GE N60 UR Series User manual

847710A1.CDR
g
GE Industrial Systems
N60 Revision: 5.5x
Manual P/N: 1601-0125-S3 (GEK-113419B)
Copyright © 2008 GE Multilin
N60 Network Stability and
Synchrophasor Measurement System
UR Series Instruction Manual
GE Multilin
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: [phone] Fax: [phone]
Internet: http://www.GEmultilin.com
Title Page
I
ISO9001:2000
G
E
M
U
L
T
I
L
I
N
R
E
G
I
S
T
E
R
E
D
GE Multilin's Quality Management
System is registered to
ISO9001:2000
QMI # 005094
UL # A3775
*1601-0125-S3*
LISTED
52TL
IND.CONT. EQ.
E83849

g
GE Industrial Systems
ADDENDUM
This addendum contains information that relates to the N60 Network Stability and Synchrophasor Measurement Sys-
tem, version 5.5x. This addendum lists a number of information items that appear in the instruction manual GEK-
113419B (revision S3) but are not included in the current N60 operations.
The following functions and items are not yet available with the current version of the N60 relay:
•N/A.
Version 4.0x and higher releases of the N60 relay includes new hardware (CPU and CT/VT modules).
• The new CPU modules are specified with the following order codes: 9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S.
• The new CT/VT modules are specified with the following order codes: 8F, 8G, 8H, 8J 8L, 8M, 8N, 8R.
The following table maps the relationship between the old CPU and CT/VT modules to the newer versions:
The new CT/VT modules can only be used with the new CPUs (9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S), and
the old CT/VT modules can only be used with the old CPU modules (9A, 9C, 9D). To prevent any hardware mis-
matches, the new CPU and CT/VT modules have blue labels and a warning sticker stating “Attn.: Ensure CPU and
DSP module label colors are the same!”. In the event that there is a mismatch between the CPU and CT/VT module,
the relay will not function and a DSP ERROR or HARDWARE MISMATCH error will be displayed.
All other input/output modules are compatible with the new hardware.
With respect to the firmware, firmware versions 4.0x and higher are only compatible with the new CPU and CT/VT mod-
ules. Previous versions of the firmware (3.4x and earlier) are only compatible with the older CPU and CT/VT modules.
MODULE OLD NEW DESCRIPTION
CPU 9A 9E RS485 and RS485 (Modbus RTU, DNP)
9C 9G RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP)
9D 9H RS485 and redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP)
--- 9J RS485 and multi-mode ST 100Base-FX
--- 9K RS485 and multi-mode ST redundant 100Base-FX
--- 9L RS485 and single mode SC 100Base-FX
--- 9M RS485 and single mode SC redundant 100Base-FX
--- 9N RS485 and 10/100Base-T
--- 9P RS485 and single mode ST 100Base-FX
--- 9R RS485 and single mode ST redundant 100Base-FX
--- 9S RS485 and six-port managed Ethernet switch
CT/VT 8A 8F Standard 4CT/4VT
8B 8G Sensitive ground 4CT/4VT
8C 8H Standard 8CT
8D 8J Sensitive ground 8CT/8VT
-- 8L Standard 4CT/4VT with enhanced diagnostics
-- 8M Sensitive ground 4CT/4VT with enhanced diagnostics
-- 8N Standard 8CT with enhanced diagnostics
-- 8R Sensitive ground 8CT/8VT with enhanced diagnostics
Addendum

GE Multilin N60 Network Stability and Synchrophasor Measurement System v
TABLE OF CONTENTS
1. GETTING STARTED 1.1 IMPORTANT PROCEDURES
1.1.1 CAUTIONS AND WARNINGS...........................................................................1-1
1.1.2 INSPECTION CHECKLIST................................................................................1-1
1.2 UR OVERVIEW
1.2.1 INTRODUCTION TO THE UR...........................................................................1-2
1.2.2 HARDWARE ARCHITECTURE.........................................................................1-3
1.2.3 SOFTWARE ARCHITECTURE..........................................................................1-4
1.2.4 IMPORTANT CONCEPTS.................................................................................1-4
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.1 PC REQUIREMENTS........................................................................................1-5
1.3.2 INSTALLATION..................................................................................................1-5
1.3.3 CONFIGURING THE N60 FOR SOFTWARE ACCESS....................................1-6
1.3.4 USING THE QUICK CONNECT FEATURE.......................................................1-9
1.3.5 CONNECTING TO THE N60 RELAY ..............................................................1-15
1.4 UR HARDWARE
1.4.1 MOUNTING AND WIRING...............................................................................1-16
1.4.2 COMMUNICATIONS........................................................................................1-16
1.4.3 FACEPLATE DISPLAY....................................................................................1-16
1.5 USING THE RELAY
1.5.1 FACEPLATE KEYPAD.....................................................................................1-17
1.5.2 MENU NAVIGATION .......................................................................................1-17
1.5.3 MENU HIERARCHY ........................................................................................1-17
1.5.4 RELAY ACTIVATION.......................................................................................1-17
1.5.5 RELAY PASSWORDS.....................................................................................1-18
1.5.6 FLEXLOGIC™ CUSTOMIZATION...................................................................1-18
