GREAT PLAINS 3N-4010F Series User manual

Manufacturing, Inc.
www.greatplainsmfg.com
© Copyright 2019 Printed 2019-03-08 196-359M
EN
Table of Contents Index
Table of Contents Index
ORIGINAL INSTRUCTIONS
Operator Manual
3N-4010F, 3N-4010HDF, and 3N-4020F
3-Section 40-Foot No-Till Drills
Read the operator manual entirely. When you see this symbol, the
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
Illustrations may show optional equipment not supplied with standard unit or
may depict similar models where a topic is identical.
20476

Machine Identification
Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new
manual.
If you or the dealer have added options not originally ordered with the machine, or removed options that were
originally ordered, the weights and measurements are no longer accurate for your machine. Update the record by
adding the machine weight and measurements with the option(s) weight and measurements.
Dealer Contact Information
Model Number
Serial Number
Machine Height
Machine Length
Machine Width
Machine Weight
Year of Construction
Delivery Date
First Operation
Accessories
Name:
Street:
City/State:
Telephone:
Email:
Dealer’s Customer
No.:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

3N-4010F, 3N-4010HDF, and 3N-4020F Cover Index Table of Contents iv
2019-03-08 Cover Index 196-359M
© Copyright 2003, 2004, 2006, 2007, 2008, 2010, 2012, 2013, 2017, 2018, 2019 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed
for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products
as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,
Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.
Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,
Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information.................................................1
Safety Decals ....................................................................6
Introduction...........................................................................11
Document Family.............................................................11
Description of Unit ...........................................................11
Models Covered by this Manual ...............................11
Intended Usage ........................................................11
Definitions.................................................................11
Using This Manual...........................................................12
Owner Assistance............................................................12
Preparation and Setup .........................................................13
Pre-Setup Checklist.........................................................13
Hitching............................................................................13
Make Electrical Connections ....................................13
Make Hydraulic Connections....................................14
Hydraulic Circuit Connections ..................................14
Initial Setup......................................................................16
Initial Tractor Setup ..................................................16
Drill Setup Checks....................................................17
Drill Option Setup .....................................................17
Install Weight Brackets (Option)...............................19
Operating Instructions .........................................................21
Pre-Start Checklist...........................................................21
Lift / Lower .......................................................................22
Opener Operation Lowered......................................22
Rephasing Lift System .............................................22
Folding the Drill................................................................23
Unfolding the Drill ............................................................24
Transport .........................................................................25
Pre-Transport Checklist............................................26
Loading Seed ..................................................................27
No Seed Lubricants..................................................27
Planting............................................................................28
Seed Rate ................................................................28
Point Row Switches.........................................................30
Point Row CAL Mode ...............................................30
Field Operations ..............................................................31
Final Field Checklist .................................................31
Planting Sequence ...................................................31
Marker Operation (Option)...............................................32
Shaft Monitor Operation (Option) .............................32
Parking ............................................................................33
Storage ............................................................................33
Hydraulic Drive Operation ...................................................34
Drive Operational Requirements .....................................34
Hydraulic System: ....................................................34
Electrical System:.....................................................34
Tractor Hookup................................................................34
Hydraulics: ...............................................................34
Electrical:..................................................................34
Controller Menu...............................................................35
Console Functions...........................................................36
Basic Operation...............................................................36
Power Up .................................................................36
Seed Rate ................................................................36
Power Off .................................................................36
Hydraulic Drive Field Operations.....................................37
Seed Rate Calibration .....................................................38
Seed Rate Calibration Steps....................................38
Hydraulic Drive Calibration.......................................39
Speed Calibration............................................................50
Varying Rates with Pre-set Function ...............................53
GPS-Based Planting .......................................................54
FarmWorks SiteMate ...............................................54
GP Precision Population Settings ............................55
Ag Leader PF3000 ...................................................56
Precision Population Settings ..................................57
Adjustments..........................................................................58
Planting Depth.................................................................58
Frame Level ....................................................................59
Frame Height...................................................................59
Frame Height without Frame-Mounted Coulters .............60
Frame-Mounted Coulters ................................................62
Frame Height - Frame Mounted Coulters ................62
Individual Frame-Mounted Coulter Depth ................64
Frame-Mounted Coulter Force.................................65
Row Unit Shut-Off ...........................................................65
Implement Lift Switch Adjustment ...................................66
Frame Weight..................................................................67
Available Down Force ..............................................67
Marker Adjustments ........................................................68
Marker Disk Adjustment ...........................................68
10 Series Row Unit Adjustments.....................................69
10 Series Row Unit Down Pressure.........................70
10 Series Disk Blade Adjustments ...........................71
10 Series Seed Firmer Adjustments ........................72
10 Series Opener Depth ..........................................73
10HD Series Row Unit Adjustments................................74
Unit-Mounted Coulter Adjustments ..........................75
10HD Row Unit Down Pressure...............................77

