golmar ART 7W/G2+ User manual

USER MANUAL
TECHNOLOGY
Cód. 50122463
2-wire installation
Art 7W monitor/G2+
Wi-Fi connectivity
TART 7W EN/G2+ REV.0220
09 : 27
0 -04-20207 Tues
Door panel Intercom Recordings Settings

2
CONTENTS
Contents ....................................................................................................................................................................2
Set-up warnings .........................................................................................................................................................2
VERY IMPORTANT (VILLA KIT: S5110 ART 7W) ......................................................................................................2
Characteristics...........................................................................................................................................................3
System operation .......................................................................................................................................................3
Art 7W/G2+ monitor .............................................................................................................................................. -4 19
Description ......................................................................................................................................................4
Installation .......................................................................................................................................................5
Installation terminals ........................................................................................................................................5
Configuration switches.....................................................................................................................................5
Main menu .......................................................................................................................................................6
Settings menu............................................................................................................................................. -17 0
Door panel call screen....................................................................................................................................11
Communication screen ..................................................................................................................................12
Image and communication settings ................................................................................................................13
Intercom menu..........................................................................................................................................1 -4 15
Recordings menu ..................................................................................................................................... -16 18
Settings and operation of the guard monitor.................................................................................................... 91
Special codes .....................................................................................................................................................2 -20 2
Cleaning the monitor ................................................................................................................................................23
Compliance..............................................................................................................................................................24
- before installing or marking modifications to the devices.Always disconnect the power supply
- The fitting and handling of these devices must be carried out by .authorised personnel
- The wiring must run at least .40cm away from any other wiring
-Do not overtighten the screws .of the monitor connector
- Install the monitor in adry protected location free from the risk of dripping or splashing water.
- Do not place in humid, dusty or smoky locations, or near sources of heat.
-Before connecting the device to the mains, check the connections between the door panel, power supply unit, distributors and
monitors,
-U Golmar (2x1mm²).se the cableRAP-GTWIN/HF
- Always follow the instructions contained in this manual.
SET-UP WARNINGS
ART MONITOR7W/G2+
TS5110 ART 7W
MANUAL
If you have the “S5110 ART 7W” villa kit with Soul door panel download, “TS5110 ART 7W (cód. 50122126)”
user manual from the next r i the link GolmarQR o n web: h! ps://doc.golmar.es/search/manual/50122126
VERY VILLAIMPORTANT ( KIT: S5110 ART 7W)
QR

3
SYSTEM OPERATION
-To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being made
and LED will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that a call is being
made. At this moment, the apartment's monitors receive the call. If another apartment is called by mistake, press the button
for the correct apartment and the first call will be cancelled.
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon displayed on the screen will blink green. To view the image from slave monitors 2 or 3,
press the screen for the image to appear. If the call is not answered within 45 seconds, LED will turn off and the
system will become free.
- If call transfer to your mobile phone has been programmed, you can cancel the transfer at any time from the monitor,
with it being necessary to communicate with the door panel from the main menu.
- To establish communication, press off-the-hook icon on the screen. Door panel LED willwill turn off and the led
turn on.
- on the screenConnection will last for 90 seconds or until on-the-hook icon is pressed . When communication ends,
LED will turn off and the system will become free. If vocal synthesis is enabled, a 'Communication is finished'
message will indicate that the call is over.
- ,To open door ó of the door panel on the screenpress the corresponding icon during the call or communication
processes: one press will activate the lock release for seconds and LED will also turn on for seconds. If vocal3 3
synthesis is enabled, a 'Door open' message will be indicated on the door panel.is
- 6 19Detailed operation of the monitor is described on pp. - .
CHARACTERISTICS
-Hands-free monitor.
- 7" TFT colour screen
- Touch screen for access and selection of menu function.
- Wifi smartphone.transmission monitor to call transfer to mobile Only the master monitor can activate Wi-Fi
transmission. (FA-ART 7W ).power supply unit required for apartment
- Monitor with simple installation (non-polarised 2 wires bus).
- User menu.
- Installer menu.
- .Image and communication settings menu
- Output to auxiliary call repeater (maximum 50mA/12Vdc).
- "HZ" input for calls from apartment front door. Up to monitors/ apartments with push button "HZ" activatedImportant: 6
at the same time (with system and monitors in standby).
- Door release 1 and 2 activation icons screen.
- Notification leds.
- Configuration switches (1 to 128) andto monitor callassign the address end of line.
12
ART MONITOR7W/G2+

