Great Little Trading Animal Stacking Box Mr. Fox User manual

1
Animal Stacking Box
22/05/2019
V1
easy - medium - hard one-person job
A few important pointers before you start:
•Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•Make sure you have the right tools.Allen keys are provided if required,
you need at the beginning of the instructions.
•Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or

2
Safety Warnings:
• WARNING! This is not a toy.
• Adult assembly required.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Unassembled product contains small parts which may present a choking
hazard.
• Assemble and use on a at and level surface.
• To avoid possible injury from tipping - Do not allow children to climb
on this or multiple stacked units.
• We recommend that the storage boxes are stacked in pairs only
• Maximum weight load is 5kg per box. Do not overload.
• Check xtures and ttings regularly and tighten as necessary.
• To avoid injury please use handles for carrying the product.Adult
assistance may be needed if full.
• CAUTION! If used or placed on painted or polished wooden surfaces,
some surface scratching may occur.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A B
C D
2x
#1 #2
2x 2x
1x
6x Screws
14mmL
8x Screws
25mmL
You will need
(not supplied)
Phillips Head
Screwdriver
STEP 1:
Attach the two panel Bs to the two panel As using 6x screws (#1).
Hardware for Step 1:
6x #1 14mmL Screws
A
#1
#1
#1
B
STEP 2:
Attach panel A to panel C using 2x screws (#2).
Hardware for Step 2:
2x #2 25mmL Screws
C
#2
#2
Ensure routed edge on panel A is
facing outwards.

4
STEP 3:
Attach the remaining panel A to panel C using 2x screws (#2).
STEP 4:
Slot panel D into the grooves provided in the two panels A and panel C.
A
Hardware for Step 2:
2x #2 25mmL Screws
#2
#2
D
STEP 5:
Attach the remaining panel C to the two panel As using 4x screws (#2).
Hardware for Step 5:
4x #2 25mmL Screws
#2
#2
#2
#2
C
Copyright© 2019 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Ensure the logo on panel D is
facing downwards.
Your Product is ready to use