1.5.7 COMMISSIONING ...........................................................................................1-19
2. PRODUCT DESCRIPTION 2.1 INTRODUCTION
2.1.1 OVERVIEW........................................................................................................2-1
2.1.2 ORDERING........................................................................................................2-3
2.1.3 REPLACEMENT MODULES .............................................................................2-3
2.2 SPECIFICATIONS
2.2.1 PROTECTION ELEMENTS ...............................................................................2-5
2.2.2 USER-PROGRAMMABLE ELEMENTS.............................................................2-6
2.2.3 MONITORING....................................................................................................2-7
2.2.4 METERING........................................................................................................2-8
2.2.5 INPUTS..............................................................................................................2-8
2.2.6 POWER SUPPLY ..............................................................................................2-9
2.2.7 OUTPUTS..........................................................................................................2-9
2.2.8 COMMUNICATIONS........................................................................................2-11
2.2.9 INTER-RELAY COMMUNICATIONS...............................................................2-12
2.2.10 ENVIRONMENTAL..........................................................................................2-12
2.2.11 TYPE TESTS ...................................................................................................2-13
2.2.12 PRODUCTION TESTS ....................................................................................2-13
2.2.13 APPROVALS ...................................................................................................2-13
2.2.14 MAINTENANCE...............................................................................................2-13
3. HARDWARE 3.1 DESCRIPTION
3.1.1 PANEL CUTOUT ...............................................................................................3-1
3.1.2 MODULE WITHDRAWAL AND INSERTION.....................................................3-3
3.1.3 REAR TERMINAL LAYOUT...............................................................................3-4
3.2 WIRING
3.2.1 TYPICAL WIRING..............................................................................................3-6
3.2.2 DIELECTRIC STRENGTH.................................................................................3-7
3.2.3 CONTROL POWER...........................................................................................3-7
3.2.4 CT AND VT MODULES .....................................................................................3-8
3.2.5 CONTACT INPUTS AND OUTPUTS...............................................................3-10
3.2.6 TRANSDUCER INPUTS AND OUTPUTS.......................................................3-18
Table of Contents

vi N60 Network Stability and Synchrophasor Measurement System GE Multilin
TABLE OF CONTENTS
3.2.7 RS232 FACEPLATE PORT..............................................................................3-19
3.2.8 CPU COMMUNICATION PORTS.....................................................................3-19
3.2.9 IRIG-B...............................................................................................................3-23
3.3 DIRECT INPUT AND OUTPUT COMMUNICATIONS
3.3.1 DESCRIPTION .................................................................................................3-24
3.3.2 FIBER: LED AND ELED TRANSMITTERS ......................................................3-26
3.3.3 FIBER-LASER TRANSMITTERS .....................................................................3-26
3.3.4 G.703 INTERFACE...........................................................................................3-27
3.3.5 RS422 INTERFACE .........................................................................................3-30
3.3.6 TWO-CHANNEL TWO-CLOCK RS422 INTERFACE.......................................3-32
3.3.7 RS422 AND FIBER INTERFACE .....................................................................3-32
3.3.8 IEEE C37.94 INTERFACE................................................................................3-33
3.4 MANAGED ETHERNET SWITCH MODULES
3.4.1 OVERVIEW ......................................................................................................3-35
3.4.2 MANAGED ETHERNET SWITCH MODULE HARDWARE..............................3-35
3.4.3 MANAGED SWITCH LED INDICATORS .........................................................3-36
3.4.4 CONFIGURING THE MANAGED ETHERNET SWITCH MODULE.................3-36
3.4.5 UPLOADING N60 SWITCH MODULE FIRMWARE.........................................3-38
3.4.6 ETHERNET SWITCH SELF-TEST ERRORS...................................................3-41
4. HUMAN INTERFACES 4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
4.1.1 INTRODUCTION ................................................................................................4-1
4.1.2 CREATING A SITE LIST....................................................................................4-1
4.1.3 ENERVISTA UR SETUP OVERVIEW................................................................4-1
4.1.4 ENERVISTA UR SETUP MAIN WINDOW..........................................................4-3
4.2 EXTENDED ENERVISTA UR SETUP FEATURES