4
ART 7W/G2+ MONITOR
Description
A. Speaker.
B. Notification icons:
Power on indicator.
Do not disturb.
Auxiliary relay activated.
Door opening.
New image/video.
Wi-Fi transfer activated.
C. Hidden start/stop communication button:(icon)
Note: ART 7W/G2+ monitor 'V.01 + No. 6539 and
V.02' or later: For the visually impaired, by default
deactivated (see p. 20-22 'special codes').
D. Raised dots for the visually impaired.
E. Touch screen.
F. Hidden door opening button.(icon)
Note: ART 7W/G2+ monitor 'V.01 + No. 6539 and
V.02' or later: For the visually impaired, by default
disabled (see p. 20-22 'special codes').
G. Microphone.
H. MicroSD card slot (not included).
Type: MicroSD Class 10 from 4Gb to 128Gb.
I. Wall mounting connector fixing (x4).
J. Configuration switches.
K. Installation terminals.
L. UID code label of the monitor.
ART MONITOR7W/G2+
A
E
B
C
D
F
G
H
I
J
KL
I
I
I
K
SA
GND
HZ
HZ
BUS
BUS
24V
GND
ON
1 2 3 4 5 6 7 8
UID: mnvx8d8uskpv

5
Installation
ART 7W/G2+ MONITOR
Installation terminals (K)
For ease of installation, the installation terminals are removable and supplied in a separate bag. Once the
terminals are wired, place them in position.
BUS BUS, : communications bus (non-polarised).
24V, : local power input.GND
SA GND, : auxiliary call repeater output (maximum 50mA/12V).
HZ HZ, : apartment front door button input:
Note: ART 7W/G2+ monitor 'V.01 + No. 6539 and V.02' or later: Connect
only on the master monitor. The signal received is then transmitted to the
slave monitors in the same apartment through the BUS.
Configuration switches ( )J
Avoid dusty or smoky environments or locations near sources of heat.
For proper installation, use the template supplied with the product.
1. Position the top of the template at a height of 1.65m.
2. If you are going to use an embedding box to pass the wiring through, make sure that it is in line with the holes
corresponding to the box model chosen and fix the connector. If you prefer to fix the connector directly to the
wall, make four 6mm holes at the points indicated (A), insert the wall plugs supplied and screw in the connector.
3. Pass the installation wires through the middle hole and connect them to the removable terminals as shown in the
wiring diagrams. Before connecting the removable terminals to the monitor, configure the switch as indicated
below.
4. Connect the removable terminals to the monitor and place the monitor in front of the connector, making sure the
fixings line up. Move the monitor downwards to secure it.
ART MONITOR7W/G2+
Note: HZ push button function mode (ART 7W/G2+ monitor "V.0 or later):5" When HZ push button is pressed will
be call tone and activate the output of auxiliary call repeater with standby monitor, call process, communication
process (HZ tone with lower audio level), intercom process and "Do not disturb" mode. Important: Up to monitors/6
apartments with push button "HZ" activated at the same time (with system and monitors in standby).
Building / Villa (Nexa Door Panel)
Switches 6 and 7: These define whether the monitor is master or slave. Each apartment must have one master
monitor, and only one.
Master Slave 1 Slave 2 Slave 3
Switch 8: This activates the end-of-line resistance in the ON position.Activate it in monitors where the bus cable ends.
Deactivate it only in intermediate monitors.
ART7W/G2+ monitor with V.06 and previous (addresses 1 to 32):
Switches 1 to 5: Sets the monitor address (addresses to 3 ).1 2
The switches set to OFF have a zero value. The values of the switches set to ON are shown in the table below. The
monitor code is the sum of the values of the switches set to ON.
123
ON
4 5 6 7 81 2 3
ON
4 5 6 7 8123
ON
4 5 6 7 81 2 3
ON
4 5 6 7 8
1 2 3
ON
Example: 0 + 0+4+0+16 = 20
Switch number: 12345
Val ON:1 2 4 8 16ue when
Table of values
4 5 678
Important: Apartment 1 (Dip1 to ON & Dip2-Dip5 to OFF)
ART 7W/G2+ monitor .with V.04 and later
Important: Apartment 32 (Dip1 - Dip5 to OFF)
ART7W/G2+ monitor with V.07 and next (addresses 1 to 128):
Switches to 71 : 1 2 ).to 1 8Sets the monitor address (addresses
The switches set to OFF have a zero value. The values of the switches set to ON are shown in the table below. The
monitor code is the sum of the values of the switches set to ON.
Switch 8: This activates the end-of-line resistance in the ON position. Activate it in monitors where the bus cable
ends. Deactivate it only in intermediate monitors.
To define whether the monitor is master or slave:
To define whether the monitor is master or slave (see special codes page to 22).20 Each apartment must have one
master monitor, and only one.
Important: Apartment 1 (Dip1 to ON & Dip2-Dip7 to OFF)
Important: Apartment 128 (Dip1 - Dip7 to OFF).
Switch number 6 7: 1 2 3 4 5
: 1 2 4 8 16Value when ON 32 64
Table of values
123
ON
E mpl : 0+ 0+4+0+16+ = 20xa e 0+0
4 5 6 7 8
SA
GND
HZ
HZ
BUS
BUS
24V
GND
ON
1 2 3 4 5 6 7 8

