General DCS200 User manual

Please read this manual carefully and thoroughly before using this product.
THE SEEKER™200 SERIES &
THE SEEKER™300 SERIES
VIDEO INSPECTION SYSTEMS
DCS200/DCS200-09/DCS200-05
DCS300/DCS300-09/DCS355
USER’S MANUAL
DCS200
(shown)
DCS300
(shown)

CO TE TS
Introdu tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Probe Tip A essories . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Produ t Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Dis onne ting and Re onne ting the Probe . . . . . . . 6
Installing the Accessories . . . . . . . . . . . . . . . . . . . . . . . 6
Operating Instru tions . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Image Rotation and Zoom Operation . . . . . . . . . . . . . . 7
Camera Tipped Probes . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maintenan e Instru tions . . . . . . . . . . . . . . . . . . . . . . . 9
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Spe ifi ations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Return For Repair Poli y . . . . . . . . . . . . . . . . . . . . . . . 11

3
I TRODUCTIO
The Seeker™200 and Seeker 300 Series Inspection Systems have
been desi ned as a user friendly and economical way of viewin
hidden problems and increasin productivity. Each system has a
hi h clarity color LCD for clear ima in . The differences between the
3 systems are the size of the screen and the diameter of the probes.
The Seeker™200 Series has a 2.4" (60.9mm) dia onal screen and the
Seeker™300 Series has a 3.5" (88.9mm) dia onal screen. The camera
head is housed inside the tip of each probe with adjustable white
LED li hts, which helps you to see in those dark aps and holes.
These video inspection systems have the advanta e of clear ima es,
easy operation and portability. They are widely used in applications
such as HVAC/R buildin , aviation and vehicles maintenance.
FEATURES
•DCS200 Series: 2.4" (60.9mm) Color LCD Screen
for a crystal clear image
•DCS300 Series: 3.5" (88.9mm) Color LCD Screen
for superb clarity and viewing effect
• Camera-tipped probes are flexible and strong with built-in
adjustable LED lighting, and are slim enough to perform
automotive engine check-up
• Flexible probes retain configured shape to suit
different inspection needs
• View findings instantaneously
• 2X digital zoom and 180º image rotation
• Optional probes of different diameters and lengths
• All probes are interchangeable between DCS100, DCS200,
DCS300 and DCS400 series

PRODUCT OVERVIEW
A. LCD Screen
B. Image Rotation
C. Image Zoom
D. Battery Compartment
E. ON/OFF Switch /
LED Lighting Intensity
F. Probe Connector
G. Probe
. Camera ead
12mm Probe accessories
I. Magnetic Tip
J. ook Tip
K. 45º Mirror Tip
4
F
D
G
Fig. 1
Fig. 2
H
A
E
B
C
I
J
K
LM
5mm Probe accessories
L. Mirror
M. Thread Protector
N. Ball Guide
9.0mm Probe accessories
O. Mirror
P. Thread Protector
Q. Magnet
R. ook
12mmProbeaccessories
5.5mmProbeaccessories
ORQP
9.0mmProbeaccessories

5
BATTERY I STALLATIO
1. Use the included Phillips screwdriver to open the screw on
the battery compartment cover (See Fig. 3).
2. Insert one “9V” alkaline battery into the battery
compartment (See Fig. 4). Close the battery cover and fasten
the screw.
PRECAUTIO S!
• Remove the battery before storing the unit for a long
period of time.
• Be sure to install the battery with the correct polarity as
indicated in the battery compartment.
• Properly dispose of the batteries. Exposure to high
temperatures can cause the batteries to explode.
Do not dispose in fire. Place tape over the terminals
to prevent direct contact with other objects. Some
countries have regulations concerning battery disposal.
Please follow all applicable regulations.
Fig. 3
Battery
Compartment
Cover
Screw
Fig. 4
Battery
Compartment

6
DISCO ECTI G A D
RECO ECTI G THE PROBE:
All of the probes from these
3 systems are interchange-
able and in the case of the
12mm dia. probe, you can
add extensions to extend the
camera tip up to 16 ft. (5m).
To disconnect the probe
from the display unit, twist
the retaining collar counter clockwise several turns and pull
away from the unit. Then pull the probe straight away from the
unit. To reconnect the probe or probe extensions to the
display unit, make sure the keyed ends are properly aligned
(See Fig. 5). Once they are aligned, tighten the retaining collar
by twisting it clockwise.
I STALLI G ACCESSORIES: (From Fig. 2)
12mm dia. tip: The three accessories include mirror tip, hook
tip and magnetic tip. All are attached to the camera head
the same way. As shown in Fig. 6, slip the semicircle end of
the accessory over the flats of the camera head and then
press down to fix as shown in Fig. 7.
5.5mm dia. tip and and 9.0mm dia. tip: Each of the three
accessories screw directly onto the top of the probe.
The thread protector is used when the mirror or the ball guide
are not attached.
Fig. 6 Fig. 7
Accessory
Keye En s
Fig. 5

7
OPERATI G I STRUCTIO S
BASIC OPERATION:
To turn the unit on, hold the LCD display unit facing you
(See Fig. 8). Roll the on/off/brightness switch away from you
to turn the power on. The switch then acts as a dimmer for the
LED’s in the tips of the probes. Activating the switch also
illuminates the LCD screen. Note: There is no auto off. Make
sure to roll the switch back towards you until it clicks to turn
off the unit after use.
IMAGE ROTATION AND ZOOM OPERATION
The left button on the back of the monitor housing is the
“Image Rotation” button. Press once to flip image (seen in the
LCD monitor) by 180º. The right side button is the “Zoom”
button. Press this multiple times to achieve a full 2X enlarge-
ment of the image (seen in the monitor).
LCDScreen
RotationButton
ZoomButton
ON/OFF
BRIGHTNESS
Fig. 8