4.2.1 SETTINGS TEMPLATES ...................................................................................4-4
4.2.2 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS................................4-8
4.2.3 SETTINGS FILE TRACEABILITY.....................................................................4-10
4.3 FACEPLATE INTERFACE
4.3.1 FACEPLATE.....................................................................................................4-13
4.3.2 LED INDICATORS............................................................................................4-14
4.3.3 CUSTOM LABELING OF LEDS .......................................................................4-16
4.3.4 DISPLAY...........................................................................................................4-22
4.3.5 KEYPAD...........................................................................................................4-22
4.3.6 BREAKER CONTROL......................................................................................4-22
4.3.7 MENUS.............................................................................................................4-23
4.3.8 CHANGING SETTINGS ...................................................................................4-25
5. SETTINGS 5.1 OVERVIEW
5.1.1 SETTINGS MAIN MENU....................................................................................5-1
5.1.2 INTRODUCTION TO ELEMENTS......................................................................5-4
5.1.3 INTRODUCTION TO AC SOURCES..................................................................5-5
5.2 PRODUCT SETUP
5.2.1 SECURITY..........................................................................................................5-8
5.2.2 DISPLAY PROPERTIES ..................................................................................5-11
5.2.3 CLEAR RELAY RECORDS..............................................................................5-13
5.2.4 COMMUNICATIONS ........................................................................................5-14
5.2.5 MODBUS USER MAP......................................................................................5-31
5.2.6 REAL TIME CLOCK .........................................................................................5-32
5.2.7 OSCILLOGRAPHY...........................................................................................5-33
5.2.8 DATA LOGGER................................................................................................5-35
5.2.9 DEMAND..........................................................................................................5-36
5.2.10 USER-PROGRAMMABLE LEDS .....................................................................5-37
5.2.11 USER-PROGRAMMABLE SELF TESTS .........................................................5-41
5.2.12 CONTROL PUSHBUTTONS............................................................................5-41
5.2.13 USER-PROGRAMMABLE PUSHBUTTONS....................................................5-43
5.2.14 FLEX STATE PARAMETERS ..........................................................................5-48
5.2.15 USER-DEFINABLE DISPLAYS........................................................................5-49

GE Multilin N60 Network Stability and Synchrophasor Measurement System vii
TABLE OF CONTENTS
5.2.16 DIRECT INPUTS/OUTPUTS ...........................................................................5-51
5.2.17 TELEPROTECTION.........................................................................................5-59
5.2.18 INSTALLATION................................................................................................5-59
5.3 SYSTEM SETUP
5.3.1 AC INPUTS......................................................................................................5-61
5.3.2 POWER SYSTEM............................................................................................5-63
5.3.3 SIGNAL SOURCES.........................................................................................5-64
5.3.4 BREAKERS......................................................................................................5-66
5.3.5 DISCONNECT SWITCHES .............................................................................5-70
5.3.6 PHASOR MEASUREMENT UNIT....................................................................5-73
5.4 FLEXLOGIC™
5.4.1 INTRODUCTION TO FLEXLOGIC™...............................................................5-89
5.4.2 FLEXLOGIC™ RULES ....................................................................................5-98
5.4.3 FLEXLOGIC™ EVALUATION..........................................................................5-98
5.4.4 FLEXLOGIC™ EXAMPLE ...............................................................................5-99
5.4.5 FLEXLOGIC™ EQUATION EDITOR.............................................................5-103
5.4.6 FLEXLOGIC™ TIMERS.................................................................................5-103
5.4.7 FLEXELEMENTS™.......................................................................................5-105
5.4.8 NON-VOLATILE LATCHES ...........................................................................5-109
5.4.9 FLEXMATH....................................................................................................5-110
5.5 GROUPED ELEMENTS
5.5.1 OVERVIEW....................................................................................................5-113
5.5.2 SETTING GROUP .........................................................................................5-113
