B...............................................................................................................3-26
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS
3.3.1 DESCRIPTION .................................................................................................3-27
3.3.2 FIBER: LED AND ELED TRANSMITTERS......................................................3-29
3.3.3 G.703 INTERFACE...........................................................................................3-30
3.3.4 RS422 INTERFACE .........................................................................................3-33
3.3.5 IEEE C37.94 INTERFACE................................................................................3-35
3.4 MANAGED ETHERNET SWITCH MODULES
3.4.1 OVERVIEW ......................................................................................................3-38
3.4.2 MANAGED ETHERNET SWITCH MODULE HARDWARE..............................3-38
3.4.3 MANAGED SWITCH LED INDICATORS .........................................................3-39
3.4.4 CONFIGURING THE MANAGED ETHERNET SWITCH MODULE.................3-39
3.4.5 UPLOADING C70 SWITCH MODULE FIRMWARE.........................................3-42
3.4.6 ETHERNET SWITCH SELF-TEST ERRORS...................................................3-44
4. HUMAN INTERFACES 4.1 ENERVISTA UR SETUP INTERFACE
4.1.1 INTRODUCTION ................................................................................................4-1
4.1.2 CREATING A SITE LIST....................................................................................4-1
4.1.3 ENERVISTA UR SETUP OVERVIEW................................................................4-1
4.1.4 ENERVISTA UR SETUP MAIN WINDOW..........................................................4-3
4.2 EXTENDED ENERVISTA UR SETUP FEATURES
4.2.1 SETTINGS TEMPLATES ...................................................................................4-4
4.2.2 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS................................4-8
4.2.3 SETTINGS FILE TRACEABILITY.....................................................................4-10
4.3 FACEPLATE INTERFACE
4.3.1 FACEPLATE.....................................................................................................4-13
4.3.2 LED INDICATORS............................................................................................4-14
4.3.3 CUSTOM LABELING OF LEDS .......................................................................4-17
4.3.4 DISPLAY...........................................................................................................4-22
4.3.5 KEYPAD ...........................................................................................................4-22
4.3.6 BREAKER CONTROL......................................................................................4-23
4.3.7 MENUS.............................................................................................................4-24
4.3.8 CHANGING SETTINGS ...................................................................................4-26
5. SETTINGS 5.1 OVERVIEW
5.1.1 SETTINGS MAIN MENU ....................................................................................5-1
5.1.2 INTRODUCTION TO ELEMENTS......................................................................5-4
5.1.3 INTRODUCTION TO AC SOURCES..................................................................5-5
5.2 PRODUCT SETUP
5.2.1 SECURITY..........................................................................................................5-8
5.2.2 DISPLAY PROPERTIES ..................................................................................5-12
5.2.3 CLEAR RELAY RECORDS..............................................................................5-14
5.2.4 COMMUNICATIONS ........................................................................................5-15
5.2.5 MODBUS USER MAP......................................................................................5-35
5.2.6 REAL TIME CLOCK .........................................................................................5-36
5.2.7 USER-PROGRAMMABLE FAULT REPORTS.................................................5-37
5.2.8 OSCILLOGRAPHY...........................................................................................5-38
5.2.9 DATA LOGGER................................................................................................5-40
5.2.10 USER-PROGRAMMABLE LEDS .....................................................................5-42
5.2.11 USER-PROGRAMMABLE SELF TESTS .........................................................5-45
5.2.12 CONTROL PUSHBUTTONS............................................................................5-46
5.2.13 USER-PROGRAMMABLE PUSHBUTTONS....................................................5-47
5.2.14 FLEX STATE PARAMETERS ..........................................................................5-52
5.2.15 USER-DEFINABLE DISPLAYS........................................................................5-53
5.2.16 DIRECT INPUTS/OUTPUTS............................................................................5-55
5.2.17 INSTALLATION ................................................................................................5-63

GE Multilin C70 Capacitor Bank Protection and Control System v
TABLE OF CONTENTS
5.3 REMOTE RESOURCES
5.3.1 REMOTE RESOURCES CONFIGURATION...................................................5-64
5.4 SYSTEM SETUP
5.4.1 AC INPUTS......................................................................................................5-65
