Great Little Trading Carry Caddy User manual

1
Carry Caddy
26/03/2018
V1
easy - medium - hard one-person job
A few important pointers before you start:
•Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•Make sure you have the right tools.Allen keys are provided if required,
you need at the beginning of the instructions.
•It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
•Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or

2
WARNINGS!:
· • WARNING! Not suitable for children under 3 years due to small parts
which may become detached and present a choking hazard.
· • CAUTION Adult assembly required.
· • In an unassembled state product contains small parts which may pose a
choking hazard, not suitable for children under 3 years.
· • Assembly to be carried out by a competent adult only. During assembly
children should be kept away from the product due to possible risk of injury.
Do not use this item if any components are missing or damaged.
· • DO NOT use power tools in the assembly of this product as there is a risk
of over-tightening and consequently splitting of the wood
· • Wipe clean only.
· • Regularly check all fastenings, fixtures and fittings to ensure that
they are properly tightened.
· • Remove all packaging before giving to your child.
· • Colour and specification may vary.
· • Made in China.
· • Please retain this information for future reference.
Customer Service:
•
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
•We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
•Wipe clean using a soft damp cloth followed by a dry cloth.
•Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
•Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
0-3

3
Component Check List
A B
1x Front Panel
DC
1x Middle Divider Panel
#1
You will need (not supplied)
Phillips Head Screwdriver
1x Short Divider Panel 1x Back Panel
Hardware for Step 1:
4x #1 wooden dowels
Hardware for Step 2:
5x #2 22mmL screws
STEP 1:
Insert 4x wooden dowels (#1) into short divider panel (C). Now push middle divider
panel (B) and back panel (D) into the short divider panel using the dowels.
C
#1
B
#1
1x Handle 1x Left Side Panel
1x Base Panel 1x Right Side Panel
E F
HG
#1
8x Wooden Dowels
20mmL
10x Screws
22mmL
D
#1
#1
2x #1 wooden dowels
STEP 2:
Attach left side panel (F) to the assembly created in step 1, front panel (A) and handle (E)
using 2x wooden dowels (#1) and 5x screws (#2).
A
E
F
#1
#2
AAA#2
AAA#2
AAA#2
AAA#2
AAA#1
#1
#2
#2
#2
#2

4
Copyright© 2018 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
G
H
E
A
#2
#2
#1
STEP 3:
Carefully slide base panel (G) along the grooves located on the internal faces of
panels A, D and F.
Hardware for Step 4:
5x #2 22mmL screws
2x #1 wooden dowels
The assembly is now complete.
STEP 4:
Attach right side panel (H) to the assembly created in step 3, using 2x wooden
dowels (#1) and 5x screws (#2).
A
D
F
AAA#2
AAA
AAA#1
#2
#2
#2
#1