Goldmedal 2703-00-000 User manual

© 2023 Gold Medal Products Co.
Part No. 110028
Instruction Manual
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
Cheddar Easy
All-In-One Cheese Corn Shop
Model No. 2703-00-000

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 2
gmpopcorn.com
SAFETY PRECAUTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle. Keep cord and plug off the ground and away
from moisture. Always unplug the equipment before cleaning or servicing.
DO NOT immerse any part of this equipment in water.
DO NOT use a water jet or excessive water when cleaning. 008_012221
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
014_020416
WARNING
To avoid burns, DO NOT touch heated surfaces.
DO NOT place or leave objects in contact with heated surfaces.
009_092414
WARNING
ALWAYS wear safety glasses when servicing this equipment.
010_010914
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
WARNING
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862
022_060215

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 3
gmpopcorn.com
WARNING
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefully read all instructions before operation.
012_010914
WARNING
This machine is NOT to be operated by minors.
007_010914
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614
Note: Improvements are always being made to Gold Medal’s equipment. This information
may not be the latest available for your purposes. It is critical that you call Gold Medal’s
Technical Service Department at 1-800-543-0862 for any questions about your
machine operations, replacement parts, or any service questions. (Gold Medal
Products Co. does not assume any liability for injury due to careless handling and/or
reckless operation of this equipment.) General images may be used in manual for
reference only.

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 4
gmpopcorn.com
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold
Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Model Description
2703-00-000:Cheddar Easy All-In-One Cheese Corn Shop, 8 gallon capacity.
Items Included with this Unit
Setup
1. Remove all packaging and tape prior to operation.
2. Place unit on a sturdy, level base for use.
3. With the machine OFF and unplugged, install the heat lamp (reference image shown).
4. Place Blending Pot on rollers for use.
5. After setup, the unit should be cleaned prior to use (see Care and Cleaning section).
Blade Scraper
(PN 111244)
4 Cup Glass Beaker
(Cheese Measure)
(PN 111355)
Heat Lamp Bulb
(PN 47139)
Heat Lamp shown installed in unit.
Rear View

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 5
gmpopcorn.com
Electrical Requirements
The following power supply must be provided (reference unit Data Plate for Wattage requirement):
120 V~, 60 Hz
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle. Keep cord and plug off the ground and away
from moisture. Always unplug the equipment before cleaning or servicing.
DO NOT immerse any part of this equipment in water.
DO NOT use a water jet or excessive water when cleaning. 008_012221
A certified electrician must furnish sufficient power for proper machine operation and install any
supplied receptacle (reference unit Data Plate for model specific Volts AC, Hertz, and Wattage
requirements). We recommend this equipment be on a dedicated and protected circuit. Failure
to wire properly will void the warranty and may result in damage to the machine. It is Gold Medal
Products Co.’s recommendation that this machine be plugged directly into a wall outlet. The use of
extension cords is not recommended due to safety concerns, and may cause sacrificed and/or
reduced performance. Make sure cord is located to prevent a trip hazard or unit upset.
Before You Plug In Machine
1. Make sure all machine switches are OFF before plugging equipment into receptacle.
2. Make sure wall outlet can accept the grounded plugs (where applicable) on the power
supply cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable).
5. Install unit in a level position.
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 6
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
TUMBLER SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the tumbler drive motor.
With this switch in the ON position, the blending pot will continually roll.
TUMBLER HEAT SWITCH
Two position, ON/OFF lighted rocker switch - turns the Heat Lamp ON/OFF.
WARMING PLATE HEAT CONTROL
Graduated dial from LO to HIGH which controls the warming plate heat.
INDICATOR LIGHT
When lit, this light indicates the warming plate is ON.
Warming Plate
Heat Control
Tumbler Switch
Tumbler
Heat Switch
Indicator Light

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 7
gmpopcorn.com
Operating Instructions
1. Place the Blending Pot on all the rollers securely (the Blending Pot has an 8 gallon
capacity).
2. Fill the Cheese Measure with 3 cups of Gold Medal Products Co. Cheddar Pure Gold
(Item No. 2327) and place on the warming plate.
3. Set the Warming Plate Heat Control on HIGH for approximately 20 minutes to warm
the cheese. Stir occasionally for even heating, then reduce the temperature to prevent
overheating.
CAUTION: Cheese Measure will be hot; DO NOT touch it with your hands. Use oven
mitt or similar protective device when handling Cheese Measure.
The warming plate should be turned OFF when not in use.
4. Add product to be mixed to the Blending Pot.
5. Turn the Tumbler Switch ON and begin tumbling the product.
6. Turn the Tumbler Heat Switch ON to keep the product warm while tumbling.
7. For cheese corn, begin adding cheese mixture until the corn is coated as desired.
8. Turn the Tumbler Switch OFF.
9. Remove the Blending Pot and empty the contents.
10. Repeat the process for additional product.