8
OPERATI G PRECAUTIO S!
• Maximum bending radius is 2"; exceeding this may damage
the probe.
• Do not use the probe (camera head) to clear pathways or
clogged areas.
• The hand-held display unit is NOT waterproof and may
become damaged when exposed to water. The camera head
of the probe and its cover are waterproof, but NOT acid-proof
or fireproof. Exposure to these materials will damage the
camera heads protective plastic. Avoid submerging the
camera head into corrosive solvents. Do not expose to high
temperatures.
• Do not place the camera head or probe into areas that may
contain exposed live electrical wires.
For construction: When inspecting inside walls, make sure
there are no exposed live wires, if you are not sure, shut off
the circuit breaker to the whole area before probing with
the scope.
For automobile engine inspections: Be sure the automobile is
not running during inspection. Metal and liquid under the
hood may be hot. Don’t submerge the camera head in oil
or gasoline.
Camera
LED LED
12mmprobetip 5.5mmprobetip 9mmprobetip
LED
LED
LED
LED
LED
LED
LED
LED
Camera
Camera
CAMERA TIPPED PROBES

9
TROUBLE SHOOTI G
Display is on,
but no image
The product
won’t turn on
The probes
connection to the
main grip is loose
Tighten connection
and try again
Clean camera head
Cameras head
covered by
debris or safety
cap is on
• LED’s on the camera
head are dim at
max bright
• Color display
changes to
black and white
• Color display turns
itself off after a
period of time
Low battery Replace battery
Dead battery Replace battery
Symptoms Reasons Solutions
MAI TE A CE I STRUCTIO S
• Service must be performed by qualified repair personnel.
• When servicing this product, only use identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions will void the warranty.
• Disassembling this unit will void the warranty.
• Do not use acetones to clean this product. Use mild soap
and a soft cloth to clean. Gently clean the LCD with a dry
cloth.

10
DCS200 2.4" (60.9mm) TFT/LCD
Series
Image Display DCS300 3.5"(88.9mm) TFT/LCD
Series
2x digital zoom
180º image rotation
Resolution 320 x 240 pixels
Probe Length (supplied) 39" (1m)
Light Source Adjustable LED
Power Source One “9V” alkaline battery
Estimated Battery Life About 2.5 hours
Operating Temperature 32° to 113°F (0° to 45°C)
Operating umidity 5% to 95%R non-condensing
Storage Temperature -4° to 140°F (-20° to 60°C)
≤85% (w/o battery)DCS200 8.5 x 4.6 x 3.2 in.
Series (215 x 156 x 80mm)
Body Dimensions
DCS300 8.5 x 4.6 x 3.8 in.
Series (215 x 156 x 96mm)
Weight Approx. 16 oz. (454g)
CAMERA TIPPED PROBES
12mm 9mm 5.5mm
Resolution (pixels NTSC) 320 x 240 320 x 240 320 x 240
Resolution (pixels PAL) 704 x 576 704 x 576 704 x 576
inimmum Focus Distance 100mm (4") 10mm (0.5 in.)
Field of View 60º 60º 60º
SPECIFICATIO S

WARRA TY I FORMATIO
THREE YEAR LIMITED WARRANTY
The General Tools & Instruments (General®) DCS200 Series and DCS300 Series
digital video Inspection Systems are warranted to the original purchaser to be free
from defects in material and workmanship for a period of three (3) years. Subject
to certain restrictions, General will repair or replace this instrument, if after exam-
ination, it is determined by General to be defective in material or work manship.
This warranty does not apply to damages that General determines to be from
an attempted repair by non-authorized personnel or misuse, alterations, normal
wear and tear or accidental damage. The defective unit must be returned to
General Tools & Instruments or a General authorized service center, freight
prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described
herein is a condition of the contract for purchase of this product. In no event shall
General be liable for any incidental, special, consequential or punitive damages,
or any cost, attorneys fees, expenses, losses alleged to be as a consequence of
any damage due to failure of, or defect in any product including, but not limited
to, any claims for loss of profits.
TIP! ost parts of this products can be recycled.
Please refer to your local regulations for proper disposal.
RETUR FOR REPAIR POLICY
Every effort has been made to provide you with a reliable, product of superior qual-
ity. However, in the event your instrument requires repair, please contact our Cus-
tomer Service to obtain a RGA# (Return Goods Authorization) before forwarding the
unit via prepaid freight to the attention of our Service Center at this address:
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
Remember to include a copy of your proof of purchase, your return address, and
your phone number and/or e-mail address.
11

GE ERAL TOOLS & I STRUME TS
80 White Street
ew York, Y 10013-3567
PHO E [phone]
FAX [phone]
TOLL FREE [phone]
e-mail: [e-mail]
www.generaltools.com
DCS200/DCS300 Series User’s Manual
Specifications subject to change
without notice
©2010 GENERAL TOOLS & INSTRUMENTS
NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAP ICAL ERRORS.
MAN#DCS200/DCS300 Series
11/23/10