Georgia Pacific GP PRO Dixie Ultra SmartStock Tri-Tower User manual

Specification Sheet: DUSSTDSP3
GP PRO Dixie Ultra™ SmartStock® Tri-Tower Cutlery Dispenser
For questions or replacement parts,
please call: 1-866-HELLOGP
(1-866-435-5647). www.gppro.com
26.65”
11.32”
12.74”
10.53”
29”
9.60”
Weight: 22.2lbs
Specifications: Impact resistant plastic
D-100467 REV B © 2019 GP PRO. All rights reserved.
1Wall Mounting:
Position unit on wall so that the top is level.
Open front cover and mark screw locations
where indicated with circles. If using a
mounting bracket, mark locations of shaded
areas shown, then skip to step 3
NOTE: Mount Dispenser to wall in
accordance to local ADA compliance
2Secure unit to wall with four (4) anchored
screws appropriate to your wall type in
locations previously marked.

3If using mounting bracket, align keyhole slots
with areas marked from step 1. For accessories or
replacement components, please call:
1-866-HELLOGP (1-866-435-5647)
4Ensure that the arrows on the bracket are
pointing upwards and the top is level. Place the
mounting bracket on wall, lining up keyhole slots
with shaded areas previously marked. Use four
(4) anchored screws appropriate to the type of
wall in the keyhole slots indicated to secure
bracket.
5Fit dispenser onto bracket. Lock into place by
gently pulling downward. Listen for a click
indicating dispenser is properly secured.