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 8
gmpopcorn.com
Care and Cleaning
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water. DO NOT clean appliance with a water jet or steam
cleaner. Always unplug the equipment before cleaning or servicing. 025_051321
WARNING
To avoid burns, DO NOT touch heated surfaces.
DO NOT place or leave objects in contact with heated surfaces.
009_092414
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only
use non-toxic, food grade cleaners).
For surfaces needing further cleaning or degreasing, Watchdog Stainless Cleaner (Item No. 2088)
or Watchdog Concession Equipment Degreaser (Item No. 2580) is available for use accordingly.
For any cleaning products used, follow the manufacturer’s instructions on the product. DO NOT
use oven cleaners or abrasive materials as they will damage parts of machine.
Follow the directions below to clean the unit each day after use.
1. Turn machine OFF, unplug unit and allow it to cool before attempting to clean.
2. Remove all pans/accessories and take them to the sink to clean with soap and water,
then rinse and dry.
3. Clean unit with a soft cloth, slightly dampened with soap and hot water, then wipe
again to remove any remaining cleaner.

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 9
gmpopcorn.com
THE FOLLOWING SECTIONS ARE FOR QUALIFIED SERVICE PERSONNEL ONLY
MAINTENANCE INSTRUCTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle. Keep cord and plug off the ground and away
from moisture. Always unplug the equipment before cleaning or servicing.
DO NOT immerse any part of this equipment in water.
DO NOT use a water jet or excessive water when cleaning. 008_012221
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
014_020416
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
CAUTION
THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY
FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH
ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE
OPERATOR.
027_010914

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 10
gmpopcorn.com
ORDERING SPARE PARTS
1. Identify the needed part by checking it against the photos, illustrations, and/or
parts list. (General images may be used in manual for reference only.)
2. Use only approved replacement parts when servicing this unit.
3. When ordering, please include part number, part name, and quantity needed.
4. Please include your model number, serial number, and date of manufacture (located
on the machine nameplate/data plate) with your order.
5. Address all parts orders to Parts Department, Gold Medal Products Co., 10700
Medallion Drive, Cincinnati, Ohio 45241-4807
or place orders by phone or online:
Phone: [phone]
[phone]
Fax: [phone]
[phone]
E-mail: [email protected]
Web Page: gmpopcorn.com

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 11
gmpopcorn.com
Cabinet Exterior Front and Controls View
Item
Part Description
Part Number
2703-00-000
1
BLENDING POT WELDMENT
17491
2
LIGHT SHIELD
111276
3
CUP SUPPORT
114049
4
TEFLON RING
111281
5
HOT PLATE 450W
111205
6*
M4 HEX NUT (fastener for hot plate)
111207
7
TUMBLER LABEL
111209
8
SWITCH, LIGHTED ROCKER GR
42798
9
CONTROL KNOB
38389
10
HEAT CONTROL
87297
11
8-32 X 1/4 PHIL PAN M/S
87314
12
PILOT LIGHT, GREEN
48660
13
DIODE ASSEMBLY
111283
8
7
9
12
*Remove Cover Plate on bottom of unit
for access to Hot Plate fastener.
1
2
5, 6*
4
10
11
Diode Assembly (includes Diode
and Wiring shown) reference
Wiring Diagram for placement.
13
For Labels, see Safety
Labels section.
Data Plate
3

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 12
gmpopcorn.com
Cabinet Rear and Bottom View –Parts Breakdown
14
15*
13
12
11
3
See Motor and Drive/Idler
Wheels Section for parts
breakdown.
1
2
5
Unit Exterior - Bottom View
16, 17, 18
6
7
Bulb goes into
Light Shield Conical
4
*CAUTION: If supply cord is damaged, it
must be replaced by Gold Medal
Products Co., its service agent, or
similarly qualified persons in order
to avoid a hazard.
1
19
2703-00-000
9
10
8
9a

