Great Little Trading L4971 User manual

1
First Class Toy Post Ofce
19/03/2021
V2
easy - medium - hard
Assembly Difculty
one-person job
L4971
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult assembly required.
• Remove all packaging before giving to a child.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Not suitable for children under 3 years due to small parts which
present a choking hazard.
• Assemble and use on a at and level surface.
• To avoid possible injury, DO NOT allow children to climb/stand on the
product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check item regularly for signs of damage which may make the product
unsafe.
• Check all xtures and ttings regularly and tighten as necessary.
• Complies to the European Toy Safety Directive.
• DO NOT use this item if any structural components are missing or
damaged.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
Registered Address:
GLTC Ltd, 12 Buckhold Road,
Wandsworth, London, SW18 4GP, United Kingdom
Authorised Representative:Authorised
Representative Service, 77 Camden Street Lower,
Dublin, D02 XE80, Ireland

3
Component Check List
You will need
(not supplied)
Phillips Head
Screwdriver
A B C D Y Z A1 B1
E F GH
I J K L
M N
1x 1x 1x 1x 1x
8x Barrel Nut Bolts 8x Barrel Nuts 7x Screws
25mmL
5x Screws
16mmL
1x 1x 1x
1x 1x 1x 1x
1x 1x 1x 1 x
1x 1x
#1 #2
1x 1x
1x 1x 1x 1x
1x 1x 1x 1x
S T
U V
O P
Q R
WX
#3 #4

4
STEP 1:
Attach panel B to panel A using 2x barrel nuts & 2x barrel nut bolts.
Attach part C to panel A using 1x 25mmL screw.
STEP 2:
Firstly slot to together panels D & E.
Insert panel F into grooves on the internal faces of panel D and B.
As you are slotting panel F into panels D and B you also need to slot panel D into
the base panel (A).
STEP 3:
Slot panel G into panel into the slot on panel D.
STEP 4:
Turn base onto it’s side and attach panel H to panel A using 2x barrel nuts &
2x barrel nut bolts.
A
FH
E
B
B
G
#1
#1
#1
#1
#2
#2
#2
#3
Hardware for Step 1:
2x #1 Barrel Nut Bolts
2x #2 Barrel Nuts
1x #3 Screws 25mmL
Hardware for Step 4:
2x #1 Barrel Nut Bolts
2x #2 Barrel Nuts
C
#2
D
A
D
D
A

5
Hardware for Step 7:
2x #3 Screws 25mmL
STEP 6:
Attach worktop (I) to side panel (B) using 2x barrel nuts & 2x barrel nut bolts.
STEP 8:
Slot door (K) hinge into the hole on base panel (A).
STEP 5:
Attach scales (J) to worktop (I) using 2x 16mmL screws. STEP 7:
Secure divider panel (H) to worktop panel (I) using 2x 25mmL screws.
#3
#3
#4
#1
#1
#4
Hardware for Step 5:
Hardware for Step 6:
2x #4 Screws 16mmL
2x #1 Barrel Nut Bolts
2x #2 Barrel Nuts
J
K
I
I
I
#2
B
H
#2
A

6
STEP 9:
Slot door (K) hinge into the underside of panel L.
Now secure panel L to divider panel (H) using 1x
25mmL screw.
STEP 10:
Firstly slot panel N into the groove on the inside of divider panel (H). It should rest
on the top of panel L.
Now attach panel M to divider panel (H) using 1x 25mmL screw.
STEP 11:
Firstly slot the dowels on panel O into the holes on
divider panel (H).When in place, panel O should rest on
top of panel N and the ledge on panel M.
Now secure panel O to panel M using 1x 16mmL screw.
STEP 12:
Attach side panel (P) to panels M and L using
2x 25mmL screws.
When doing this, please ensure the dowels on panel
O slot into the holes on the inside face of panel P.
Hardware for Step 9: Hardware for Step 11:
Hardware for Step 10:
Hardware for Step 12:
1x #3 Screw 25mmL 1x #4 Screw 16mmL
1x #3 Screw 25mmL
2x #3 Screws 25mmL
P
O
O
M
M
L
N
N
#3
#3
#3
#3
#4
K
H
H
L
H
L
M

7
Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
The assembly is now complete.
STEP 13:
Turn product on it’s side and secure side panel (P) to
base panel (A) using using 2x barrel nuts and 2x barrel
nut bolts.
Now secure base panel (A) to panel M using
2x 16mmL screws.
Hardware for Step 13:
2x #1 Barrel Nut Bolts
2x #2 Barrel Nuts
2x #4 Screws 16mmL
#1
#2
#2
#4
#4
#1
AP
M