5.4.2 POWER SYSTEM............................................................................................5-66
5.4.3 SIGNAL SOURCES.........................................................................................5-68
5.4.4 BREAKERS......................................................................................................5-70
5.4.5 DISCONNECT SWITCHES .............................................................................5-74
5.4.6 FLEXCURVES™..............................................................................................5-77
5.5 FLEXLOGIC™
5.5.1 INTRODUCTION TO FLEXLOGIC™...............................................................5-84
5.5.2 FLEXLOGIC™ RULES ....................................................................................5-94
5.5.3 FLEXLOGIC™ EVALUATION..........................................................................5-94
5.5.4 FLEXLOGIC™ EXAMPLE ...............................................................................5-95
5.5.5 FLEXLOGIC™ EQUATION EDITOR...............................................................5-99
5.5.6 FLEXLOGIC™ TIMERS...................................................................................5-99
5.5.7 FLEXELEMENTS™.......................................................................................5-100
5.5.8 NON-VOLATILE LATCHES ...........................................................................5-104
5.6 GROUPED ELEMENTS
5.6.1 OVERVIEW....................................................................................................5-105
5.6.2 SETTING GROUP .........................................................................................5-105
5.6.3 BREAKER FAILURE......................................................................................5-106
5.6.4 PHASE CURRENT ........................................................................................5-115
5.6.5 NEUTRAL CURRENT....................................................................................5-128
5.6.6 GROUND CURRENT.....................................................................................5-140
5.6.7 VOLTAGE ELEMENTS..................................................................................5-143
5.7 CONTROL ELEMENTS
5.7.1 OVERVIEW....................................................................................................5-162
5.7.2 TRIP BUS.......................................................................................................5-162
5.7.3 SETTING GROUPS.......................................................................................5-164
5.7.4 SELECTOR SWITCH.....................................................................................5-165
5.7.5 TIME OF DAY TIMERS..................................................................................5-171
5.7.6 CAPACITOR CONTROL................................................................................5-172
5.7.7 AUTOMATIC VOLTAGE REGULATOR.........................................................5-177
5.7.8 DIGITAL ELEMENTS.....................................................................................5-182
5.7.9 DIGITAL COUNTERS....................................................................................5-185
5.7.10 MONITORING ELEMENTS ...........................................................................5-187
5.8 INPUTS/OUTPUTS
5.8.1 CONTACT INPUTS........................................................................................5-196
5.8.2 VIRTUAL INPUTS..........................................................................................5-198
5.8.3 CONTACT OUTPUTS....................................................................................5-199
5.8.4 VIRTUAL OUTPUTS......................................................................................5-201
5.8.5 REMOTE DEVICES.......................................................................................5-202
5.8.6 REMOTE INPUTS..........................................................................................5-203
5.8.7 REMOTE DOUBLE-POINT STATUS INPUTS ..............................................5-204
5.8.8 REMOTE OUTPUTS......................................................................................5-204
5.8.9 RESETTING...................................................................................................5-205
5.8.10 DIRECT INPUTS AND OUTPUTS.................................................................5-206
5.8.11 IEC 61850 GOOSE ANALOGS......................................................................5-209
5.8.12 IEC 61850 GOOSE INTEGERS.....................................................................5-210
5.9 TRANSDUCER INPUTS AND OUTPUTS
5.9.1 DCMA INPUTS ..............................................................................................5-211
5.9.2 RTD INPUTS..................................................................................................5-212
5.9.3 DCMA OUTPUTS ..........................................................................................5-214
5.10 TESTING
5.10.1 TEST MODE ..................................................................................................5-217
5.10.2 FORCE CONTACT INPUTS..........................................................................5-218
5.10.3 FORCE CONTACT OUTPUTS......................................................................5-219
6. ACTUAL VALUES 6.1 OVERVIEW
6.1.1 ACTUAL VALUES MAIN MENU ........................................................................6-1

vi C70 Capacitor Bank Protection and Control System GE Multilin