6
ART 7W/G2+ MONITOR
Main menu
09:27PM
07-04-2020 Tues
Door panel Intercom Recordings Settings
If the device is in standby (screen off), touch any part of the screen to activate it and bring up the main menu. The
device will return to standby mode after 20 seconds without activity.
Display the image from the door panels and cameras connected to the system.
Note: ART 7W/G2+ monitor 'V.01 + No. 6539 and V.02' or later: This enables the door panel camera
to be changed, the audio of the corresponding door panel to be activated and the door to be opened.
Nota: Monitor ART 7W/G2+ "V.0 ó :5 later The icon can be set to disable or enable in the main menu,
the icon will change colour (grey off, white on). See pages .20-22
Access the menu for intercom with other monitors in the system.
Display the list of images recorded in the device memory. If there are new or unseen images, the
number will be displayed in the top right of the icon and notification will illuminate. If theled
number is greater than 9, three points will be displayed.
Change the system settings.
Indicates that the inserted MicroSD card must be formatted from the monitor. Press to access the
storage functions menu and format the card.
Press to activate or deactivate Wi-Fi transmission. The icon will change colour (white on, grey off) and
notification icon will illuminate depending on the status.
Note:ART 7W/G2+ monitor 'V.01 + No. 6539 and V.02' or later:
Press for 3 seconds to activate/deactivate Wi-Fi transmission.
Important: Only the master monitor can activate Wi-Fi transmission.
Press for 3 seconds to activate or 1 second to deactivate the 'Do not disturb' function (the
monitor does not sound when a call is received). The notification( “HZ”p g 5)see note a e
icon will illuminate depending on the status.
2 ...
Important: New main menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
If there is a monitor configured as "guard" in the building, the icon will appear on the apartment’s
monitors. Press to make a call to the guard monitor, (see page 19).
Press to " " + &staircase light activation (SAR-G2 SAR-12/24 modules required).

