manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Gecko
  6. •
  7. Keypad
  8. •
  9. Gecko in.k800 Reference guide

Gecko in.k800 Reference guide

Power
Press any button to turn the keypad on.
After 30 minutes without activity it will shut off.
Main screen
The main screen gives you access to your
accessories and water temperature. At the bottom
of the screen you will see any error or maintenance
messages that are present.
Start or stop accessories
To start or stop an accessory, press the associated
button. Icons will become animated when their
accessory is turned on , and inanimate when turned
off. Icons on the screen will reflect the speed
or state of the devices running on your spa.
When an accessory has more than two states,
press the button until it reaches the desired state.
Water temperature
The temperature shown at the bottom of the screen
gives the actual water temperature.
Use the Up and Down buttons to set the desired
temperature. The set point will appear in blue.
After 3 seconds without any change to the set
temperature value, the current water temperature
will reappear.
Description
Main functions
9919-101201-A www.geckoalliance.com
Quick Reference Card
Please consult your spa user manual for complete info on the features of your spa system.
in.k800™
intuitive color keypad
With its bright, full color display, the in.k800 provides an intuitive
user experience, while its screen’s high resolution brings hot tub user
interfaces to a new level. Loaded with a large amount of memory and
a powerful on-board processor we have created the seamless
graphic interface that spa users have been waiting for.
*Functions for keys 1 to 5 will depend on your system's low level conguration.
Settings
Key 2
Key 3
Key 1
Mode
(optional)
Up
Key 4
Key 5
Down
Selection lights Light/ Key 6
Audio
The in.k800 can be used with either the in.tune
or in.stream audio system. The Audio section
in the Settings menu gives you the option
to disconnect or unpair your Bluetooth enabled
device when using the in.stream.
The Mode key (audio access) is only present/
functional when the spa is equipped with a Gecko
audio component (in.stream or in.tune).
The keypad will be set appropriately in the factory.
in.stream operation
Press the Mode key to access your in.stream.
If you are using a device with Bluetooth technology,
it must be connected for functions to work.
Please note that the Play/Pause and Change
Track functions apply to devices using Bluetooth
technology only, and will not work when AUX
is selected as the source.
Selecting the source
Press the Bluetooth key to select a device using Bluetooth
wireless technology.
Press the Source key to use a device connected
to the auxiliary cable.
If no source is selected, the in.stream system
will use the last selected source.
Play/Pause audio
Press the Play/Pause button to start or pause the audio
Adjusting the volume
Press the Volume Up or the Volume Down key to increase
or decrease the volume.
Changing tracks
Use the Last Track and Next Track keys to change tracks
Disconnect or Unpair Bluetooth
These options can be found under the Audio section
in the Settings menu.
Settings
Settings
From the home page you can access the Settings,
where you will find:
• Water care
• Audio
• Date and Time
• Keypad Settings
• Electrical Conguration
• About
Use the arrow keys to move up and down
in the list. To select an option, press the lit button
beside it (key 2).
At any point you can press the Settings button
to return to the home screen.
Water care
The Water Care section will help you set up your
ideal filtration and heating settings. Choose a mode
depending on your need.
Use key 2 to choose your setting. A checkmark
will appear on the selected icon to confirm.
In Energy Savings mode, the set point will
be reduced by 20°F*, which means that the heating
system will not be engaged unless the temperature
falls to 20°F below the spa's set temperature.
If your spa uses a circulation pump configured
to run 24 hours, the screen will show you
the purge setting instead of filtration. The purges
are pre-programmed for a fixed number of minutes,
therefore the duration will be set to N/A
on the screen, and only the start time can
be modified.
*Default pack value
Water care modes
Away from home:
In this mode the spa will always be in
economy; the set point will be reduced
by 20° F and filtration will be reduced.
Beginner:
The spa will never be in economy mode,
and will run a normal 8 hours of filtration a day.
Energy Savings:
The spa will be in economy mode during
the peak hours of the day and resume normal
mode on the weekend.
Super Energy Savings:
The spa will always in economy mode during
peak hours, every day of the week.
Weekender:
The spa will be in economy mode from
Monday to Friday, and will run normally
on the weekend.
Date and time
Here you can adjust the time format, and change
the year, date, and time. Use the arrows to choose
the setting that you want to adjust, and select
it by pressing key 2. Use the arrow buttons