TABLE OF CONTENTS
6.2 STATUS
6.2.1 CONTACT INPUTS ............................................................................................6-3
6.2.2 VIRTUAL INPUTS ..............................................................................................6-3
6.2.3 REMOTE INPUTS ..............................................................................................6-3
6.2.4 REMOTE DOUBLE-POINT STATUS INPUTS...................................................6-4
6.2.5 CONTACT OUTPUTS........................................................................................6-4
6.2.6 VIRTUAL OUTPUTS ..........................................................................................6-4
6.2.7 REMOTE DEVICES............................................................................................6-5
6.2.8 DIGITAL COUNTERS.........................................................................................6-5
6.2.9 SELECTOR SWITCHES ....................................................................................6-6
6.2.10 TIME OF DAY TIMERS ......................................................................................6-6
6.2.11 FLEX STATES....................................................................................................6-6
6.2.12 ETHERNET ........................................................................................................6-6
6.2.13 DIRECT INPUTS ................................................................................................6-7
6.2.14 DIRECT DEVICES STATUS ..............................................................................6-7
6.2.15 IEC 61850 GOOSE INTEGERS .........................................................................6-8
6.2.16 ETHERNET SWITCH .........................................................................................6-8
6.3 METERING
6.3.1 METERING CONVENTIONS .............................................................................6-9
6.3.2 SOURCES........................................................................................................6-12
6.3.3 CAPACITOR CONTROL ..................................................................................6-16
6.3.4 CAPACITOR BANK..........................................................................................6-17
6.3.5 TRACKING FREQUENCY................................................................................6-18
6.3.6 FLEXELEMENTS™..........................................................................................6-18
6.3.7 IEC 61580 GOOSE ANALOG VALUES ...........................................................6-19
6.3.8 TRANSDUCER INPUTS/OUTPUTS.................................................................6-19
6.4 RECORDS
6.4.1 USER-PROGRAMMABLE FAULT REPORTS.................................................6-20
6.4.2 EVENT RECORDS...........................................................................................6-20
6.4.3 OSCILLOGRAPHY...........................................................................................6-20
6.4.4 DATA LOGGER................................................................................................6-21
6.5 PRODUCT INFORMATION
6.5.1 MODEL INFORMATION...................................................................................6-22
6.5.2 FIRMWARE REVISIONS..................................................................................6-22
7. COMMANDS AND
TARGETS 7.1 COMMANDS
7.1.1 COMMANDS MENU...........................................................................................7-1
7.1.2 CAPACITOR BANK AUTOMATIC SETTINGS...................................................7-1
7.1.3 VIRTUAL INPUTS ..............................................................................................7-6
7.1.4 CLEAR RECORDS.............................................................................................7-6
7.1.5 SET DATE AND TIME........................................................................................7-6
7.1.6 RELAY MAINTENANCE.....................................................................................7-7
7.2 TARGETS
7.2.1 TARGETS MENU ...............................................................................................7-8
7.2.2 TARGET MESSAGES........................................................................................7-8
7.2.3 RELAY SELF-TESTS .........................................................................................7-8
8. SECURITY 8.1 PASSWORD SECURITY
8.1.1 OVERVIEW ........................................................................................................8-1
8.1.2 PASSWORD SECURITY MENU........................................................................8-2
8.1.3 LOCAL PASSWORDS........................................................................................8-2
8.1.4 REMOTE PASSWORDS....................................................................................8-3
8.1.5 ACCESS SUPERVISION ...................................................................................8-3
8.1.6 DUAL PERMISSION SECURITY ACCESS........................................................8-4
8.2 SETTINGS SECURITY
8.2.1 SETTINGS TEMPLATES ...................................................................................8-6
8.2.2 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS..............................8-10
8.2.3 SETTINGS FILE TRACEABILITY.....................................................................8-12

GE Multilin C70 Capacitor Bank Protection and Control System vii
TABLE OF CONTENTS