7
ART 7W/G2+ MONITOR
Settings menu
Select one of the 16 languages available for the user interface. Once selected, confirm by pressing
icon , and the monitor returns to the settings menu.
Use icon to return to the main menu.
Settings
Do not disturb
Language
Storage
Time & Date
WiFi
Ringtone
About
Screen
Italiano Magyar
Nederlands Norsk Português
русский Slovenský Svenska
English Español Eλληνικά Français
ﺔ"ﺑ$ﻌﻟا Čeština
Dansk
Deutsch
Language
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+

8
ART 7W/G2+ MONITOR
Adjust the call volume and identify the origin of the calls when you are not in front of the monitor, select
the desired volume and melodies using the arrows. Once finished, confirm your selection with
icon .
Customise the monitor with one of the six available wallpapers, display the guard buttons, light (no
function) and the date/time on the main menu screen. Validate the changes made with icon ,
and the monitor will return to the settings menu.
Screen
22 / 02 / 2022
02
03
01
Month
22
23
21
Day
2022
2023
2021
Year
24H
00
01
23
Hour
14
15
13
Min
Date and time
Set the date and time of the system, and the presentation format. Change the values by sliding up or
down, and use the arrows to change the formats. Validate the changes made with icon , and
the monitor will return to the settings menu.
Settings menu
Call ringtone
1st ringtone screen 2nd ringtone screen
Access the 2nd screen Access the 1st screen
Call ringtone
Call volume
05 / 06
02 / 04
05 / 06
05 / 06
05 / 06
Door panel 1
Door panel 2
Door panel 3
Door panel 4
2
1
3
4
Bell
Intercom function
Guard
01 / 06
03 / 06
03 / 06
Wallpaper
Guard button
Light button
Date and time
Press start to clear the screen
Access
wallpapers:
The option selected
is shown in the main
menu.
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+

9
ART 7W/G2+ MONITOR
In some countries, the law does not permit the storage of images or videos for more than 30 days after
recording. The automatic deletion function performs this task for you. You can disable this function if
your country's legislation does not require it, or under your responsibility.
If you have not inserted a MicroSD card into your monitor, only still images can be recorded in the
internal memory of the monitor (up to 100). If you have inserted one, the images and videos will
always be recorded on the card, and the images in the internal memory cannot be displayed until
you copy them to the card.
From this menu, you can delete contents, copy from the internal memory to the SD card and format
the card.Any of these actions will require confirmation.
Use icon to return to the settings menu.
In the 'Do not disturb' settings, you can set a period of time during which the monitor will not sound
(“HZ”p g 5)see note a e when receiving calls. To do so, select the do not disturb function and
choose the time period. From the main menu, you can enable and disable the 'Do not disturb'
function regardless of the timer status.
If you wish to be contacted from another monitor in another apartment, activate the intercom function.
To activate the automatic door opening function (3 seconds after receiving a call from the door panel),
select the 'Automatic door opening' function. Then choose the time period. (This function is
disabled by default. To enable it, see pp. ).20-22
Validate the changes made with icon , and the monitor will return to the settings menu.
Settings menu
Do not disturb
2 : 001 07 : 00
Do not disturb
Activate intercom
07 : 00 07 : 00
Automatic door opening
Storage
Automatic deletion
Recording format
Internal memory
SD Card
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
Note: ART 7W/G2+ monitor "V.0 ó posterior:5 Allow disable enable images recording,/
( p ).see ages 20-22
ART MONITOR7W/G2+

10
ART 7W/G2+ MONITOR
The 'About' screen provides information about the device, such as the monitor version and itsfirmware
address.
Press 'Instructions manual' or 'Apps' to display the QR code that will take you to the updated downloads
of this instruction manual and the G2Call app for your mobile phone./ G2Call+ Depending onNote:
the version of your monitor, see the previous section .
Use icon to restore factory settings, such as language, melodies, etc. Wi-Fi parameters will not be
modified.
Use icon to return to the settings menu.
About
During the first startup of the device, we recommend resetting the Wi-Fi parameters using icon .
Note that .only the master monitor can activate Wi-Fi transmission
The Wi-Fi menu shows information about the identity of the monitor (UID), the name of the network to
which it is connected (SSID) and the signal strength. To connect the monitor to your Wi-Fi network,
you must use the app:
G2Call: ART 7W monitor with V.05 and previous. For the configuration and settings of the app, see
manual “TART 7W/G2+ EN REV.0120" (cód. 50122463).
G2Call+: ART 7W monitor with V.06 and later. For the configuration and settings of the app, see
manual “TAPP G2CALL+ G2+ ML REV.0121" (cód. 50123137).
Using icon , select the desired transfer mode ('instant' start of the call transfer to the mobile phone within 3
seconds of making the call on the door panel, 'No answer' start of the call transfer to the mobile phone 50
seconds after making the call on the door panel, 'Do not divert' there is no call transfer to the mobile
phone. Validate the changes made with icon , and the monitor will return to the settings menu.
Settings menu
Wi Fi-
Activate Wi-Fi
UID vpks9mfkrpxk
SSID - network Golmar WiFi
Call transfer No answer
Access the call
transfer modes:
Do not divert
Instant
FW
Monitor address
Instructions manual
Apps
001/M
1.06
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
( )
*
( )
*
( )
*

