Gima 27800 User manual

1
27800 – 27801
M27800-M-Rev.0-04.20
BARELLE CORSIA
PATIENT TROLLEYS
•Ènecessariosegnalarequalsiasiincidentegraveverificatosiinrelazionealdispositivomedicodanoifornito
alfabbricanteeall’autoritàcompetentedelloStatomembroincuisihasede.
•Allseriousaccidentsconcerningthemedicaldevicesuppliedbyusmustbereportedtothemanufacturer
andcompetentauthorityofthememberstatewhereyourregisteredofficeislocated.
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [e-mail]
www.gimaitaly.com
Made in Italy

7ENGLISH
PRODUCTS:
-27800 Fixed patient trolley
-27801 Patient trolley with removable top
INTRODUCTION
In accord with Regulation (EU) 2017/745, this product is part of the CLASS I MEDICAL DEVICES. You
should carefully read this manual before using this medical device.
DESCRIPTION
The stretcher is intended for hospital places and is designed for simple patient transport in the ward.
The stretcher is available in two versions, one xed and the other with the removable top without
wheels, complete with lower trolley for transport.
27800 – COMPONENTS
1Stretcher base with padding
2Headboard and footboard handles inserted in the base
3N. 1 Front leg structure with Ø 100 castor wheels with brake
4N. 1 Back leg structure with Ø100 castor wheels without brake
5Cross tubes for connecting the legs
6Tube for backrest
7Accessories on request: couple side rails, oxygen bottle holder and basket

8
ENGLISH
27801 – COMPONENTS
removable strechter transport trolley
1Stretcher base with padding
2Headboard and footboard handles inserted in the base
3N. 2 leg structure without wheels (stretcher)
4N. 2 curved leg structures with Ø100 castor wheels
5Cross tubes for connecting the legs (trolley)
6Tube for backrest
7Accessories on request: couple side rails, oxygen bottle holder and basket
Assembly material for 27800/27801 codes:
-N. 4 TBE 8 x 50 Screws + M8 Washers
-N. 1 TE 6 x 35 + N.1 Hexagon Nutso
-N. 1 Allen Key 5

9ENGLISH
ASSEMBLY INSTRUCTIONS:
Begin the assembly phase by setting up a stable horizontal work plan.
Be careful to insert the legs with wheels tted with brakes on the side of the feet and consequently the
legs with the wheels without brake on the backrest side.
LOOSEN THE SCREWS FROM THE STRUCTURE ATTACHED TO THE PADDING.
27800: Take the legs equipped with castors with brakes (3) and insert them into the structure on the
side of the feet.
27801: Take the legs equipped without castors (3) and insert them into the structure from the side you
prefer (the legs are the same).
27800 27801
(Attention! The unmarked screw is used
to adjust the protrusion of the handle, see
instructions in the last line)
Insert the legs and screw it back in.
REPEAT THE SAME OPERATION FROM THE OPPOSITE SIDE.
27800: Loosen the screws, insert the legs with wheels without brakes (4) and insert into the structure
from the side of the backrest.
27800: Loosen the screws, insert the legs without castors (3) and insert into the structure from the
opposite side to the previous one.
27800/27801: Take the rod of the backrest (6), insert in the appropriate seat and x it through the
hexagonal screw and bolt supplied.

10
ENGLISH
27800: Take the two cross tubes (5) and x them to the legs through TBE screws and the relative
washers supplied.
27801: Take the two cross tubes (5) and x them to the curved legs of trolley (4) with castors through
TBE screws and the relative washers supplied.
27800 27801
The handle must be adjusted in both models.
Loosen the screws and pull the handle (2) so as to allow the inserition of the hands to push the
stretcher. Tighten the screws once the desired position has been found.
Warning! ASCENT AND DESCENT ONLY PERMITTED WITH WHEELS LOCKED.
TECHNICAL DATA
27800 27801
Measurement
• Cm 181 x 55 x 79 h
• Backrest adjustment
from 0° to max. 55°
• Box 198 x 17 x 64 cm
• Cm 181 x 55 x 80 h.
• Removable top only cm 51 h
(cm 47 h frame, mattress excluded)
• Trolley only cm 53.5 h
• Backrest adjustment from 0° to max. 55°
• Box 198 x 17 x 64 cm
Weight 32 kg (35 kg with box) 36 kg (39 kg with box)
Max Load 110 kg 110 kg