Goldmedal DESIGNER Series User manual

Part No. 74312
DESIGNER SERIES
NACHO CABINETS
Instruction Manual
Model #5513

Nacho Cabinets
All Models #5513
2
SAFETY PRECAUTIONS

Nacho Cabinets
All Models #5513
3
FORWARD
This manual covers the model #5513 nacho display cabinet. You can be very proud of your 5513 Designer
Series Nacho Cabinet. In addition to being an attractive "eye catcher", it contains various engineering
innovations which make it the leader in the industry. The exterior of the machine is designed and built-up to
present an attractive appearance for many years.
INSTALLATION
CHECKING SHIPMENT
Unpack the shipping crate and check thoroughly for any damage which may have occurred in transit. Any
claims should be filed immediately with the transportation company.
ELECTRICAL REQUIREMENTS
Voltage for your warmer is 120 Volt, 60 Cycle. The Holding Cabinets will draw 1350 Watts. Your electrician
must furnish sufficient current for the proper operation of your machine. The switches and controls which
operate the display are located on the top right side of the machine.

Nacho Cabinets
All Models #5513
4
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
LIGHT SWITCH
Flipping this switch to the "ON" position energizes the light.
HEAT SWITCH
Flipping this switch to the "ON" position energizes the heat element.
Note: The is heat element is controlled by the variable bulb cap thermostat on the side of the cabinet.
ADJUSTABLE HEAT CONTROL
The machine comes with a set VARIABLE bulb cap thermostat for product temperatures of 80 to 150
degrees F.
EASY STEPS FOR USING UNIT
1. Turn light switch to on position
2. Turn heat switch to on position.
3. Adjust heat control to desired temperature
CARE AND CLEANING
The aluminum body of the display is easy to keep clean. Usually a damp cloth will remove all dirt and
grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should always be clean
and sparkling. Remember the inside of the glass must be cleaned too.

Nacho Cabinets
All Models #5513
5
MAINTENANCE INSTRUCTIONS

Nacho Cabinets
All Models #5513
6
ORDERING SPARE PARTS
1. Identify the needed part by checking it against the photos, illustrations, and/or the parts list.
2. When ordering, please include part number, part name, and quantity needed.
3. Please include your model name, serial number, and date of manufacture (located on the machine
nameplate) with your order.
4. Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
[phone]
Fax: [phone]
E-mail: [e-mail]
Web Page: www.gmpopcorn.com

Nacho Cabinets
All Models #5513
7
PARTS LIST
Model #
5513
Item No Part No Description
1 74264 Heat Element 600 Watt
2 79108 Heat Element 50 Watt Foil
3 42798 Rocker On/Off Switch
4 40721 Axial Fan
5 47199 Blower Plug and Cord
6 41020 Light Tube Holder
7 41021 Light Tube Holder W/ Starter
8 41022 Ballast
9 75026 Light Starter
10 39016 Light Tube
11 74289 Light Shield
12 74311 Baffle
13 74211 Access Cover
14 74292 Top Plate Weldment
15 74287 Doors
16 74288 Shelf
17 74220 Hammer Head Screws
18 42617 Variable heat control
19 74280 Base Rail (Short)
74298 Base Rail (Long)
20 74281 Corner Post
21 74292 Top Rail ( Short )
74299 Top Rail ( Long )
22 74283 Verticle Door Track
23 74301 Upper Door Track
24 74285 Upper Rail ( Short )
74300 Upper Rail ( Long )
25 74302 Horizontal Door Track
26 74207 End Connectors
27 74286 Groove Filler Long
28 74270 Groove Filler Short
29 74284 Side Plate
30 74303 Control Side Plate
31 74244 Switch Plate ( on/off switches)
32 74294 Back Plate
33 74296 Sign Plate
34 74305 Sign
35 74306 Side Glass
36 74304 Front Glass
37 74290 Base Plate Weldment
38 74266 Wrench

Nacho Cabinets
All Models #5513
8
WIRING DIAGRAM FOR MODEL 5513
ELECTRICAL SCHEMATIC
CABINET WIRING IS #18 AWG CSA LISTED, 600VOLT – 105C U.L. RECOGNIZED.

Nacho Cabinets
All Models #5513
9
© 2013 – The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of
Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website
display, without its express written consent.
WARRANTY
Gold Medal Products Co. warrants to the original purchaser each item of its manufacture to
be free of defects in workmanship and material under normal use and service. Gold Medal
Products Co.’s obligation under this warranty is limited solely to repairing or replacing parts,
f.o.b. Cincinnati, Ohio, which in its judgment are defective in workmanship or material and
which are returned, freight prepaid, to its Cincinnati, Ohio factory or other designated point.
Except for “Perishable Parts” on specific machines, the above warranty applies for a period
of two (2) years from the date of original sale to the original purchaser of equipment when
recommended operating instructions and maintenance procedures have been followed. These
are packed with the machine. Parts warranty is two (2) years, labor is six (6) months.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. THERE ARE
NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF. In no event shall Gold Medal Products Co. be liable for special, incidental or
consequential damages. No claim under this warranty will be honored if the equipment covered
has been misused, neglected, damaged in transit, or has been tampered with or changed in any
way. No claim under this warranty shall be honored in the event that components in the unit at
the time of the claim were not supplied or approved by Gold Medal Products Co. This warranty
is effective only when electrical items have been properly attached to city utility lines only at
proper voltages. This warranty is not transferable without the written consent of Gold Medal
Products Co.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that person,
firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS CO.,
or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS CO. AT 1-800-543-0862 TO
DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM,
AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR
REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
10700 Medallion Drive, Cincinnati, Ohio 45241
-
4807 USA
gmpopcorn.com
Phone:
(800) 543
-
0862
Fax:
(800) 542
-
1496
[phone] [phone]