Grandstream Networks BUDGE TONE-100 User manual

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.1
GRANDSTREAM BUDGE TONE-100
IP PHONE
INSTALLATION GUIDE

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.2
SUMMARY
SERVIZIO VOIP SKYPHO...................................................................................................3
BUDGE TONE-100 PACKAGE CONTENT .........................................................................3
DEVICE PHISICAL CONNECTION .....................................................................................4
ACCESS TO THE DEVICE..................................................................................................5
Access to IP Phone when the DHCP service is working......................................................5
Access to IP Phone when the DHCP is not working ............................................................6
CONFIGURATION VIA WEB BROWSER ...........................................................................7
LAN Parameters ..................................................................................................................7
VoIP Parameters .................................................................................................................7
NTP Parameters ..................................................................................................................8
Save Configuration ..............................................................................................................8
IP PHONE GRANDSTREAM BUDGE TONE-100 CONFIGURATION PARAMETERS.......9

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.3
SERVIZIO VOIP SKYPHO
The use of SKYPHO VoIP (Voice Over IP) service is simple and quick. You need only an Internet access, the Budge
Tone-100 IP Phone (the IP telephone) and a PC, and with few “clicks” you could use the new telephone line with quality
equal to the traditional landline.
To use the SKYPHO’s VOIP service, you need:
- One computer with an Ethernet port;
- One modem/router with a LAN port
- One Internet access;
- One Username and one Password (account SIP).
The SIP account is the registration made on SKYPHO’s server that allows the access the VoIP services provided by the
server itself. It is composed by a Username, coincident with the telephone number you have been assigned and a
Password (confidential access code) by which you can access the telephone services of Eutelia.
ATTENTION! The confidentiality of these data is necessary in order to guarantee that the service will be accessed only
by you. For your major safety, you can choose a new password by accessing on Eutelia’s registration site.
BUDGE TONE-100 PACKAGE CONTENT
 One IP GRANDSTREAM BUDGE TONE-100 telephone
 One Ethernet cable (rj-45)
 One power adapter
IP Phone
GRANDSTREAM BUDGE TONE-100
Ethernet cable (rj-45) Power adapter

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.4
DEVICE PHISICAL CONNECTION
First of all, you have to make the physical connection of the device, following the simple instructions hereafter included:
Internet
Internet
 Insert the Ethernet rj-45 cable in the PC
port of the GRANDSTREAM BUDGE
TONE-100
 Connect the other end to the Ethernet
port on your personal computer
 Connect the power adapter provided with
the GRANDSTREAM BUDGE TONE-100
to the wall socket
 Insert the Ethernet cable to the LAN
GRANDSTREAM BUDGE TONE-100
port
 Connect the other end of the cable to
your LAN (Hub/Modem/Router).
Once completed the connections as indicated, the LCD
display will light.
Network Led
Blinking shows that the LAN connection is not working or the telephone is not registered.
Turned off shows that the telephone didn’t receive an IP address or that the SIP server is not
localized.
Lighted shows that the telephone has received the IP address and that has been registered on
the SIP server.
Micro-telephone Led
Turned off shows that the micro-telephone is hooked.
Lighted shows that the micro-telephone is unhooked.
Loudspeaker Led
Blinking during the receipt of a telephone call.
Turned off shows that the loudspeaker is not in use.
Lighted shows that the loudspeaker is in use.
Volume Led
Shows the volume level for both the micro-telephone and the loudspeaker with a range from 0
to 7.
Clock
It can be synchronized with the Internet server and can be configurable via web browser.

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.5
ACCESS TO THE DEVICE
Once completed the connections, you can proceed with the configuration of your GRANDSTREAM BUDGE TONE-100.
Before proceeding with the IP phone configuration it is necessary to verify if in your router the DHCP service is working,
(this means that in your LAN are used IP addresses in a dynamic way), or if the DHCP service is not working, (this
means that in your LAN are used IP addresses in a static way).
Based on what mentioned above, please proceed with the suitable instructions that follow.
Access to IP Phone when the DHCP service is working
1. verify that the LAN port of your PC is configured in order to obtain an IP address automatically.
Click on “Start \ Settings\ Network connections“, double
click on “Local area connections (LAN)” .
In the new window click on “Properties” and then double
click on “Internet Protocol (TCP/IP)”.
Verify that the option “Obtain an IP address
automatically” is activated or modify the setting and press
“OK” .
At the end, you can close all the opened windows.
2. verify which IP address has been assigned to your GRANDSTREAM BUDGE TONE-100.
Access your router in configuration mode and in the status information about the “LAN” or on “DHCP client” check
which IP address has been assigned to your GRANDSTREAM BUDGE TONE-100and write it down.
3. start your Web Browser (i.e. Internet Explorer), insert the IP address of your GRANDSTREAM BUDGE TONE-100
and press “GO”.
4. It will appear the window prompt for “Password” in which
you have to insert “admin”.
Attention! The confidentiality of these data is necessary
in order to guarantee that the equipment configuration is
accessible only by you. We suggest to proceed with the
configuration password change and to write down the
new one.
5. After few moments, the window “Grandstream IP Phone
Configuration” will appear. Here you can change the
parameters configuration of GRANDSTREAM BUDGE
TONE-100, as explained in the following chapter.
IMPORTANT: the changes made are not going to be effective before “Save” and “Reboot” of the IP Phone, as indicate in
the following pages.

