Goldmedal 5587-00-195 User manual

© 2021 Gold Medal Products Co.
Part No. 110300
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
Portion Pak Cheese Warmer
Model No. 5587-00-195 and 5587-01-190
Instruction Manual

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 2
gmpopcorn.com
Table of Contents
SAFETY PRECAUTIONS ...................................................................................................................................3
INSTALLATION INSTRUCTIONS ...................................................................................................................5
Inspection of Shipment .......................................................................................................................................5
Manual.......................................................................................................................................................................5
Model Description.................................................................................................................................................5
Items Included with this Unit ...........................................................................................................................5
Setup...........................................................................................................................................................................5
Electrical Requirements .....................................................................................................................................7
Before You Plug In Machine ..............................................................................................................................7
OPERATING INSTRUCTIONS .........................................................................................................................8
Controls and Their Functions...........................................................................................................................8
Operating Instructions ........................................................................................................................................8
Care and Cleaning .......................................................................................................................................9
THE FOLLOWING SECTIONS ARE FOR QUALIFIED SERVICE PERSONNEL ONLY ............10
MAINTENANCE INSTRUCTIONS ................................................................................................................ 10
ORDERING SPARE PARTS............................................................................................................................ 11
Replacing Broken Glass....................................................................................................................................11
Cabinet Exterior –Front View.......................................................................................................................12
Cabinet Interior and Bottom View...............................................................................................................13
Motor Plate Components.................................................................................................................................14
Sign and Lighting Components .....................................................................................................................15
Safety Labels.........................................................................................................................................................15
Wiring Diagram ........................................................................................................................................16
WARRANTY...................................................................................................................................................... 18

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 3
gmpopcorn.com
SAFETY PRECAUTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle. Keep cord and plug off the ground and away
from moisture. Always unplug the equipment before cleaning or servicing.
DO NOT immerse any part of this equipment in water.
DO NOT use a water jet or excessive water when cleaning. 008_012221
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
014_020416
WARNING
To avoid burns, DO NOT touch heated surfaces.
DO NOT place or leave objects in contact with heated surfaces.
009_092414
WARNING
ALWAYS wear safety glasses when servicing this equipment.
010_010914
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
WARNING
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862
022_060215

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 4
gmpopcorn.com
WARNING
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefully read all instructions before operation.
012_010914
WARNING
This machine is NOT to be operated by minors.
007_010914
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
DO NOT install equipment in an area where a water jet is used.
Unit to be installed in locations where ambient temperatures are between a minimum of
5°C (41°F) and a maximum of 55°C (131°F).
Unit to be installed in locations where it can be overseen by trained personnel.
Install unit on a level surface.
Unit is a Portion Pak Cheese Warmer.
Note: Improvements are always being made to Gold Medal’s equipment. This information
may not be the latest available for your purposes. It is critical that you call Gold Medal’s
Technical Service Department at 1-800-543-0862 for any questions about your
machine operations, replacement parts, or any service questions. (Gold Medal
Products Co. does not assume any liability for injury due to careless handling and/or
reckless operation of this equipment.) General images may be used in manual for
reference only.

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 5
gmpopcorn.com
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold
Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Model Description
Countertop warmer with three removable shelves, a lighted cabinet and sign, and a
heater/blower in dome. This unit is designed for Portion Pak Cheese Containers, not acceptable
for open volatile food products.
Items Included with this Unit
Setup
1. Remove all packaging and tape prior to operation.
2. Place the unit on a sturdy, level base.
3. Door knob is shipped in accessories pack. Install knob, using the tee bolt, on door (see
image below).
4. Unit has 4 glide feet preinstalled at the factory (see image below). Install a Black
Crutch Tip on each foot. Firmly push crutch tip over glide until it covers glide entirely.
5. Unpack the racks, then place them on the rack holders in the unit as shown below.
6. After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Instruction
Manual
Registration
Warranty Card
Black Crutch Tip
(PN 49123) (X4)
Rack Shelf
(PN 17012) (x3)
Door Knob (PN 47120)
Tee Bolt (PN 75267)

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 6
gmpopcorn.com
Black Crutch Tip
Glide (pre-installed
at the factory)
General images shown for reference only.
Install Knob with
Tee Bolt on door.
Shelf supports
located on each
corner post.

