Goldmedal SunnyPop 2552-00-012 User manual

© 2019 Gold Medal Products Co. Part No. 110113
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
SunnyPop
TM
12 oz. Popper
Model No. 2552-00-012
Instruction Manual

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 2
gmpopcorn.com
Table of Contents
SAFETY PRECAUTIONS ............................................................................................................................. 3
INSTALLATION INSTRUCTIONS .............................................................................................................. 5
Inspection of Shipment ..............................................................................................................................................5
Manual ................................................................................................................................................................................5
Model Description ........................................................................................................................................................5
Items Included with this Unit..................................................................................................................................5
Setup ...................................................................................................................................................................................6
Electrical Requirements ............................................................................................................................................7
Before ou Plug In Machine .....................................................................................................................................7
OPERATING INSTRUCTIONS .................................................................................................................... 8
Controls and Their Functions .................................................................................................................................8
Popping Corn.......................................................................................................................................... 9
Care and Cleaning ............................................................................................................................... 0
Troubleshooting ................................................................................................................................. 3
AGITATOR SET COLLAR ADJUSTMENT............................................................................................... 4
MAINTENANCE INSTRUCTIONS ............................................................................................................ 5
ORDERING SPARE PARTS....................................................................................................................... 6
Replacing Broken Glass........................................................................................................................................... 17
12/14 oz. Kettle Assembly (58014) – Agitator Assembly View ............................................................ 18
12/14 oz. Kettle Assembly (58014) – Kettle Bottom View ................................................................... 19
Cabinet Exterior – Front View ............................................................................................................................. 20
Cabinet Exterior – Rear View ............................................................................................................................... 21
Door Hardware Kits – Individual Component Breakdown.................................................................... 22
Cabinet Interior – Controls View ........................................................................................................................ 23
Cabinet Bottom – Corn Pan Element View .................................................................................................... 24
Motor Plate Assembly .............................................................................................................................................. 25
Lighted Sign Assembly ............................................................................................................................................ 26
Safety Labels................................................................................................................................................................. 27
Accessories.................................................................................................................................................................... 27
Wiring Diagram ................................................................................................................................... 28
WARRANTY................................................................................................................................................ 29

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 3
gmpopcorn.com
SAFETY PRECAUTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
008_051514
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
014_020416
WARNING
To avoid burns, DO NOT touch the kettle or any heated surface.
DO NOT place or leave objects in contact with heated surfaces.
013_092414
WARNING
ALWAYS wear safety glasses when servicing this equipment.
010_010914
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
WARNING
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862
022_060215

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 4
gmpopcorn.com
WARNING
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefully read all instructions before operation.
012_010914
WARNING
This machine is NOT to be operated by minors.
007_010914
Note: Improvements are always being made to Gold Medal’s equipment. This information
may not be the latest available for your purposes. It is critical that you call Gold Medal’s
Technical Service Department at 1-800-543-0862 for any questions about your
machine operations, replacement parts, or any service questions. (Gold Medal
Products Co. does not assume any liability for injury due to careless handling and/or
reckless operation of this equipment.) General images may be used in manual for
reference only.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 5
gmpopcorn.com
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold
Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Model Description
2552-00-0 2: 12 oz. Popper with a SunnyPop LED lighted sign and equipped with a
PowerOff
TM
Control feature.
Items Included with this Unit
Flavacol Measure
4.7 cc (PN 47679)
2 oz. Corn Measure
(PN 47148)
(x4) Black Crutch Tips (PN 49123)
(x2) Knob (PN 47120)
(x2) Tee Bolt
(PN 75267)
(for Popper Doors)
Knob
(PN 47120)
Screw (PN 42227
)
(for Old Maid Pan)
Oil Measure /2 Cup
(PN 47149)
Aluminum
Scoop
(PN 2071)

