Grange ELITE SQUARE PLANTER MEDIUM User manual

ESMP - 31cm [H] x 40cm [W] x 40cm [D]
ELITE SQUARE
PLANTER [MEDIUM]
Self-Assembly required Home Delivery available
www.grangefen.co.uk
All products and related emblems featured
are trademarks of Grange Fencing Ltd.
©2016 Grange Fencing Ltd
All rights reserved.
In line with the Company’s policy of
continuous product development, the
right is reserved to change and improve
product design without prior notice.
CODE: ESMP
40cm
40cm
40cm
31cm
31cm
PLAN
ESMP [A5 labels-Oct'16]] 15/9/17 13:24 Page 1

ASSEMBLY INSTRUCTIONS
ELITE SQUARE PLANTER [MEDIUM]
TOOLS REQUIRED:
RUBBER MALLET
SCREWDRIVER
SPANNER
B
A
PARTS LIST
HARDWARE
Screws x 8
Base Section x 1
Side Sections x 4
B
A
y
Top Nut x 4
v
Long Bolt x 4
xBase Nut x 4
Washers x 8
w
z
With the interlocking corners in
position it may be advisable to use
a rubber mallet to ‘gently’ drive
thelong bolt (y) through the
aligned holes.
Use Spanner to tighten the top
and bottom nuts (v/x)
Insert the Base Section (B)into
the bottom of the assembled
planter and secure in position
with the eight screws (z)
ASSEMBLY TIP:
The top edges of Side
Sections (A)are smooth
while the undersides have
nail holes visible.
B
B
AA
AA
z
z
v
w
y
v
w
y
w
x
x
w
A
ESMP [A5 labels-Oct'16]] 15/9/17 13:24 Page 2