8.3 ENERVISTA SECURITY MANAGEMENT SYSTEM
8.3.1 OVERVIEW......................................................................................................8-15
8.3.2 ENABLING THE SECURITY MANAGEMENT SYSTEM.................................8-15
8.3.3 ADDING A NEW USER ...................................................................................8-15
8.3.4 MODIFYING USER PRIVILEGES ...................................................................8-16
9. THEORY OF OPERATION 9.1 OVERVIEW
9.1.1 GENERAL OPERATION....................................................................................9-1
9.1.2 BANK PHASE OVERVOLTAGE (ANSI 59B).....................................................9-1
9.1.3 VOLTAGE DIFFERENTIAL (ANSI 87V) ............................................................9-3
9.1.4 COMPENSATED BANK NEUTRAL VOLTAGE UNBALANCE (ANSI 59NU).... 9-6
9.1.5 PHASE CURRENT UNBALANCE (ANSI 60P) ................................................9-10
9.1.6 NEUTRAL CURRENT UNBALANCE (ANSI 60N) ...........................................9-12
10. APPLICATION OF
SETTINGS 10.1 ARRANGEMENT OF SHUNT CAPACITOR BANKS
10.1.1 OVERVIEW......................................................................................................10-1
10.1.2 EXTERNALLY FUSED CAPACITORS ............................................................10-1
10.1.3 INTERNALLY FUSED CAPACITORS .............................................................10-1
10.1.4 FUSELESS CAPACITORS..............................................................................10-2
10.1.5 UNFUSED CAPACITORS ...............................................................................10-2
10.2 CONNECTIONS OF SHUNT CAPACITOR BANKS
10.2.1 GROUNDED WYE-CONNECTED BANKS......................................................10-3
10.2.2 UNGROUNDED WYE-CONNECTED BANKS.................................................10-3
10.2.3 DELTA-CONNECTED BANKS ........................................................................10-3
10.2.4 H-CONFIGURATION.......................................................................................10-3
10.2.5 TAPPED CONFIGURATION............................................................................10-3
10.2.6 SUMMARY.......................................................................................................10-4
10.3 PROTECTION METHODS FOR CAPACITOR BANKS
10.3.1 DESCRIPTION.................................................................................................10-5
10.3.2 CAPACITOR UNBALANCE PROTECTION.....................................................10-5
10.3.3 PROTECTION FOR RACK FAULTS (ARC-OVER WITHIN CAPACITOR BANK) .
10-1010.3.4 OVERVOLTAGE............................................................................................10-10
10.3.5 OVERCURRENT ...........................................................................................10-11
10.3.6 LOSS OF BUS VOLTAGE.............................................................................10-11
10.4 SETTING EXAMPLE
10.4.1 DESCRIPTION...............................................................................................10-12
10.4.2 VT AND CT SETUP .......................................................................................10-12
10.4.3 SOURCE ASSIGNMENT...............................................................................10-13
10.4.4 BANK UNBALANCE CALCULATIONS..........................................................10-14
10.4.5 BANK VOLTAGE DIFFERENTIAL SETTINGS..............................................10-16
10.4.6 BANK PHASE CURRENT UNBALANCE SETTINGS....................................10-18
10.4.7 BANK PHASE OVERVOLTAGE SETTINGS.................................................10-19
10.4.8 BANK PHASE UNDERVOLTAGE SETTINGS ..............................................10-20
10.4.9 BANK OVERCURRENT PROTECTION........................................................10-21
A. FLEXANALOG AND
FLEXINTEGER
PARAMETERS
A.1 PARAMETER LISTS
A.1.1 FLEXANALOG ITEMS.......................................................................................A-1
A.1.2 FLEXINTEGER ITEMS....................................................................................A-32
B. MODBUS
COMMUNICATIONS B.1 MODBUS RTU PROTOCOL
B.1.1 INTRODUCTION................................................................................................B-1
B.1.2 PHYSICAL LAYER.............................................................................................B-1
B.1.3 DATA LINK LAYER............................................................................................B-1

viii C70 Capacitor Bank Protection and Control System GE Multilin
TABLE OF CONTENTS
B.1.4 CRC-16 ALGORITHM .......................................................................................B-2
B.2 MODBUS FUNCTION CODES
B.2.1 SUPPORTED FUNCTION CODES...................................................................B-3
B.2.2 READ ACTUAL VALUES OR SETTINGS (FUNCTION CODE 03/04H)...........B-3
B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)...........................................B-4
B.2.4 STORE SINGLE SETTING (FUNCTION CODE 06H).......................................B-4
B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H)................................B-5
B.2.6 EXCEPTION RESPONSES...............................................................................B-5
B.3 FILE TRANSFERS
B.3.1 OBTAINING RELAY FILES VIA MODBUS........................................................B-6
B.3.2 MODBUS PASSWORD OPERATION...............................................................B-7
B.4 MEMORY MAPPING