5.5.3 POWER SWING DETECT.............................................................................5-114
5.5.4 PHASE CURRENT ........................................................................................5-122
5.5.5 VOLTAGE ELEMENTS..................................................................................5-123
5.5.6 SUPERVISING ELEMENTS..........................................................................5-127
5.5.7 SENSITIVE DIRECTIONAL POWER.............................................................5-129
5.6 CONTROL ELEMENTS
5.6.1 OVERVIEW....................................................................................................5-132
5.6.2 SETTING GROUPS.......................................................................................5-132
5.6.3 SELECTOR SWITCH.....................................................................................5-133
5.6.4 UNDERFREQUENCY....................................................................................5-139
5.6.5 OVERFREQUENCY ......................................................................................5-140
5.6.6 SYNCHROCHECK.........................................................................................5-141
5.6.7 DIGITAL ELEMENTS.....................................................................................5-145
5.6.8 DIGITAL COUNTERS....................................................................................5-148
5.6.9 MONITORING ELEMENTS ...........................................................................5-150
5.6.10 FREQUENCY RATE OF CHANGE................................................................5-151
5.6.11 DIGITIZERS...................................................................................................5-153
5.6.12 8-BIT COMPARATORS.................................................................................5-156
5.6.13 8-BIT SWITCHES ..........................................................................................5-162
5.6.14 TRIP BUS.......................................................................................................5-164
5.7 INPUTS/OUTPUTS
5.7.1 CONTACT INPUTS........................................................................................5-166
5.7.2 VIRTUAL INPUTS..........................................................................................5-168
5.7.3 CONTACT OUTPUTS....................................................................................5-169
5.7.4 VIRTUAL OUTPUTS......................................................................................5-171
5.7.5 REMOTE DEVICES.......................................................................................5-172
5.7.6 REMOTE INPUTS..........................................................................................5-173
5.7.7 REMOTE OUTPUTS......................................................................................5-174
5.7.8 RESETTING...................................................................................................5-175
5.7.9 DIRECT INPUTS/OUTPUTS .........................................................................5-175
5.7.10 DIRECT ANALOG INPUTS AND OUTPUTS.................................................5-178
5.7.11 TELEPROTECTION INPUTS/OUTPUTS......................................................5-181
5.8 TRANSDUCER INPUTS/OUTPUTS
5.8.1 DCMA INPUTS ..............................................................................................5-183
5.8.2 RTD INPUTS..................................................................................................5-184
5.8.3 DCMA OUTPUTS ..........................................................................................5-185
5.9 TESTING
5.9.1 TEST MODE..................................................................................................5-189
5.9.2 FORCE CONTACT INPUTS..........................................................................5-189
5.9.3 FORCE CONTACT OUTPUTS......................................................................5-190
5.9.4 PHASOR MEASUREMENT UNIT TEST VALUES........................................5-191

viii N60 Network Stability and Synchrophasor Measurement System GE Multilin
TABLE OF CONTENTS
6. ACTUAL VALUES 6.1 OVERVIEW
6.1.1 ACTUAL VALUES MAIN MENU.........................................................................6-1
6.2 STATUS
6.2.1 CONTACT INPUTS ............................................................................................6-3
6.2.2 VIRTUAL INPUTS ..............................................................................................6-3
6.2.3 REMOTE INPUTS ..............................................................................................6-3
6.2.4 TELEPROTECTION INPUTS.............................................................................6-4
6.2.5 CONTACT OUTPUTS........................................................................................6-4
6.2.6 VIRTUAL OUTPUTS ..........................................................................................6-5
6.2.7 REMOTE DEVICES............................................................................................6-5
6.2.8 DIGITAL COUNTERS.........................................................................................6-6
6.2.9 SELECTOR SWITCHES ....................................................................................6-6
6.2.10 FLEX STATES....................................................................................................6-6