11
ART 7W/G2+ MONITOR
Door panel call screen
This screen is displayed when receiving a call or pressing icon of the main menu. During a call, icon .
displayed on the screen will blink green (during the call process). In the top centre of the screen, the date and
time are shown and, on the right, the source of the image is displayed. The call has a duration of 45 seconds.
The ringtone ends.
Access the image and communication settings menu.
Start or end audio communication with the door panel displayed. Communication
has a maximum duration of 90 seconds. Once communication has ended, the screen will
turn off.
Change the source of the image as long as the system has more than one door panel or has an
external camera connected and display has been activated (see p. ). It is possible to make20-22
the change during display, call and communication processes.
Activate the lock release (or device connected to the relay output of the door panel) for 3 seconds2
(factory setting, programmable by the installer; see . During activation, indicator willp. 20-22
illuminate.
if you have a MicroSD card inserted, it starts recording a 15-second video within a few seconds of
receiving the call. Otherwise, it will take a photograph. In the top left of the screen, icon is
displayed and indicator will illuminate.
By pressing, it records a video. (See p. to set the recording mode).9
1
2
07-04-2020 Door panel 111:17:10
12
A few seconds after receiving a call, it automatically takes a photograph. In the top left of the screen,
icon is displayed and indicator will illuminate.
By pressing, it takes a photograph. (See p. to set the recording mode).9
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
Activate the lock release (or device connected to the relay output of the door panel) for 3 seconds1
(factory setting, programmable by the installer; see . During activation, indicator willp. 20-22
illuminate.

12
ART 7W/G2+ MONITOR
Communication screen
This screen is displayed during a communication process. In the top centre of the screen, the date and time are
shown and, on the right, the source of the image is displayed.
End audio communication with the door panel displayed and then show the main menu.
07-04-2020 Door panel 111:17:10
12
Access the image and communication settings menu.
Start or end audio communication with the door panel displayed. Communication
has a maximum duration of 90 seconds. Once communication has ended, the screen will
turn off.
Change the source of the image as long as the system has more than one door panel or has an
external camera connected and display has been activated (see p. ). It is possible to make20-22
the change during display, call and communication processes.
If you have a MicroSD card inserted, it starts recording a 15-second video within a few seconds of
receiving the call. Otherwise, it will take a photograph. In the top left of the screen, icon is
displayed and indicator will illuminate.
By pressing, it records a video. (See p. to set the recording mode).9
1
2
A few seconds after receiving a call, it automatically takes a photograph. In the top left of the screen,
icon is displayed and indicator will illuminate.
By pressing, it takes a photograph. (See p. to set the recording mode).9
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
Activate the lock release (or device connected to the relay output of the door panel) for 3 seconds2
(factory setting, programmable by the installer; see . During activation, indicator willp. 20-22
illuminate.
Activate the lock release (or device connected to the relay output of the door panel) for 3 seconds1
(factory setting, programmable by the installer; see . During activation, indicator willp. 20-22
illuminate.