B.4.1 MODBUS MEMORY MAP.................................................................................B-8
B.4.2 DATA FORMATS.............................................................................................B-61
C. IEC 61850
COMMUNICATIONS C.1 OVERVIEW
C.1.1 INTRODUCTION ...............................................................................................C-1
C.1.2 COMMUNICATION PROFILES.........................................................................C-1
C.2 SERVER DATA ORGANIZATION
C.2.1 OVERVIEW .......................................................................................................C-2
C.2.2 GGIO1: DIGITAL STATUS VALUES.................................................................C-2
C.2.3 GGIO2: DIGITAL CONTROL VALUES..............................................................C-2
C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM RECEIVED GOOSE
DATAC-2
C.2.5 GGIO4: GENERIC ANALOG MEASURED VALUES.........................................C-2
C.2.6 MMXU: ANALOG MEASURED VALUES..........................................................C-3
C.2.7 PROTECTION AND OTHER LOGICAL NODES...............................................C-3
C.3 SERVER FEATURES AND CONFIGURATION
C.3.1 BUFFERED/UNBUFFERED REPORTING........................................................C-5
C.3.2 FILE TRANSFER...............................................................................................C-5
C.3.3 TIMESTAMPS AND SCANNING.......................................................................C-5
C.3.4 LOGICAL DEVICE NAME .................................................................................C-5
C.3.5 LOCATION ........................................................................................................C-5
C.3.6 LOGICAL NODE NAME PREFIXES..................................................................C-6
C.3.7 CONNECTION TIMING.....................................................................................C-6
C.3.8 NON-IEC 61850 DATA......................................................................................C-6
C.3.9 COMMUNICATION SOFTWARE UTILITIES.....................................................C-6
C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE
C.4.1 OVERVIEW .......................................................................................................C-7
C.4.2 GSSE CONFIGURATION..................................................................................C-7
C.4.3 FIXED GOOSE..................................................................................................C-7
C.4.4 CONFIGURABLE GOOSE................................................................................C-7
C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE ..........................................C-9
C.4.6 GSSE ID AND GOOSE ID SETTINGS............................................................C-10
C.5 IEC 61850 IMPLEMENTATION VIA ENERVISTA UR SETUP
C.5.1 OVERVIEW .....................................................................................................C-11
C.5.2 CONFIGURING IEC 61850 SETTINGS ..........................................................C-12
C.5.3 ABOUT ICD FILES..........................................................................................C-13
C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP..............................C-17
C.5.5 ABOUT SCD FILES.........................................................................................C-17
C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP...........................C-20
C.6 ACSI CONFORMANCE
C.6.1 ACSI BASIC CONFORMANCE STATEMENT ................................................C-22
C.6.2 ACSI MODELS CONFORMANCE STATEMENT............................................C-22
C.6.3 ACSI SERVICES CONFORMANCE STATEMENT.........................................C-23
C.7 LOGICAL NODES
C.7.1 LOGICAL NODES TABLE...............................................................................C-26

GE Multilin C70 Capacitor Bank Protection and Control System ix
TABLE OF CONTENTS
D. IEC 60870-5-104
COMMUNICATIONS D.1 OVERVIEW
D.1.1 INTEROPERABILITY DOCUMENT...................................................................D-1
D.1.2 POINT LIST........................................................................................................D-9
E. DNP COMMUNICATIONS E.1 DEVICE PROFILE DOCUMENT
E.1.1 DNP V3.00 DEVICE PROFILE ..........................................................................E-1
E.1.2 IMPLEMENTATION TABLE...............................................................................E-4
E.2 DNP POINT LISTS
E.2.1 BINARY INPUT POINTS....................................................................................E-8
E.2.2 BINARY AND CONTROL RELAY OUTPUT......................................................E-9
E.2.3 COUNTERS.....................................................................................................E-10
E.2.4 ANALOG INPUTS............................................................................................E-11
F. MISCELLANEOUS F.1 CHANGE NOTES
F.1.1 REVISION HISTORY.........................................................................................F-1
F.1.2 CHANGES TO THE C70 MANUAL....................................................................F-1
F.2 ABBREVIATIONS
F.2.1 STANDARD ABBREVIATIONS .........................................................................F-6
F.3 WARRANTY
F.3.1 GE MULTILIN WARRANTY...............................................................................F-8

x C70 Capacitor Bank Protection and Control System GE Multilin
TABLE OF CONTENTS