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.6
Access to IP Phone when the DHCP is not working
1. configure the static IP address on the LAN port of your PC.
Click on “Start \ Settings\ Network connections“, double
click on “Local area connections (LAN)” .
In the new window click on “Properties” and then double
click on “Internet Protocol (TCP/IP)”.
Verify that the option “Use the following IP address” is
activated, or modify the setting and fill in the following
fields::
IP address: 192.168.0.x (in the example of the right site,
it is used the address 172.25.25.100)
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
For DNS servers should be used the IP addresses
provided by the Internet Service Provider.
Once finished the configuration, press “OK” and close all
the opened windows.
2. configure the static IP address on your IP Phone.
Press “MENU” on the IP Phone keyboard, on display of the telephone it will appear “[ 1] dhcP On”, press “MENU”
and then the key “↓” or “ ↑” to set “ - dhcP oFF” , at the end press “MENU”.
Press the key “↓”, on the telephone display it will appear “[ 2] IP Addr”, press “MENU”, digit 192.168.000.002 and
then press “MENU”.
Press the key “↓”, on the telephone display it will appear “[ 3] SubnET”, press “MENU”, digit 255.255.255.000 and
then press “MENU”.
IMPORTANTE: the changes made will be effective after turning off and turning on of the IP Phone.
3. start your Web Browser (i.e. Internet Explorer), insert the IP address 192.168.0.1 and press “GO”.
6. It will appear the window prompt for “Password” in which
you have to insert “admin”.
Attention! The confidentiality of these data is necessary
in order to guarantee that the equipment configuration is
accessible only by you. We suggest to proceed with the
configuration password change and to write down the
new one.
7. After few moments, the window “Grandstream IP Phone
Configuration” will appear. Here you can change the
parameters configuration of GRANDSTREAM BUDGE
TONE-100, as explained in the following chapter.
IMPORTANTE: : the changes made are not going to be effective before “Save” and “Reboot” of the IP Phone, as
indicate in the following pages.

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.7
CONFIGURATION VIA WEB BROWSER
Before proceeding with the configuration of your GRANDSTREAM BUDGE TONE-100 via WEB Browser, it is important
that you have at your disposal the Eutelia’s username and password for the VoIP service that you obtained during
registration or those you have modified on the Eutelia’s site.
LAN Parameters
1. Verify that, on the window “Grandstream IP Phone Configuration”, the option “dynamically assigned via DHCP
(default) or PPPoE”, the IP Address, is enabled.
Note! If in your LAN are used static IP addresses, it is necessary to select the option “statically configured as”
and you need to insert the appropriate values for “IP Address, Subnet Mask, Default Router, DNS Server 1 and 2”
in order to avoid network conflicts.
VoIP Parameters
2. Insert your SIP account values provided by SKYPHO during registration.
NOTE: The SIP account is the subscription registered on Eutelia’s server that allows to access to the VoIP
services provided by the server itself. It is composed by a User name, coincident with the telephone number you
have been assigned and a Password (confidential access code) by which you can access the telephone services
of Eutelia. User name and Password will be provided directly by Eutelia at the activation of the service.
SIP Server = voip.eutelia.it
SIP User ID = Telephone Number Assigned by SKYPHO
Authenticate ID = Telephone Number Assigned by SKYPHO
Authenticate Password = Password of the SIP account
Name = Name and Surname (the field is optional)

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.8
3. Set the sequence of the “Preferred Vocoder”, choosing the codecs of the menu for each field, as indicated in the
following picture, (G729, PCMA, PCMU, G723, ecc).
4. Insert the value “3” in the field “Rgister Expitration”.
5. Select the option “No” for “Use # as Dial Key”.
6. Verify that the “local SIP port” is set to “5060” and insert the value “13456” in the field “local RTP port”.
7. Select the option “Yes” for “NAT Traversal” and digit “stun.voip.eutelia.it” in the field “STUN server is”.
8. Select the option “Yes” for “via RTP (RFC2833)”.
NTP Parameters
9. Insert the value “62.94.7.9” in the field “NTP Server”, select your “Time Zone” and choose one of the field for the
“Date Display Format”.
Save Configuration
10. Once the configuration is finished, click on “Update” and then on “Reboot”.

IP PHONE – GRANDSTREAM BUDGE TONE-100 – Operating Manual pag.9
IP PHONE GRANDSTREAM BUDGE TONE-100 CONFIGURATION PARAMETERS
Device access credentials
IP address: Verify on ADSL modem
Password: admin
LAN PARAMETERS
LAN Configuration
IP Address:
“dynamically assigned via DHCP (default) or PPPoE”: DHCP on
“statically configured as”: 192.168.0.160 (DHCP off)
VOIP PARAMETERS
VoIP Protocol: SIP
SIP Server = voip.eutelia.it
SIP User ID = Telephone Number Assigned by SKYPHO
Authenticate ID = Telephone Number Assigned by SKYPHO
Authenticate Password = Password of the SIP account
Name = Name and Surname (the field is optional)
VoIP Audio Config
Preferred Codec : G729, PCMA, PCMU, G723
DTMF Tx Method: RFC-2833 Enable
VoIP SIP
Local Port: 5060
SIP Server: voip.eutelia.it
Expires: 3
VoIP RTP
RTP Port: 13456
VoIP STUN
STUN Server Address: stun.voip.eutelia.it
STUN Server Port: 3478
NTP PARAMETERS
NTP Configuration
NTP Server: 62.94.7.9
Time Zone: +1