Great Little Trading L5116 User manual

1
Reversible Under-Bed Storage Drawer
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
19/11/2020
V2
easy - medium - hard
Assembly Difculty
one-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
•Warning! Not suitable for children under 3 years due to small parts
which may become detached and present a choking hazard.
•Assembly by a competent adult is required.
•Unassembled product contain small parts which may pose a choking hazard
to young children.
•During assembly children should be kept away from the product due to
possible risk of injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• DO NOT use if any part of the drawer is damaged.
• Remove all packaging before allowing your child to use the product.
• Maximum weight load 5kg. Do not overload.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]

3
Component Check List
A
B
2x Panels (front and back are the same)
1x Base Panel
Component Check List
#1 #2
#3 #4
8x Cam Locks
14mm Diameter
8x Cam Dowels
35mmL
4x Castors16x Screws
12mmL
Philips Head Screwdriver
You will need (not supplied)
C
2x Side Panels

4
STEP 1:
Insert the cam dowels #1 into both panels A.
Hardware for Step 2:
4x #2 Cam Locks
#1
#1
#1
#1
#1
A
A
Hardware for Step 1:
8x #1 Cam Dowels
STEP 2:
When the front panel and side panels are in place as shown, insert the cam lock
hardware (#2) into the holes in the side panels and turn clockwise to lock and secure.
A
A
B
B
#2
#2
#2
#1
#1
#1
#2
#2
#2
Using Cam Locks:
When inserting into the panel, ensure that each cam
lock’s arrow is pointing towards the drill hole on
the side edge of the panel & the dowel that it will be
receiving.
When the panels are in the connected position,
using a screwdriver, turn the cam lock in a clockwise
direction to lock and secure.

5
STEP 3:
Slide the base panel C into the groove.
STEP 5:
Turn the drawer over and attach the wheels (#4) to
the underside using 4x screw (#3) per wheel.
C
#3
#4
C
STEP 4:
Connect 2nd panel A to the drawer as shown. When in place insert cam lock
hardware (#2) into the holes in the side panels and turn clockwise to lock and secure.
Hardware for Step 4:
4x #2 Cam Locks
#2
#2
#2
#2
A
#4
#4
#4
#3
#3
#3
#4
#34x
#34x
#34x
#34x
Hardware for Step 5:
16x #3 12mmL Screws
Copyright© 2016 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.