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 6
gmpopcorn.com
Setup
This unit has been tested at the factory.
1. Remove all packaging and tape prior to operation. Remove accessories and carefully
remove kettle packed in cabinet interior.
2. Place unit on a sturdy, level base.
3. The Popper blower vents out top of unit, allow adequate clearance for airflow.
4. Unit has 4 glide feet preinstalled at the factory (see image below). Install a Black
Crutch Tip on each foot. Firmly push crutch tip over glide until it covers glide entirely.
5. Tilt kettle and insert into hanger arms, then allow kettle to return naturally to an
upright position (see image below).
6. Plug kettle lead into receptacle located on ceiling of cabinet interior. Align keyed or
hook shaped prong with the correct opening, then push plug all the way in and twist
or rotate to lock in place. To unplug, untwist kettle plug before attempting to pull from
receptacle.
7. Door knobs are shipped in accessories pack. Install a door knob with tee bolt on each
popper door; install knob with screw on old maid pan.
8. After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Black Crutch Tip
Glide
(pre
-
installed
at the factory)
General images shown for reference only.
Kettle shown mounted
in hanger arms.
Kettle lead
shown plugged
into kettle
receptacle.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 7
gmpopcorn.com
Electrical Requirements
The following power supply must be provided (reference unit Data Plate for Wattage requirement):
20 V~, 60 Hz
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
008_051514
A certified electrician must furnish sufficient power for proper machine operation and install any
supplied receptacle (reference unit Data Plate for model specific Volts AC, Hertz, and Wattage
requirements). We recommend this equipment be on a dedicated and protected circuit. Failure
to wire properly will void the warranty and may result in damage to the machine. It is Gold Medal
Products Co.’s recommendation that this machine be plugged directly into a wall outlet. The use of
extension cords is not recommended due to safety concerns, and may cause sacrificed and/or
reduced performance. Make sure cord is located to prevent a trip hazard or unit upset. Units with
an IEC Power Cord - make sure the IEC cord is properly seated into the IEC receptacle before
powering up the machine.
Before You Plug In Machine
1. Make sure all machine switches are OFF before plugging equipment into receptacle.
2. Make sure wall outlet can accept the grounded plugs (where applicable) on the power
supply cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable).
5. Install unit in a level position.
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 8
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
KETTLE HEAT SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the heating elements in the
popping kettle. The green switch light ON indicates there is power to the kettle heating
element.
KETTLE MOTOR SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the kettle agitator motor
and exhaust blower. The Kettle Motor Switch MUST be ON at all times when there is
popcorn (popped or un-popped) in the kettle. The green switch light ON indicates there is
power to the agitator motor and exhaust blower.
LIGHTS/WARMER SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the popcorn sign, interior
cabinet light, and heat element for the corn pan.
POWEROFF CONTROL
The PowerOff Control feature will automatically turn the kettle heat off after 15 minutes of idle
time (no popcorn popped). The PowerOff Control will prevent the heat element and thermostat
from cycling OFF-ON if the Kettle Heat Switch is left on. This feature saves electrical power and
extends the life of the kettle heating element and thermostat.
•When the Kettle Heat Switch is turned ON, and the kettle thermostat switches OFF,
the PowerOff Control’s 15 minute timer starts; the 15 minute timer resets each
time a batch of popcorn is popped.
•The small green neon light in the Kettle Heat Switch will blink OFF-ON to indicate
the kettle has been automatically turned OFF.
•To restart the kettle heating, cycle the Kettle Heat Switch OFF-ON.
Kettle Heat Switch
Kettle Motor Switch
Label used on units with the
PowerOff Control feature.
Lights/Warmer
Switch