07-04-2020 Door panel 111:17:10
12
13
ART 7W/G2+ MONITOR
Image and communication settings
During the display or call process, it is possible to adjust the image parameters (brightness, contrast and colour).
Press icon and use the slider bars to adjust the settings. By pressing the icon again, the settings window will
disappear.
07-04-2020 Door panel 111:17:10
12
During the communication process, it is possible to adjust the image parameters (brightness, contrast and colour),
and the audio level of the monitor speaker.
Press icon and use the slider bars to adjust the settings. By pressing icon again, the settings window will
disappear.
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+

14
ART 7W/G2+ MONITOR
Intercom menu
From this menu, you can contact other monitors in your apartment (internal intercom) or building (external
intercom). To do so, your monitor and the monitor called must have the intercom function activated from the 'Do
not disturb' menu (see p. ).9
Use icons and to switch between internal and external intercom screens.
If during an intercom process with another monitor a call is received from the door panel, the intercom process will
be terminated, and the door panel call will be received on the corresponding monitor.
Use icon to return to the main menu.
Intercom
Internal intercom.
Select the monitor you wish to communicate with. The monitor that appears selected by default is your own. You
will find information about the address of the monitor in the 'About' menu (see p. 1 ). If you select the 'All'0
option, the rest of the monitors will receive the call, with communication established with the first one that
answers.
To make a call, press icon , and the 'Call in progress' message will appear on the screen. The monitor(s) that
receives the call will display the 'Incoming call' message, followed by the monitor making the call. To cancel the
call, press icon , and the 'Communication completed' message will appear. To establish communication,
press icon ; communication will end after 90 seconds or when icon is pressed.
M
S2
S3
S1
Master
Slave 1
Slave 2
Slave 3 All
Monitor making the call Monitor receiving the call
Intercom function
Call in progress
45"
Slave 1
Intercom function
Incoming call
45"
Master
To perform an internal broadcast process, select the monitor to and then pressestablish communication
icon ; it is now possible to talk, listen, and raise and lower the communication volume from each of these 2
monitors. Communication will last for 90 seconds or until icon is pressed.
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
Continued overleaf

Intercom
15
ART 7W/G2+ MONITOR
Intercom menu
External intercom.
Enter the code of the apartment with which you wish to communicate using the keypad.
To make a call, press icon , and the 'Call in progress' message will appear on the screen. The master monitor of
the apartment called will display the 'Incoming call' message, followed by the monitor making the call. To cancel the
call, press icon , and the 'Communication completed' message will appear. To establish communication, press
icon ; communication will end after 90 seconds or when icon is pressed.
002
1
4
2
5
3
6
7 8
0
9
Apartment monitor 001 makes the call Apartment monitor 002 receives the call
Intercom function
Call in progress
45"
002
Intercom function
Incoming call
45"
001
Apartment monitor 001 in communication Apartment monitor 002 in communication
In communication
90"
002
Intercom function
In communication
90"
001
Intercom function
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
Continued from previous page.

16
ART 7W/G2+ MONITOR
Recordings menu
This menu displays the list of images saved in the monitor or on the SD card if inserted. Press icon to access
the video recordings saved on the SD card and icon to return to the images list. There are 10 recordings per
page and the number of pages is shown at the bottom of the screen. Use the scroll arrows to access the rest of
the pages.
Symbol indicates that the recording has not been displayed.
Use icon to return to the main menu.
To delete one or more recordings from the list, use icon . Press on the recordings you wish to delete or use
icon to select all of them. Confirm your selection using icon : a warning screen will request your final
confirmation.
Use icon to return to the image recordings list.
Delete picture 01 / 03
Picture
0 00301 /
0 00301 /
Continued overleaf
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
20-04-2020 10-04-2020
18-04-2020 08-04-2020
16-04-2020 06-04-2020
14-04-2020 04-04-2020
12-04-2020 02-04-2020
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
20-04-2020 11-04-2020
20-04-2020 08-04-2020
17-04-2020 04-04-2020
15-04-2020 01-04-2020
12-04-2020 22-03-2020
18:12:23 20:27:25
12:27:22 11:17:10
16:41:33 15:43:50
09:55:42 22:11:00
23:00:00 08:07:06