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 13
gmpopcorn.com
Cabinet Rear and Bottom View –Parts List
Item
Part Description
Part Number
2703-00-000
1
SCREW #8-32X3/8 PAN HD PH
74141
2
COVER PLATE
111203
3
HEAT LAMP 250W, 115/125V
47139
4
LIGHT SHIELD
111276
5
10-24 X 3/8 PAN HD PH T23
38111
6
LIGHT SHIELD, CONICAL
53077
7
LAMP HOLDER
47047
8
CAP
17784
9
3/8 X 1-1/2 SHOULDER BOLT
111208
9a
3/8IN FLAT WASHER, ZINC
111231
10
ACORN NUT 5/16-18
77610
11
NYLON WHEEL
17504
12
IDLER BRACKET
111240
13
1/4-20 X 1/2 P/H PHIL
12471
14
STRAIN RELIEF#SR-6N-4
87810
15*
15 AMP PLUG LEAD –IN CORD
22038
16
RUBBER FEET 3/4IN HIGH
47155
17
8-32 X 1 PH PAN M/S S.S.
12219
18
8-32 SERRATED FLANGE NUT
61151
19
COVER (bottom cover for access to controls
interior)
111479

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 14
gmpopcorn.com
Motor and Drive/Idler Wheels
Item
Part Description
Part Number
2703-00-000
1
IDLER WHEEL
17506
2
CAP
111230
3
1/2"X1-1/2" SHOULDER BOLT
111210
4
3/8" FLAT WASHER, ZINC
111231
5
3/8-16 NYLON LOCKNUT
114032
6
1/4-20X3/4 LG HEX HD BOLT
13164
7
1/4 FLAT WASHER ST. STL
42989
8
HEX NUT 1/4-20 ESLOK
42361
9
BUSHING, SNAP .500 IN
47236
10
MOTOR MOUNT BRACKET
111200
11
DRIVE MOTOR
17651
12
10-32 X 1 UNSL NON-IND
49376
13
DRIVE WHEEL (Set Screw sold separately)
111202
14
SET SCREW, 10-32 X 3/8 (for Drive Wheel)
41994
General image shown for
parts reference only.
1
6, 7, 8
9
10
11
12
13, 14
2
3
4
5
2703-00-000

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 15
gmpopcorn.com
Safety Labels
Item
Part Description
Part Number
2703-00-000
1
TUMBLER LABEL
111209
2
BURN HAZARD LABEL
111282
3
WARNING, MAX LAMP 250W
54010
4
WARNING LABEL CORD
68720
Accessories
Item
Part Description
Part Number
2703-00-000
1
4 CUP GLASS BEAKER W/HAND
111355
2
9-1/2" FLAT BLADE SCRAPER
111244
1
Unit Labels
Power Cord Label
4
3
2
1
2

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 16
gmpopcorn.com
Wiring Diagram
Model No. 2703-00-000

Cheddar Easy All-In-One
Cheese Corn Shop Model No. 2703-00-000
Page 17
gmpopcorn.com
WARRANTY
© 2023 –The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of
Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website
display, without its express written consent.
WARRANTY
Gold Medal Products Co. warrants to the original purchaser each item of its manufacture to be free
of defects in workmanship and material under normal use and service. Gold Medal Products Co.’s
obligation under this warranty is limited solely to repairing or replacing parts, f.o.b. Cincinnati,
Ohio, which in its judgment are defective in workmanship or material and which are returned,
freight prepaid, to its Cincinnati, Ohio factory or other designated point. Except for “Perishable
Parts” on specific machines, the above warranty applies for a period of two (2) years from the date
of original sale to the original purchaser of equipment when recommended operating instructions
and maintenance procedures have been followed. These are packed with the machine. Parts
warranty is two (2) years, labor is six (6) months.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED,
AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART, INCLUDING THE
IMPLIED WARRANTY OF MERCHANTABILITY. THERE ARE NO WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THIS WARRANTY
DOES NOT APPLY TO THE EQUIPMENT AND SERVICES RELATED TO THE NAYAX
CASHLESS PAYMENT SYSTEM AND GOLD MEDAL EXPRESSLY DISCLAIMS ANY
AND ALL WARRANTIES RELATED TO THE SAME. In no event shall Gold Medal Products Co.
be liable for special, incidental or consequential damages. No claim under this warranty will be
honored if the equipment covered has been misused, neglected, damaged in transit, or has been
tampered with or changed in any way. No claim under this warranty shall be honored in the event
that components in the unit at the time of the claim were not supplied or approved by Gold Medal
Products Co. This warranty is effective only when electrical items have been properly attached to
city utility lines only at proper voltages. This warranty is not transferable without the written
consent of Gold Medal Products Co.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that person, firm,
association, or corporation who was billed by the GOLD MEDAL PRODUCTS CO., or their
authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL PURCHASER
FIRST CALLS GOLD MEDAL PRODUCTS CO. AT 1-800-543-0862 TO DISCUSS WITH OUR
SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM, AND, IF NECESSARY, FOR
INSTRUCTIONS CONCERNING THE REPAIR OR REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
gmpopcorn.com
Phone: [phone] Fax: [phone]
[phone] [phone]