General DCS1600ART User manual

DCS1600ART
USER’S MANUAL
ARTICULATING BORESCOPE PROBE
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 1

2
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 2

3
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 3

Product Features
(1) Insert Tube
(2) Camera Lens
(3) Bending Neck
(4) Console
(5) Control Wheel
(6) Connecting Cable
(7) Connector
(1)
(2)
(4)
(5)
(7)
(3)
4
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 4

5
2
) Getting Started
Step 1 Connect Articulation handle with your fasta. And
then tighten the screw nut.
Step 2 Press and hold down the button on your Fasta console
for 3seconds until the image is displayed on the monitor.
Step 3 Aim the camera lens at the selected object. Press to
capture a .JPG image, or to begin recording a .ASF
video.
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 5

6
3) Manipulate
Moving View
Want to bend the tip right side, just rotate the control wheel clock
wise. Want to bend to the left side, just rotate the wheel counter clock
wise.
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 6

7
Lock
Twist the knob clockwise to lock bending neck in place. When you
want to fix the bending neck angle, just twist the lock shaft clock wise
to the lock position.
Light Adjustment
Twisting light adjusting wheel on your Fasta consle to adjust the
brightness of the light source.
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 7

8
4) Specification
Camera system & Insert tube
Insert tubes diameter 6.0 mm
Rescolution 325(H)*250(V)
Housing stainless Steel
Light Sour
c e
White LED
Length 1M (Option: 2M, 3M)
Field of View Horizontal field angle 46 º
Vertical field angle 34º
Diagonal field angle 56º
Depth of Field
(DOF)
1cm~6cm
Working Temperature 32° to 131°F (0° to 55°C)
Articulation Angle 2 Way
Articulation Radius 1.89+/- .04" (48 +/-1mm)
Handle
Dimensions 5.5x1.4x1.3" (139x35x32mm)
Weight 7.8 oz. (.220kg)
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 8

9
5) Trouble Shooting
1.Unable to turn on the console
Users will not be able to turn on the console when the battery is very
low or empty. Please re-charge before use.
2.Can turn on the unit but the image does not appear on the monitor
Please check the insertion tube connector or simply re-connect the
insertion tube to correct the problem.
3.Unable to capture photos/videos
Please check the status of the SD card. Users will not be able to
capture photos or video if the SD card is not installed properly or if it
is full, write protected or damaged.
6) Insert Tube Maintenance
•To avoid danger, please do not put the insert tube into any flammable
liquid or gas.
•The insert tube contains a series of small wires that control the optics
and electronics of the camera tip. To ensure long-term reliability, do
not bend the insert tube more than 180 degrees, and always bend
the insert tube in as large an arc as possible during usage and
storage.
7) Camera and Lens cleaning
•User may clean the camera lens with a cotton swab and small
amount of cleaning naphtha.
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 9

10
•The articulation handle is designed for industrial use only. Do not use
the system for human or any other biological inspection.
•Do not insert the insert tube into any flammable gas or liquid (such as
a fuel tank) to avoid dangers.
•Do not use the articulation handle in a fuel tank or other dangerous
environments such as a gasoline or alcohol storage tank.
•Do not use any corrosive liquid for cleaning, such as alcohol.
•Do not try to disassemble the product. This presents a shock hazard
and could damage the unit.
•Do not bend the insert tube over 180 degrees during usage or
storage.
•Please use only recommended components or accessories.
Unapproved accessories and components may cause damage.
•Please do not use the articulation handle in a medical facility or on
an airplane, as the wireless signal may interfere with other critical
equipment nearby.
•Avoid direct exposure to sunlight for long periods of time.
•Store the system in a cool, dry and well-ventilated place.
•Store the system in a cool, dry and well-ventilated place.
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 10

11
Notes
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 11

GENERAL TOOLS & INSTRUMENTS
80 White Street New York, NY 10013-3567
PHONE [phone] • FAX [phone]
TOLL FREE [phone]
e-mail: [email protected]
www.generaltools.com
DCS1600 User’s Manual
Specifications subject to change without notice.
©2010 GENERAL TOOLS & INSTRUMENTS
NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
MAN#DCS1600 7/10
DCS1600-1P-070310:Layout 1 7/3/10 12:36 PM Page 12