6.2.11 ETHERNET ........................................................................................................6-6
6.2.12 DIRECT INPUTS ................................................................................................6-7
6.2.13 DIRECT DEVICES STATUS ..............................................................................6-7
6.2.14 TELEPROTECTION CHANNEL TESTS.............................................................6-8
6.2.15 ETHERNET SWITCH .........................................................................................6-8
6.3 METERING
6.3.1 METERING CONVENTIONS .............................................................................6-9
6.3.2 SOURCES........................................................................................................6-12
6.3.3 SENSITIVE DIRECTIONAL POWER ...............................................................6-17
6.3.4 SYNCHROCHECK ...........................................................................................6-17
6.3.5 TRACKING FREQUENCY................................................................................6-17
6.3.6 FLEXELEMENTS™..........................................................................................6-17
6.3.7 DIGITIZERS......................................................................................................6-18
6.3.8 EIGHT-BIT COMPARATORS...........................................................................6-18
6.3.9 SUMMATOR.....................................................................................................6-18
6.3.10 DIRECT ANALOGS..........................................................................................6-19
6.3.11 IEC 61580 GOOSE ANALOG VALUES ...........................................................6-19
6.3.12 PHASOR MEASUREMENT UNIT ....................................................................6-19
6.3.13 TRANSDUCER INPUTS/OUTPUTS.................................................................6-20
6.4 RECORDS
6.4.1 EVENT RECORDS...........................................................................................6-21
6.4.2 OSCILLOGRAPHY...........................................................................................6-21
6.4.3 DATA LOGGER................................................................................................6-21
6.4.4 PHASOR MEASUREMENT UNIT RECORDS .................................................6-22
6.4.5 BREAKER MAINTENANCE .............................................................................6-22
6.5 PRODUCT INFORMATION
6.5.1 MODEL INFORMATION...................................................................................6-23
6.5.2 FIRMWARE REVISIONS..................................................................................6-23
7. COMMANDS AND
TARGETS 7.1 COMMANDS
7.1.1 COMMANDS MENU...........................................................................................7-1
7.1.2 VIRTUAL INPUTS ..............................................................................................7-1
7.1.3 CLEAR RECORDS.............................................................................................7-1
7.1.4 SET DATE AND TIME........................................................................................7-2
7.1.5 RELAY MAINTENANCE.....................................................................................7-3
7.1.6 PHASOR MEASUREMENT UNIT ONE-SHOT ..................................................7-3
7.2 TARGETS
7.2.1 TARGETS MENU...............................................................................................7-5
7.2.2 TARGET MESSAGES........................................................................................7-5
7.2.3 RELAY SELF-TESTS .........................................................................................7-5
8. COMMISSIONING 8.1 TESTING
8.1.1 TESTING UNDERFREQUENCY AND OVERFREQUENCY ELEMENTS.........8-1

GE Multilin N60 Network Stability and Synchrophasor Measurement System ix
TABLE OF CONTENTS
A. FLEXANALOG
PARAMETERS A.1 PARAMETER LIST
A.1.1 FLEXANALOG ITEMS.......................................................................................A-1
B. MODBUS
COMMUNICATIONS B.1 MODBUS RTU PROTOCOL
B.1.1 INTRODUCTION................................................................................................B-1
B.1.2 PHYSICAL LAYER.............................................................................................B-1
B.1.3 DATA LINK LAYER............................................................................................B-1
B.1.4 CRC-16 ALGORITHM........................................................................................B-2
B.2 MODBUS FUNCTION CODES
B.2.1 SUPPORTED FUNCTION CODES ...................................................................B-3
B.2.2 READ ACTUAL VALUES OR SETTINGS (FUNCTION CODE 03/04H) ...........B-3
B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)...........................................B-4
B.2.4 STORE SINGLE SETTING (FUNCTION CODE 06H).......................................B-4
B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H) ................................B-5
B.2.6 EXCEPTION RESPONSES...............................................................................B-5
B.3 FILE TRANSFERS
B.3.1 OBTAINING RELAY FILES VIA MODBUS........................................................B-6
B.3.2 MODBUS PASSWORD OPERATION ...............................................................B-7
B.4 MEMORY MAPPING