17
ART 7W/G2+ MONITOR
Recordings menu
Video
0 00301 /
To delete one or more recordings from the list, use icon . Press on the recordings you wish to delete or use
icon to select all of them. Confirm your selection using icon : a warning screen will request your final
confirmation.
Use icon to return to the video recordings list.
Delete video 01 / 03
0 00301 /
Press icon to access the video recordings.
Continued overleaf
Continued from previous page.
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+
20-04-2020 11-04-2020
20-04-2020 08-04-2020
17-04-2020 04-04-2020
15-04-2020 01-04-2020
12-04-2020 22-03-2020
18:12:23 20:27:25
12:27:22 11:17:10
16:41:33 15:43:50
09:55:42 22:11:00
23:00:00 08:07:06
20-04-2020 10-04-2020
18-04-2020 08-04-2020
16-04-2020 06-04-2020
14-04-2020 04-04-2020
12-04-2020 02-04-2020
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10

07-04-2020 Door panel 111:17:10
To view an image recording, select it in the list. The recording will be displayed full screen. Use the scroll arrows to
display the next or previous recording. From this screen, you can also delete the recordings individually,
which always requires your confirmation. Use icon to play the images in sequence; press icon to stop
image playback.
Use icon to return to the image recordings list.
014 / 020
18
ART 7W/G2+ MONITOR
Recordings menu
07-04-2020 Door panel 111:17:10
To view a video recording, select it in the list. The recording will be displayed full screen. Use the scroll arrows to
display the next or previous recording. From this screen, you can also delete the recordings individually,
which always requires your confirmation. Use icon to start playback of the video selected; press icon to
stop video playback.
Use icon to return to the recordings list.
014 / 020 00
Continued from previous page.
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+

Settings "guard monitor" mode:
The monitor/s to be configured as a guard monitor/s (up to 4 monitors) in the building, must be
configured with and as , , or . Then enter the special codeaddress 1 master slave 1 slave 2 slave 3
' ' in a master monitor (see special codes on pages 20 to 2 ), the monitor/s with address 1 will5001 2
be now a guard monitor/s with and displaying the symbol at the top right of theaddress 129
main menu screen. The access door panel will auto-configure the on the soundNote: button P1
module with the .call address 129
Operation of the "guard monitor":
-The master and slave monitor(s) receive the call from the access door panel (by pressing button P1
on the sound module).
-The master and slave guard monitor(s) can be autoswitch-on with the access door panel.
- receives calls from the apartments (by pressing the button belowOnly the master guard monitor
icon on the main menu of the apartment monitor).
-The master and slave guard monitor(s) can be used to call the apartmets (intercom menu).
-It allows internal intercommunication between the guard monitors.
Guard monitor main menu screen
In the main menu monitor/s of the apartments, the icon of call to guard monitor will be displayed.
Press the button below the icon to make a call to the guard monitor.
Important: Only the master guard monitor will receive the call from the apartment.
Main menu monitor/s of the apartment
SETTINGS AND OPERATION OF THE GUARD MONITOR
19
ART MONITOR7W/G2+
09:27PM
07-04-2020 Tues
Door panel Intercom Recordings Settings
09:27PM
07-04-2020 Tues
Door panel Intercom Recordings Settings

20
SPECIAL CODES
The enabling of some functions, as well as the modification of some factory parameters, can be carried out by entering
special codes. To do so, the installer menu must be accessed from the monitor. Go to the 'About' screen in the
settings menu (p. 1 ) and press five times on icon in the top left of the screen to bring up a keyboard to enter the0
codes.
The 'special codes' screen will then be displayed. The codes must be entered one by one and validated using icon .
If the code entered is valid, the 'OK' message will be displayed; if not, the 'ERROR' message will be displayed.
Use icon to return to the 'About' screen.
0141
1
4
2
5
3
6
7 8
0
9
Settings
About
FW
Monitor address
Instructions manual
Ap sp
001/M
1.06
'About' screen
‘Special codes' screen
Press 5 times
Continued overleaf
Important: New settings menu with ART 7W G2+ monitor with V.04 and later.
ART MONITOR7W/G2+