to change the parameters, and key 2 to move
between parameters. Key 1 will take you back
to the main Settings menu.
Modifying schedules
To modify a Water Care category, use the lit button
to the right (key 5) to open the selected
Water Care menu.
You can add schedules by scrolling down to Add,
and selecting with key 2.
To delete a schedule, press the lit button next
to the garbage can icon on the top right
of the screen.
You can modify the programmed schedules
by selecting one and adjusting the schedule
using the arrow keys. Use key 2 to move
between parameters.
You have several possibilities for the schedule
(Mon-Fri, weekend, every day, or single days).
The schedules will be repeated every week.
The time and duration are set in 30 minute
increments. Once you have set the schedule,
use key 1 to go back. Ensure that you have selected
the desired Water Care option in the main
Water Care menu.
Keypad settings
In this section you can change the temperature unit
and language. Use the arrow keys, and move
to the setting that you would like to change.
Use key 2 to choose, and then the arrow keys
to modify.
Electrical configuration
Please do not make changes in this section unless
you are a qualified electrician.
In this section you can change the low-level
configuration, number of phases, and input current.
Use the arrow keys to scroll between selections,
key 2 to choose and move between parameters.
Please refer to the TechBook for your specific
spa pack for details about the low level settings.
Once you have reached Number of Phases
in the menu, you cannot use the arrow keys
to go back up to Low-level Configuration. Please
go back and re-enter the Electrical Config menu.
About
This section shows information about the in.k800
software number, and the revision numbers
of the different components of your system.
Audio
in.tune operation
Press the Mode key to access your in.tune.
Turning power on/off
Press the Power key to turn the in.tune on or off.
Selecting the source
Press the Source key to choose between CD, Auxiliary
input, and Radio. If no source is selected, the in.tune
will use the last selected source.
Play/Pause audio
Press the Play/Pause key to start or pause the audio.
Adjusting the volume
Press the Volume Up or the Volume Down key
to increase or decrease the volume.
Changing tracks
Use the Last Track and Next Track keys to change tracks
for the CD or AUX input. When in Radio mode,
the Last Track and Next Track keys will move through
preset radio stations on the selected band. To change
bands or preset stations, see your in.tune manual.
Audio
The in.k800 can be used with either the in.tune
or in.stream audio system. The Audio section
in the Settings menu gives you the option
to disconnect or unpair your Bluetooth enabled
device when using the in.stream.
The Mode key (audio access) is only present/
functional when the spa is equipped with a Gecko
audio component (in.stream or in.tune).
The keypad will be set appropriately in the factory.
in.stream operation
Press the Mode key to access your in.stream.
If you are using a device with Bluetooth technology,
it must be connected for functions to work.
Please note that the Play/Pause and Change
Track functions apply to devices using Bluetooth
technology only, and will not work when AUX
is selected as the source.
Selecting the source
Press the Bluetooth key to select a device using Bluetooth
wireless technology.
Press the Source key to use a device connected
to the auxiliary cable.
If no source is selected, the in.stream system
will use the last selected source.
Play/Pause audio
Press the Play/Pause button to start or pause the audio
Adjusting the volume
Press the Volume Up or the Volume Down key to increase
or decrease the volume.
Changing tracks
Use the Last Track and Next Track keys to change tracks
Disconnect or Unpair Bluetooth
These options can be found under the Audio section
in the Settings menu.
Settings
Settings
From the home page you can access the Settings,
where you will find:
• Water care
• Audio
• Date and Time
• Keypad Settings
• Electrical Conguration
• About
Use the arrow keys to move up and down
in the list. To select an option, press the lit button
beside it (key 2).
At any point you can press the Settings button
to return to the home screen.
Water care
The Water Care section will help you set up your
ideal filtration and heating settings. Choose a mode
depending on your need.
Use key 2 to choose your setting. A checkmark
will appear on the selected icon to confirm.
In Energy Savings mode, the set point will
be reduced by 20°F*, which means that the heating
system will not be engaged unless the temperature
falls to 20°F below the spa's set temperature.
If your spa uses a circulation pump configured
to run 24 hours, the screen will show you
the purge setting instead of filtration. The purges
are pre-programmed for a fixed number of minutes,
therefore the duration will be set to N/A
on the screen, and only the start time can
be modified.
*Default pack value