B.4.1 MODBUS MEMORY MAP .................................................................................B-8
B.4.2 DATA FORMATS.............................................................................................B-62
C. IEC 61850
COMMUNICATIONS C.1 OVERVIEW
C.1.1 INTRODUCTION................................................................................................C-1
C.1.2 COMMUNICATION PROFILES.........................................................................C-1
C.2 SERVER DATA ORGANIZATION
C.2.1 OVERVIEW........................................................................................................C-2
C.2.2 GGIO1: DIGITAL STATUS VALUES .................................................................C-2
C.2.3 GGIO2: DIGITAL CONTROL VALUES..............................................................C-2
C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM RECEIVED GOOSE
DATAC-2
C.2.5 GGIO4: GENERIC ANALOG MEASURED VALUES.........................................C-2
C.2.6 MMXU: ANALOG MEASURED VALUES...........................................................C-3
C.2.7 PROTECTION AND OTHER LOGICAL NODES...............................................C-3
C.3 SERVER FEATURES AND CONFIGURATION
C.3.1 BUFFERED/UNBUFFERED REPORTING........................................................C-5
C.3.2 FILE TRANSFER...............................................................................................C-5
C.3.3 TIMESTAMPS AND SCANNING.......................................................................C-5
C.3.4 LOGICAL DEVICE NAME..................................................................................C-5
C.3.5 LOCATION.........................................................................................................C-5
C.3.6 LOGICAL NODE NAME PREFIXES..................................................................C-6
C.3.7 CONNECTION TIMING .....................................................................................C-6
C.3.8 NON-IEC 61850 DATA ......................................................................................C-6
C.3.9 COMMUNICATION SOFTWARE UTILITIES.....................................................C-6
C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE
C.4.1 OVERVIEW........................................................................................................C-7
C.4.2 GSSE CONFIGURATION..................................................................................C-7
C.4.3 FIXED GOOSE ..................................................................................................C-7
C.4.4 CONFIGURABLE GOOSE.................................................................................C-7
C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE...........................................C-9
C.4.6 GSSE ID AND GOOSE ID SETTINGS............................................................C-10
C.5 IEC 61850 IMPLEMENTATION VIA ENERVISTA UR SETUP
C.5.1 OVERVIEW......................................................................................................C-11
C.5.2 CONFIGURING IEC 61850 SETTINGS...........................................................C-12
C.5.3 ABOUT ICD FILES...........................................................................................C-13
C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP..............................C-17
C.5.5 ABOUT SCD FILES.........................................................................................C-17

x N60 Network Stability and Synchrophasor Measurement System GE Multilin
TABLE OF CONTENTS
C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP...........................C-20
C.6 ACSI CONFORMANCE
C.6.1 ACSI BASIC CONFORMANCE STATEMENT ................................................C-22
C.6.2 ACSI MODELS CONFORMANCE STATEMENT............................................C-22
C.6.3 ACSI SERVICES CONFORMANCE STATEMENT.........................................C-23
C.7 LOGICAL NODES
C.7.1 LOGICAL NODES TABLE...............................................................................C-26
D. IEC 60870-5-104 COMMS. D.1 IEC 60870-5-104 PROTOCOL
D.1.1 INTEROPERABILITY DOCUMENT...................................................................D-1
D.1.2 POINTS LIST.....................................................................................................D-9
E. DNP COMMUNICATIONS E.1 DEVICE PROFILE DOCUMENT
E.1.1 DNP V3.00 DEVICE PROFILE..........................................................................E-1
E.1.2 IMPLEMENTATION TABLE ..............................................................................E-4
E.2 DNP POINT LISTS
E.2.1 BINARY INPUT POINTS ................................................................................... E-8
E.2.2 BINARY AND CONTROL RELAY OUTPUT......................................................E-9
E.2.3 COUNTERS.....................................................................................................E-10
E.2.4 ANALOG INPUTS............................................................................................E-11
F. MISCELLANEOUS F.1 CHANGE NOTES
F.1.1 REVISION HISTORY......................................................................................... F-1
F.1.2 CHANGES TO THE MANUAL........................................................................... F-1
F.2 ABBREVIATIONS
F.2.1 STANDARD ABBREVIATIONS......................................................................... F-4
F.3 WARRANTY
F.3.1 GE MULTILIN WARRANTY............................................................................... F-6
INDEX