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 9
gmpopcorn.com
Popping Corn
This section describes instructions for popping Standard (salted popcorn).
Amount of Popcorn and Oil
our new popper is equipped with a corn, salt, and oil measure. We recommend flavored and
colored coconut oil. Popcorn popped in coconut oil stays fresh longer and does not leave black
deposits in your kettle like other oils. Use only top quality, fresh popcorn from reputable suppliers.
Ingredient amounts for popping Standard Popcorn:
Kettle Size Popcorn Charge Oil Charge Flavacol (Salt)
12 oz.
12 oz. (355 ml)
4
oz. (
118
ml)
1
Tblsp. (
15
cc)
For best results use Mega-Pop® 12 oz. premeasured pouches (Item# 2839).
Popping Standard (Salted) Popcorn
1. Turn the Lights/Warmer, Kettle Heat and Kettle Motor Switches ON.
2. To determine when the kettle is ready to pop corn (about 4 minutes), test pop three
kernels of corn and one ounce (30 ml) of popping oil. When the kernels pop, the kettle
is ready for use.
3. Lift the kettle lid and load the Mega-Pop® premeasured popcorn and oil pouch into
kettle, or pour in the popcorn and Flavacol, then add oil in the premeasured amounts
specified above. Close lid.
4. When the corn has finished popping, gently dump the popcorn.
5. On the final kettle of corn, turn the Kettle Heat Switch OFF just as the lids are forced
open by the popping corn. This procedure saves electricity, since the kettle has plenty
of heat, and helps eliminate smoke/odor from any oil residue that remains after
popping has stopped.
6. When finished popping, make sure KETTLE HEAT and KETTLE MOTOR switches are
turned OFF.
NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING CORN!
If Auto Shut-OFF is enabled, unit will automatically shut kettle heat OFF after 15
minutes of idle time (no popcorn popped). To restart kettle heating, cycle the Heat
Switch OFF-ON.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 10
gmpopcorn.com
Care and Cleaning
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water. DO NOT clean appliance with a water jet.
Always unplug the equipment before cleaning or servicing.
025_111616
WARNING
To avoid serious burns, DO NOT touch the kettle while it is hot!
028_082715
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only
use non-toxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of
advertising your product.
For surfaces needing further cleaning or degreasing, Watchdog Stainless Cleaner (Item No. 2088)
or Watchdog Concession Equipment Degreaser (Item No. 2580) is available for use accordingly.
For any cleaning products used, follow the manufacturer’s instructions on the product. DO NOT
use oven cleaners or abrasive materials as they will damage parts of machine.
Note: It is extremely important to follow all cleaning procedures, otherwise parts
damage and equipment failure will result. The warranty does not cover parts that
are damaged due to improper cleaning.
Daily Kettle Cleaning Instructions
1. Turn the power switch OFF and unplug the unit.
CAUTION: A hot kettle will cause burns if you touch it. Allow kettle to cool at least 1
hour before attempting to clean. DO NOT use ice or water to cool down a hot