Water care modes
Away from home:
In this mode the spa will always be in
economy; the set point will be reduced
by 20° F and filtration will be reduced.
Beginner:
The spa will never be in economy mode,
and will run a normal 8 hours of filtration a day.
Energy Savings:
The spa will be in economy mode during
the peak hours of the day and resume normal
mode on the weekend.
Super Energy Savings:
The spa will always in economy mode during
peak hours, every day of the week.
Weekender:
The spa will be in economy mode from
Monday to Friday, and will run normally
on the weekend.
Date and time
Here you can adjust the time format, and change
the year, date, and time. Use the arrows to choose
the setting that you want to adjust, and select
it by pressing key 2. Use the arrow buttons
to change the parameters, and key 2 to move
between parameters. Key 1 will take you back
to the main Settings menu.
Modifying schedules
To modify a Water Care category, use the lit button
to the right (key 5) to open the selected
Water Care menu.
You can add schedules by scrolling down to Add,
and selecting with key 2.
To delete a schedule, press the lit button next
to the garbage can icon on the top right
of the screen.
You can modify the programmed schedules
by selecting one and adjusting the schedule
using the arrow keys. Use key 2 to move
between parameters.
You have several possibilities for the schedule
(Mon-Fri, weekend, every day, or single days).
The schedules will be repeated every week.
The time and duration are set in 30 minute
increments. Once you have set the schedule,
use key 1 to go back. Ensure that you have selected
the desired Water Care option in the main
Water Care menu.
Keypad settings
In this section you can change the temperature unit
and language. Use the arrow keys, and move
to the setting that you would like to change.
Use key 2 to choose, and then the arrow keys
to modify.
Electrical configuration
Please do not make changes in this section unless
you are a qualified electrician.
In this section you can change the low-level
configuration, number of phases, and input current.
Use the arrow keys to scroll between selections,
key 2 to choose and move between parameters.
Please refer to the TechBook for your specific
spa pack for details about the low level settings.
Once you have reached Number of Phases
in the menu, you cannot use the arrow keys
to go back up to Low-level Configuration. Please
go back and re-enter the Electrical Config menu.
About
This section shows information about the in.k800
software number, and the revision numbers
of the different components of your system.
Audio
in.tune operation
Press the Mode key to access your in.tune.
Turning power on/off
Press the Power key to turn the in.tune on or off.
Selecting the source
Press the Source key to choose between CD, Auxiliary
input, and Radio. If no source is selected, the in.tune
will use the last selected source.
Play/Pause audio
Press the Play/Pause key to start or pause the audio.
Adjusting the volume
Press the Volume Up or the Volume Down key
to increase or decrease the volume.
Changing tracks
Use the Last Track and Next Track keys to change tracks
for the CD or AUX input. When in Radio mode,
the Last Track and Next Track keys will move through
preset radio stations on the selected band. To change
bands or preset stations, see your in.tune manual.
Power
Press any button to turn the keypad on.
After 30 minutes without activity it will shut off.
Main screen
The main screen gives you access to your
accessories and water temperature. At the bottom
of the screen you will see any error or maintenance
messages that are present.
Start or stop accessories
To start or stop an accessory, press the associated
button. Icons will become animated when their
accessory is turned on , and inanimate when turned
off. Icons on the screen will reflect the speed
or state of the devices running on your spa.
When an accessory has more than two states,
press the button until it reaches the desired state.
Water temperature
The temperature shown at the bottom of the screen
gives the actual water temperature.
Use the Up and Down buttons to set the desired
temperature. The set point will appear in blue.
After 3 seconds without any change to the set
temperature value, the current water temperature
will reappear.
Description
Main functions
9919-101201-A www.geckoalliance.com
Quick Reference Card
Please consult your spa user manual for complete info on the features of your spa system.
in.k800™
intuitive color keypad
With its bright, full color display, the in.k800 provides an intuitive
user experience, while its screen’s high resolution brings hot tub user
interfaces to a new level. Loaded with a large amount of memory and
a powerful on-board processor we have created the seamless
graphic interface that spa users have been waiting for.
*Functions for keys 1 to 5 will depend on your system's low level conguration.
Settings
Key 2
Key 3
Key 1
Mode
(optional)
Up
Key 4
Key 5
Down
Selection lights Light/ Key 6