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 7
gmpopcorn.com
Electrical Requirements
The following power supply must be provided (reference unit Data Plate for Wattage requirement):
5587-00-195: 120 V~, 60 Hz
5587-01-190: 220-230 V~, 50/60 Hz
Potential Electrical Variations: 220 V~, 60 Hz
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle. Keep cord and plug off the ground and away
from moisture. Always unplug the equipment before cleaning or servicing.
DO NOT immerse any part of this equipment in water.
DO NOT use a water jet or excessive water when cleaning. 008_012221
A certified electrician must furnish sufficient power for proper machine operation and install any
supplied receptacle (reference unit Data Plate for model specific Volts AC, Hertz, and Wattage
requirements). We recommend this equipment be on a dedicated and protected circuit. Failure
to wire properly will void the warranty and may result in damage to the machine. It is Gold Medal
Products Co.’s recommendation that this machine be plugged directly into a wall outlet. The use of
extension cords is not recommended due to safety concerns, and may cause sacrificed and/or
reduced performance. Make sure cord is located to prevent a trip hazard or unit upset.
Before You Plug In Machine
1. Make sure all machine switches are OFF before plugging equipment into receptacle.
2. Make sure wall outlet can accept the grounded plugs (where applicable) on the power
supply cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable).
5. Install unit in a level position.
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 8
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
POWER SWITCH
ON/OFF lighted rocker switch - provides power to the lighting and heat element. The
green light ON indicates power to unit.
Operating Instructions
1. Turn Power Switch ON.
2. Pre-heat unit 10-15 minutes while empty.
3. Place the Portion Pak Cheese Containers inside cabinet and allow them to preheat for
approximately one hour—do not overfill the unit or block the air vents. Allow air to
circulate freely.
Unit designed for prepackaged food products only. Not acceptable for open volatile
food products.
4. Keep door closed if not serving or refilling the unit.
General image shown for reference only.
Power Switch

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 9
gmpopcorn.com
Care and Cleaning
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water. DO NOT clean appliance with a water jet or steam
cleaner. Always unplug the equipment before cleaning or servicing. 025_051321
WARNING
To avoid burns, DO NOT touch heated surfaces.
DO NOT place or leave objects in contact with heated surfaces.
009_092414
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only
use non-toxic, food grade cleaners).
For surfaces needing further cleaning or degreasing, Watchdog Stainless Cleaner (Item No. 2088)
or Watchdog Concession Equipment Degreaser (Item No. 2580) is available for use accordingly.
For any cleaning products used, follow the manufacturer’s instructions on the product. DO NOT
use oven cleaners or abrasive materials as they will damage parts of machine.
Follow the directions below to clean the unit.
1. Turn machine OFF, unplug unit and allow it to cool completely.
2. Take racks/pans to the sink to clean with soap and water, then rinse and dry.
3. Wipe interior and exterior surfaces clean using a SLIGHTLY damp cloth (cloth may be
SLIGHTLY dampened with soap and water, then wipe again to remove any remaining
cleaner).
4. Clean glass panels with glass cleaner. Gold Medal Watchdog Glass Cleaner (Item No.
2588) is recommended.
Ammonia cleaners will damage plastic doors/panels. Only use a non-ammonia cleaner,
such as Gold Medal Watchdog Glass Cleaner (Item No. 2588).