kettle! Severe kettle damage will result and steam burns may occur!
2. When cool, wipe outside of kettle clean using a clean, soft cloth and Gold Medal
Watchdog Stainless Cleaner (Item No. 2088). DO NOT use oven cleaners or abrasive
materials as they will damage the kettle.
3. Mix 2 tablespoons (29.6 ml) of Gold Medal’s Heat’n Kleen (Item No. 2095) in 1 gallon
(3.8 L) of water.
4. Only pour enough of the Heat’n Kleen pre-mixed solution into the kettle to fill it 1/2 inch
(12.7 mm) deep (it is not necessary to use the entire gallon at once).
5. Plug in the unit.
6. Turn kettle heat ON. When solution starts to boil, turn kettle heat OFF.
7. Allow kettle to cool at least 1 hour, then unplug unit.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 11
gmpopcorn.com
8. Dump solution into a bucket, do not spill any in the interior of machine.
9. Rinse kettle interior with clean water and a clean cloth.
10. Dump any water remaining into a bucket (do not spill any in the interior of machine),
then wipe the kettle interior clean with a clean dry cloth.
For an extra dirty kettle, the process may be repeated; or, after turning kettle heat OFF,
allow solution to sit in kettle overnight. The next morning, finish the cleaning steps.
11. With unit OFF and unplugged, use a clean SLIGHTL damp cloth (wring AN EXCESS
water from cloth before use) and wipe the kettle lead cord clean. DO NOT get moisture
into the kettle lead-in cord, severe damage will result.
12. After kettle cleaning, check to be sure the crossbar fasteners are securely tightened.
Daily Unit Cleaning Instructions
1. Turn machine OFF, unplug unit and allow it to cool before attempting to clean.
2. Remove any remaining popcorn.
3. Remove all pans/accessories and take them to the sink to clean with soap and water,
then rinse and dry.
4. Wipe the unit clean using a clean, SLIGHTL damp cloth to remove any grease from the
glass and cabinet (cloth may be SLIGHTL dampened with soap and water, then wipe
again with clean water to remove any remaining cleaner).
5. Clean glass panels with glass cleaner. Gold Medal Watchdog Glass Cleaner (Item No.
2588) is recommended.
Ammonia cleaners will damage plastic doors/panels. Only use a non-ammonia cleaner,
such as Gold Medal Watchdog Glass Cleaner (Item No. 2588).
6. Reinstall the clean, dry pans/accessories.
7. Check the kettle lead cord, make sure it is fully plugged into the kettle receptacle and
the plug (or plug collar) is fully twisted to lock it into place.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 12
gmpopcorn.com
Filter Cleaning Instructions
The popcorn machine is equipped with an efficient and durable filtration system. The filter
should be cleaned every 1-2 weeks to maintain maximum efficiency.
Steps to Clean Filter
Step : Turn unit OFF and allow it to cool before
removing filter. Filter is located inside the popcorn
machine, above the popping kettle.
Step 2: Remove filter by gripping the filter itself and
pulling straight down.
Step 3: Clean filter in warm soapy water, then rinse
and allow to dry overnight. Replace filter by putting it
into the slot and pushing upward. Make sure the filter
frame is flush with the ceiling of the popper (as shown
above).