Other manuals for in.k800

2

Other Gecko Keypad manuals

Gecko Aeware in.k100 Series User manual

Gecko

Gecko Aeware in.k100 Series User manual

Gecko in.k800 User manual

Gecko

Gecko in.k800 User manual

Gecko IN.K19-2OP Reference guide

Gecko

Gecko IN.K19-2OP Reference guide

Gecko in.k800 Reference guide

Gecko

Gecko in.k800 Reference guide

Gecko in.k1000 Reference guide

Gecko

Gecko in.k1000 Reference guide

Gecko k-35-in Series Reference guide

Gecko

Gecko k-35-in Series Reference guide

Gecko Aeware in.k200 series Reference guide

Gecko

Gecko Aeware in.k200 series Reference guide

Gecko Aeware k-19-in Reference guide

Gecko

Gecko Aeware k-19-in Reference guide

Gecko in.k175 Aeware Operating instructions

Gecko

Gecko in.k175 Aeware Operating instructions

Gecko in.xe Technical manual

Gecko

Gecko in.xe Technical manual

Gecko INK 500 Specification sheet

Gecko

Gecko INK 500 Specification sheet

Gecko in.k1000 Reference guide

Gecko

Gecko in.k1000 Reference guide

Gecko in.k300 User manual

Gecko

Gecko in.k300 User manual

Gecko iTouch Reference guide

Gecko

Gecko iTouch Reference guide

Gecko Aeware Advanced in.k600 Reference guide

Gecko

Gecko Aeware Advanced in.k600 Reference guide

Popular Keypad manuals by other brands

Digiplex DGP-641 user manual

Digiplex

Digiplex DGP-641 user manual

Honeywell Ademco 6164US Installation and setup guide

Honeywell

Honeywell Ademco 6164US Installation and setup guide

Nidac PRESCO PRE Series user guide

Nidac

Nidac PRESCO PRE Series user guide

Homewerks HQ-J-DK420-WH installation instructions

Homewerks

Homewerks HQ-J-DK420-WH installation instructions

Emerson CONTROL TECHNIQUES Digitax ST DST Keypad manual

Emerson

Emerson CONTROL TECHNIQUES Digitax ST DST Keypad manual

Philips Home Access 1000 Series user manual

Philips

Philips Home Access 1000 Series user manual

Apricorn Aegis Fortress user guide

Apricorn

Apricorn Aegis Fortress user guide

GE KTD-405 user manual

GE

GE KTD-405 user manual

Ramset Gate Openers Heddolf Programming instructions

Ramset Gate Openers

Ramset Gate Openers Heddolf Programming instructions

Bosch VIDEOJET decoder 3000 Quick user guide

Bosch

Bosch VIDEOJET decoder 3000 Quick user guide

Digital Monitoring Products 9000 series installation guide

Digital Monitoring Products

Digital Monitoring Products 9000 series installation guide

Texecom Premier LCDLP installation manual

Texecom

Texecom Premier LCDLP installation manual

Ksenia ergo wls KSI2100022.301 manual

Ksenia

Ksenia ergo wls KSI2100022.301 manual

Xantech MRC44KP installation instructions

Xantech

Xantech MRC44KP installation instructions

Tekno K1 quick start guide

Tekno

Tekno K1 quick start guide

Alarm Lock A-100 - A-100IMWP manual

Alarm Lock

Alarm Lock A-100 - A-100IMWP manual

Russound V-KP-1 product manual

Russound

Russound V-KP-1 product manual

AJAX Fibra user manual

AJAX

AJAX Fibra user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.