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 10
gmpopcorn.com
THE FOLLOWING SECTIONS ARE FOR QUALIFIED SERVICE PERSONNEL ONLY
MAINTENANCE INSTRUCTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle. Keep cord and plug off the ground and away
from moisture. Always unplug the equipment before cleaning or servicing.
DO NOT immerse any part of this equipment in water.
DO NOT use a water jet or excessive water when cleaning. 008_012221
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
014_020416
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
CAUTION
THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY
FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH
ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE
OPERATOR.
027_010914

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 11
gmpopcorn.com
ORDERING SPARE PARTS
1. Identify the needed part by checking it against the photos, illustrations, and/or
parts list. (General images may be used in manual for reference only.)
2. Use only approved replacement parts when servicing this unit.
3. When ordering, please include part number, part name, and quantity needed.
4. Please include your model number, serial number, and date of manufacture (located
on the machine nameplate/data plate) with your order.
5. Address all parts orders to Parts Department, Gold Medal Products Co., 10700
Medallion Drive, Cincinnati, Ohio 45241-4807
or place orders by phone or online:
Phone: [phone]
[phone]
Fax: [phone]
[phone]
E-mail: [email protected]
Web Page: gmpopcorn.com
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS (Height x Width x Thickness)
Front Glass: 16 1/2” x 10 59/64” x 1/8
Side Glass: 16 1/2” x 13 5/8” x 1/8 (2 pieces per unit)
1. Turn machine OFF, unplug unit and allow it to cool before attempting to replace glass.
2. Remove all loose pieces of glass.
3. Place a bungee (or large rubber band) around the unit to help hold the corner posts in
place, then remove dome and sign.
4. Remove all rigid glass channels from around glass to be replaced, set channels aside
for reuse.
Note: The rigid channels may be wedged in the corner posts or top and bottom glass
extrusions, and must be removed before new glass can be installed.
5. Carefully remove the rest of the broken glass.
6. Apply decals (if desired) to new glass panel.
7. Slide rigid glass channels over exposed sides and bottom of new glass panel.
8. Lift motor plate (ceiling plate) out of the way to allow the new glass panel to slide into
the corner posts and down into the bottom glass extrusion.
9. Make sure the rack holders are still in place, then carefully lower the motor plate until
the top glass extrusion secures glass in place.
10. Reinstall dome and sign, then remove bungee.

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 12
gmpopcorn.com
Cabinet Exterior –Front View
Item
Part Description
Part Number
All Models
1
DOOR (1 door panel)
74714
2
RIGID CHANNEL, SIDE
74706
3
RIGID CHANNEL, FRONT
74707
4
8-32 X 3/8 PH PAN W/SEMS
42227
5
ACORN NUT #8-32
47702
6
FEMALE HINGE RIGHT HAND
61373
7
MALE HINGE SHORT RIGHT
41350
8
8-32 X 3/8 SLT. HWH M/S
49594
9
GLASS CHAN 16 1/8 (used on side edges of glass)
49845
10
GLASS CHAN 13 5/8 (used on bottom edge of side glass)
74717
11
GLASS CHAN 10 7/8 (used on bottom edge of front glass)
74719
12
ROCKER SWITCH DPST
42532
13
BOTTOM COVER
74724
14
MAGNETIC CATCH
47561
15
KNOB LID LIFT
47120
16
TEE BOLT #8-32X3/8 ZP
75267
17
10-24 X 3/4 HEX HEAD SCREW
41314
18
GLIDE
47328
19
CRUTCH TIP
49123
17
18
19
9
For Glass Panels,
see Replacing
Glass section.
10, 11
5587
See Sign and Lighting
Components section.
General images shown for parts reference only.
6
7
4
5
8
B
See Corner Post
Table below.
A
See Corner Post
Table below.
C
See Corner Post
Table below.
Corner Post Table
Item
Description
190 Series
A
CORNER POST ALT SHELF
115590
B
LR CNR POST ALT SHELF
115591
C
RR CNR POST ALT SHELF
115589
1
12
15, 16
14
2
3
13