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 13
gmpopcorn.com
Troubleshooting
Issue
Possible Cause
Solution
No Power to the Unit A. No Power to the Unit A. Make sure the unit’s power cord is plugged in.
Kettle Does Not Heat A. Power to the Kettle A. Make sure kettle lead-in cord is plugged in and
twisted to lock into the kettle receptacle.
B. Kettle Heat Switch B. Have a qualified service person check the
voltage to and from the Kettle Heat Switch; if
switch is defective, replace it.
C. PowerOff Control C. Units with the PowerOff Control feature, kettle
heat will automatically shut OFF after 15
minutes of idle time (no popcorn popped).
The small green neon light in the Kettle Heat
Switch will blink OFF-ON to indicate the kettle
has been automatically turned OFF.
To restart kettle heating, cycle the Heat Switch
OFF-ON. Reference the Controls and Their
Functions section of this manual.
D. Heating Element D. Heating element in the kettle may be burned
out. Check with a qualified service person for
inspection/repair.
Long Popping Cycles
(Longer than 4 minutes for
Salt Popcorn)
A.
Low Voltage
A.
If the machine is operated on low voltage, this
could cause the kettle not to reach the proper
operating temperature. Check with a qualified
electrician.
B. Inadequate Supply Lines B. Inadequately sized electrical supply lines or
use of extension cord, in addition to being a
fire hazard, would also prevent the kettle from
reaching the proper operating temperature.
Check with a qualified electrician.
C. Inferior Corn C. Inferior quality corn would result in longer
popping cycles. Use only top quality hybrid
popcorn from reputable suppliers. Even then,
if you let your corn pick up moisture or dry
out, your popping cycles will be slow.
Kettle Agitator Shaft not
Rotating
If the kettle agitator shaft is
not rotating, DO NOT pop
corn.
A. Kettle Motor Switch A. Make sure the Kettle Motor Switch is ON. If the
switch is ON, and the shaft is not rotating, the
switch or motor may be faulty, contact
qualified service personnel for
inspection/repair.
B. Kettle Agitator Shaft/Stir
Blade not rotating. (Unit
must be OFF, unplugged
and cool prior to
checking or adjusting
the agitator assembly.)
B. Kettles with a FLOATING Stir Rod – lift the
agitator weight and check the clearance
between the shaft and the kettle bottom; it
should be a minimum of 1/32” (1 mm)
(thickness of a dime).
To make shaft adjustments, reference the
Agitator Set Collar Adjustment section.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 14
gmpopcorn.com
Agitator Set Collar Adjustment
The following instructions describe how to properly adjust set collars on an agitator assembly
with a floating stir rod.
Drive Motor
Spur Gear
Agitator’s Spur Gear
(should set halfway up on
Drive Motor Spur Gear)
Set Collar
w/Set screw
Spur Gear Placement
Needle Bearing
(should set at least
halfway into Gear Block)
Gear Block
Step : Turn machine OFF, unplug unit, and
allow it to cool completely before attempting
to adjust the agitator height.
Step 2: Loosen the set screw in each set collar
to be adjusted.
Step 3: With the kettle mounted in the popper,
adjust the shaft so the Spur Gears are halfway
engaged, and the Needle Bearing is at least
halfway engaged in the gear block (reference
image at right).
DO NOT set spur gears at full gear contact; it
can cause binding as the kettle is dumped.
Step 4: Snug tighten only, the set screw in set
collar above the crossbar to hold position. Then,
lift the agitator weight and check the clearance
between the shaft and the kettle bottom. If
there is adequate clearance, fully tighten the set
screw to secure set collar in place.
Step 5: Adjust clearance between the bottom of
the crossbar and the lower set collar to 1/32”
(1 mm) (thickness of a dime); then re-tighten
set screw to secure in place (reference image).
Step 6: Adjust set collar for agitator weight to
be between 3/16” to 1/4” (4.8 to 6.4 mm) above
the agitator weight.
Once adjusted,
re-tighten set screw
to secure in place.
Agitator shown for general
image reference only (lids
not shown for clarity).
Adjust clearance to /32”
( mm) (thickness of a dime)
3/ 6” to /4” max.
(4.8 to 6.4 mm)
Steps to Adjust Set Collars
Set Collar above Crossbar
Lower Set Collar
(below Crossbar)
Set Collar
(for Agitator Weight)
Agitator Weight
Stir Rod
Crossbar
Agitator Shaft

