Great Little Trading L4491 User manual

1
Atlas Desk
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
L4491
01/10/2018
V1
easy - medium - hard
Assembly Difculty
two-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.

2
Safety Warnings:
• IMPORTANT READ CAREFULLY - RETAIN FOR FUTURE
REFERENCE
• CAUTION Adult assembly required.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury. Do not use this item if any components are
missing or damaged.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Assemble and use on a at and level surface
• This product is heavy.We recommend that you build it where you are
planning to use it.
• WARNING. Do not place this child’s desk near heat sources, windows
and other furniture.
• WARNING. Do not use this child’s desk if any part is broken, torn or
missing.
• Use only spare parts approved and supplied by the manufacture.
• Regularly check all xtures and ttings and tighten as necessary.
• Made in China
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List Component Check List
A B
C
E
G
I
D
F
H
x 1 LH Side Panel
x1 RH Side Panel
x1 Lower Cross Bar
x1 Adjustable Shelf Panel
x1 Desk Top Panel
x1 Central Support Panel
x1 Upper Cross Bar
x1 Back Panel
x1 Base Shelf Panel
J
x2 Wooden Handles
K L
M
O
N
x1 RH Drawer Side Panel
x1 Drawer Base Panel
x1 LH Drawer Side Panel
x1 Drawer Front Panel
x1 Drawer Back Panel

4
Component Check List Component Check List
#11 #12
#13 #14
#1 #2
#3
#5
#7
#9
#4
#6
#8
x25 Cam Locks
14mm Diameter
x2 Wooden Dowels
25mmL
x2 Barrel Nuts
x4 Screws 25mmL
x1 RH L-Shaped Runner
x1 LH Flat Runner
x4 Shelf Pegs
x2 Cross Head Bolts
x12 Screws 12mmL
x1 LH L-Shaped Runner
x1 RH Flat Runner
x2 Threaded Bolts
85mmL
x25 Cam Dowels
35mmL
#10
x1 Allen Key
Phillips Head Screwdriver
You will need (not supplied)

5
STEP 1:
Afx x11 cam dowels (#1) to desk top panel (A) with a philips screwdriver.
STEP 2:
Afx x2 cam dowels (#1) to side panel (B) and attach the LH at runner (#9) with x3
screws (#8) where shown. Ensure the wheel of the runner is facing in the opposite
direction to the cam dowels.
Next afx x2 cam dowels (#1) to central support panel (C) on the at side. Then
attach the RH at runner (#10) with x3 screws (#8) where shown. Ensure the wheel
of the runner is facing in the opposite direction to the cam dowels.
Hardware for Step 1:
Hardware for Step 2:
11x #1 Cam Dowels
4x #1 Cam Dowels
A
#1
#1
#1
#1
#1 #1
#1
#1
#1
#1
#1
#1 #1
#1 #1
#8 #8
#8
#8
B
C
#8
#8
#9
#10
#8
#8
#8
6x #8 12mmL Screws
1x #9 LH Flat Runner
1x #10 RH Flat Runner

6
2x #3 Wooden Dowels
Hardware for Step 3:
Hardware for Step 4:
4x #2 Cam Locks
6x #2 Cam Locks
C
C
I
D
B
E
F
B
#4
#3
#5
#3
#5
#4
#2
#1
#1
#2
#1
#2
#1
#2
#2
#1
#1
#2
#2
#2
#2
#2
2x #5 Barrel Nuts
2x #4 Bolts 85mmL
STEP 3:
With the help of a second person, stand up LH side panel (B) and slot upper cross
bar (E ) to the cam dowels at the top and afx with x2 cam locks (#2) from the inside.
Next slot lower cross bar (F) to the bottom of panel (B) using x1 wooden dowel (#3)
and insert x1 barrel nut (#5) on the back facing side of panel (F) and secure with x1
bolt (#4) through panel (B) using the allen key.
Next insert x1 wooden dowel (#3) to the lower cross rail (F) and slot central diver
panel C to the cross rail panels. Secure upper cross rail panel (E) with x2 cam locks
(#2) and insert x1 barrel nut (#5) to panel (F) and secure with x1 bolt (#4) using the
allen key.
STEP 4:
Carefully lower the desk so that the back of the desk to the oor. Insert x6 cam
dowels (#1) to the bottom of panels C and D. Slot in panel I to panel C ensuring the
cut out corner is on the front facing side and the grooved side is at the back, then
connect with side panel D. Secure the cam dowels by inserting x6 cam locks (#2) to
the hardware holes on the underside of panel I and turn clockwise.
6x #1 Cam Dowels

7
STEP 5:
With the assistance of a second person turn the desk
upright. Slide back panel (G) into the grooves on panels (C)
and (D) and insert shelf panel (H) using x4 shelf pegs (#13)
at the desired height.
STEP 6:
Insert x11 cam locks (#2) into the hardware holes where shown ensuring the open
part of the cam lock is facing upwards.Then with the help of a second person lower
desk top panel (A) on to the panels so the cam dowels connect with the hardware
#13
#13
#13
#13
Hardware for Step 6:Hardware for Step 5
11x #2 Cam Locks4x #13 Shelf Pegs
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
G
D
C
H
A

8
STEP 7:
Afx LH L-shaped runner (#12) to LH drawer side (K) with x3 screws (#8)
where indicated. Next afx RH L-shaped runner (#11) to RH drawer side panel
(L) using x3 screws (#8) where indicated.
Ensure that the wheel of the runner is at the same side as the hardware holes on
both panels.
K L
#8
#8
#8 #8
#11#12
#8
#8
Hardware for Step 8:
STEP 8:
Insert x 4 cam dowels (#1) to drawer front panel (M). Then attach the x2 wooden
handles (J) with x2 cross head bolts (#6).
M
J
J
#1
#1 #6
#6
#1
#1
Hardware for Step 7:
1x #12 LH ‘L-Shaped’
Runner
1x #11 RH ‘L-Shaped’
Runner
6x #8 12mmL Screws 2x #6 Screws 12mmL
4x #1 Cam Dowels

9
STEP 11:
Slot drawer back panel (O) to the drawer base and side panels ensuring the drawer
base slots into the groove.
STEP 12:
Secure the back panel with x4 screws (#7) on each side.
STEP 9:
Slot drawer front panel (M) to the drawer side panels K and L and secure with x4 cam
locks (#2).
STEP 10:
Slide the drawer base panel (N) into place along the grooves on drawer side panels K
and L.
M
K
L#2
#2
#2
#2
Hardware for Step 9:
Hardware for Step 12:
#7
#7
#7
#7
4x #2 Cam Locks
N
K
K
LL
O
4x #7 Screws 25mmL

10
Copyright© 2018 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 13:
Insert the drawer to the desk.
Your unit is ready to use.