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 13
gmpopcorn.com
Cabinet Interior and Bottom View
Item
Part Description
Part Number
5587-00-195
5587-01-190
1
8-32 X 1/4 SLT. HWH M/S
49060
49060
2
SHELF BRACKET, SHT METAL
120302
120302
3
SHELF (racks)
17012
17012
4
DRIP PAN WELDMENT
17011
17011
5
THERMOSTAT 145F BULB
87996
87996
6
SENSOR BRACKET
40838
40838
7
3 INCH FAN GRATE
74746
74746
8
LIGHT COVER
74708
74708
9
10-24 X ¾ HEX HEAD SCREW
41314
41314
10
GLIDE
47328
47328
11
CRUTCH TIP
49123
49123
12
BOTTOM COVER
74724
74724
13
STRAIN RELIEF SR-11-2 RA
87194
87194
14*
POWER SUPPLY CORD 15 AMP
22038
POWER SUPPLY CORD, EXPORT
42369
5587
*CAUTION: If supply cord is damaged, it
must be replaced by a special cord or
assembly available from Gold Medal
Products Co. or its service agent.
General images shown for parts reference only.
7
8
5
6
13
14*
Bottom View
9, 10, 11
12
1
2
3
4

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 14
gmpopcorn.com
Motor Plate Components
Item
Part Description
Part Number
5587-00-195
5587-01-190
1
3 INCH PABST FAN
74741
74742
2
ANGLED BLOWER WRAPPER
74740
74740
3
THERMOSTAT 145F BULB
87996
87996
4
THERMOSTAT BRACKET
74667
74667
5
BALLAST
74725
55360
6
BLOWER BOX
74710
74710
7
HEAT ELEMENT 475W
74720
74720EX
8
THERMOSTAT, 260F
74748
74748
6
7
1
2
3
4
Blower Assembly
(Interior View)
8
See Lighting
Components
section.
5
General images shown for parts reference only.

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 15
gmpopcorn.com
Sign and Lighting Components
Item
Part Description
Part Number
5587-00-195
5587-01-190
1
SIGN FRAME ANGLE
74709
74709
2
SIGN PANEL, NACHO
74721
74721
3
SIGN COVER
74963
74963
4
SOCKET, DOUBLE TUBE
74726
LIGHT BASE
16972
5
LAMP, DOUBLE TUBE, 120V
74727
TWIN TUBE BULB
16973
6
LIGHT DEFLECTOR
74711
74711
Safety Labels
Item
Part Description
Part Number
1
LABEL, CAUTION HOT
38201
2
LABEL SAFE OPERATING INST
111931
3
LABEL, DO NOT CLEAN…
49393
4
WARNING LABEL CORD
68720
2
3
1
Power Cord Label
4
4
2, 3
5
6
1
To Replace Bulb:
Remove screws in
Sign Frame Angle,
then lift sign out to
access bulb.

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 16
gmpopcorn.com
Wiring Diagram
Model 5587-00-195

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 17
gmpopcorn.com
Model 5587-01-190

Portion Pak Cheese Warmer Model No. 5587-00-195 and 5587-01-190
Page 18
gmpopcorn.com
WARRANTY
© 2021 –The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of
Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website
display, without its express written consent.
WARRANTY
Gold Medal Products Co. warrants to the original purchaser each item of its manufacture to
be free of defects in workmanship and material under normal use and service. Gold Medal
Products Co.’s obligation under this warranty is limited solely to repairing or replacing parts,
f.o.b. Cincinnati, Ohio, which in its judgment are defective in workmanship or material and
which are returned, freight prepaid, to its Cincinnati, Ohio factory or other designated point.
Except for “Perishable Parts” on specific machines, the above warranty applies for a period
of two (2) years from the date of original sale to the original purchaser of equipment when
recommended operating instructions and maintenance procedures have been followed. These
are packed with the machine. Parts warranty is two (2) years, labor is six (6) months.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. THERE ARE
NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF. In no event shall Gold Medal Products Co. be liable for special, incidental or
consequential damages. No claim under this warranty will be honored if the equipment covered
has been misused, neglected, damaged in transit, or has been tampered with or changed in any
way. No claim under this warranty shall be honored in the event that components in the unit at
the time of the claim were not supplied or approved by Gold Medal Products Co. This warranty
is effective only when electrical items have been properly attached to city utility lines only at
proper voltages. This warranty is not transferable without the written consent of Gold Medal
Products Co.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that person,
firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS CO.,
or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS CO. AT 1-800-543-0862 TO
DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM,
AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR
REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
gmpopcorn.com
Phone: [phone] Fax: [phone]
[phone] [phone]