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 15
gmpopcorn.com
MAINTENANCE INSTRUCTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
008_051514
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
014_020416
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
CAUTION
THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY
FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH
ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE
OPERATOR.
027_010914

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 16
gmpopcorn.com
ORDERING SPARE PARTS
1. Identify the needed part by checking it against the photos, illustrations, and/or
parts list. (General images may be used in manual for reference only.)
2. Use only approved replacement parts when servicing this unit.
3. When ordering, please include part number, part name, and quantity needed.
4. Please include your model number, serial number, and date of manufacture (located
on the machine nameplate/data plate) with your order.
5. Address all parts orders to Parts Department, Gold Medal Products Co., 10700
Medallion Drive, Cincinnati, Ohio 45241-4807
or place orders by phone or online:
Phone: [phone]
[phone]
Fax: [phone]
[phone]
E-mail: inf[email protected]
Web Page: gmpopcorn.com

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 17
gmpopcorn.com
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS (Height x Width x Thickness)
Front and Side Glass: 21 1/4” X 16 7/8” X 1/8” (3 Pieces)
1. With the machine OFF, unplug the unit and allow it to cool before attempting to
replace any glass.
2. Carefully remove all loose pieces of broken glass.
3. Pull out Magnetic Clip (located above glass panel in cabinet interior) to remove (see
Figure A below).
4. Slide glass panel up under top ridge, then swing the bottom of the panel out and lower
it away from unit (see Figures A and B below).
5. Carefully remove the rest of the broken glass.
6. Remove all rigid glass channels from around the glass to be replaced, set channels
aside for reuse.
7. Apply decals (if desired) to the new glass panel.
8. Slide rigid glass channels over the exposed edges of the new glass panel.
9. Carefully slide new glass panel up under top ridge, then lower it into the bottom channel.
10. Reinstall magnetic clip above the new panel in cabinet interior.
Figure A - Remove magnetic
clip located above glass panel.
Figure C – Swing bottom of
glass panel out, then lower
it away from unit.
Figure B - Slide glass panel
up under top ridge.
Magnetic
Clip
General images shown for glass installation reference only.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 18
gmpopcorn.com
12/14 oz. Kettle Assembly (58014) – Agitator Assembly View
Item Part Description Part Number
580 4
1 1/4-20 X 1/2 THUMB SCREW 61059
2 8-32 x 1/2 FH MS PH 106064
3 KETTLE & SHELL BLOCK 61013
4 DUMP HANDLE – BLOCK WELDMENT 88769
5 DUMP HANDLE KNOB 47110
6 8-32 X 1 FL HD PH MS 20068
7 LID & AGITATOR ASS (Complete Assembly) 58016
8 KETTLE CROSSBAR ASSEMBL 58015
9 FRONT KETTLE LID 47720
10 REAR KETTLE LID 47119
11 AGITATOR BEARING HUB 43434
12 NEEDLE BEARING 47106
13
SPUR GEAR KIT (Includes 2 gears with set
screws. Always replace Agitator Spur Gear and
Kettle Drive Motor Gear as a set.)
47059K
14 SET SCREW #10-32 X 3/16 41742
15 12/14 OZ. AGITATOR SHAFT 69712
16 SET COLLAR 5/16 ID 5/8 OD 46649
17 6 OZ. STIR ROD 69806
18 AGITATOR WEIGHT 69715
Complete Agitator Assembly (Includes Lids)
8 9 0
7
4
6
See Kettle
Bottom
Assembly.
Complete Kettle Assembly
Overall
Kettle 6 05 4EX
Crossbar Assembly 56000
4 5
3
2
5
6, 4
8 7
2
3*
4
*See Parts
List note.

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 19
gmpopcorn.com
12/14 oz. Kettle Assembly (58014) – Kettle Bottom View
Item Part Description Part Number
580 4
1 12/14 OZ. KETTLE BOTTOM ASSEMBL
(includes parts listed below) 58012
2 KETTLE SHELL 61017
3 KETTLE LEAD ASS 61226
4 KETTLE GASKET 61012
5 KETTLE INTEGRAL HTR 12/14 58011
6
12/14OZ SHUNT BAR
77879
7 8-32 TOP LOCK NUT (always replace if removed) 67943
8 482°F THERMOSTAT (includes two 6-32 screws) 76708
9 THERMOSTAT SHUNT BAR 47193
10 550°F THERMOSTAT (includes two 6-32 screws) 77108
9 0 8
Element
View
Lock Nut View
Top Lock Nut - Fastens
each thermostat and
ground. Install Lock Nut
with triangle in UP
position (as shown).
ONE TIME USE ONLY,
REPLACE NUT if
removed.
Thermostat
Welded Stud
7
58220 Kettle Bottom A ssembly
58220 Element Vie w
2
3
Kettle Bottom Assembly
5
4
6

SunnyPop 12 oz. Popper Model No. 2552-00-012
Page 20
gmpopcorn.com
Cabinet Exterior – Front View
Item Part Description Part Number
1 8-32 X 3/8 SLT. HWH M/S 42044
2 DOME WELDMENT 111417
3 21 5/16” GLASS CHANNNEL (used on the side
edges of the glass panels) 49844
4 16 1/4” GLASS CHANNEL (used on the top and
bottom edges of the glass panels) 74172
5 GLIDE 47328
6 10-24 X 3/4” HEX HEAD 41314
7 CRUTCH TIP BLACK 70 DURO 49123
7
5, 6
2
See Kettle
Assembly
Section
See Lighted
Sign Section
3
For Glass Panels,
see Replacing
Glass section.
4
Model 2552
-
00
-
0
2