3N-4010F, 3N-4010HDF, and 3N-4020F Cover Index Table of Contents v
2019-03-08 Cover Index 196-359M
Row Unit Down Pressure .........................................78
10HD Disk Blade Adjustments .................................79
10HD Seed Firmer Adjustments...............................80
10HD Press Wheel Adjustments..............................81
20 Series Row-Unit Adjustments.....................................83
20 Series Row-Unit Down Pressure.........................84
20 Series Row-Unit Planting Depth..........................84
20 Series Disk Adjustments .....................................85
Side Gauge Wheel Adjustments ..............................85
20 Series Seed Firmer Adjustments.........................87
20 Series Press Wheels...........................................88
Troubleshooting ...................................................................89
General Drill Troubleshooting..........................................89
Point Row Troubleshooting .............................................91
Hydraulic Drive Troubleshooting .....................................91
Calibration Troubleshooting: ....................................94
Hydraulic Drive Troubleshooting Flow Chart ...................95
Hydraulic Drive Electronics Troubleshooting...................96
GPS Troubleshooting ......................................................96
Troubleshooting GPS with SiteMate ........................96
Troubleshooting GPS with PF3000 ..........................98
Maintenance and Lubrication ..............................................99
Welding............................................................................99
Seed Cleanout...............................................................100
Frame Alignment and Level...........................................100
Adjusting Fold Cylinders.........................................100
Level Frame Side to Side .......................................101
Level Frame Front to Rear .....................................101
Box Alignment ........................................................102
Tongue Spacer Block ....................................................103
Bleeding Hydraulics.......................................................104
Bleeding Lift Hydraulics..........................................104
Bleeding Fold Hydraulics........................................105
Marker Maintenance......................................................106
Bleeding Markers ...................................................106
Marker Speed.........................................................106
Marker Shear Bolt Replacement ............................107
Marker Chain Length..............................................108
Electric Clutch Lockup...................................................108
Hydraulic Drive Maintenance ........................................109
To change the element: .........................................109
Row Unit Maintenance ..................................................110
Seed Flap Replacement (s/n 1066TT-)..................110
Seed Flap Replacement (s/n 1067TT+).................110
10HD Opener Maintenance ...................................111
20 Series Opener Maintenance .............................111
Lubrication.....................................................................113
Options ................................................................................118
Hitch Options.................................................................118
Flat Fold Markers ..........................................................118
Dual Weight Kit..............................................................119
Frame-Mounted Coulters .......................................119
Coulter Tines .................................................................120
Shaft Monitor .................................................................120
Row Unit Options ..........................................................120
Seed Tube Plug .....................................................120
10HD Unit-Mounted Coulters .................................121
15in Coulter Blades................................................121
10HD Lock-Up Pin .................................................121
Inside Carbide Scrapers.........................................122
20 Series Depth Wheel Scraper.............................122
Seed Firmers.................................................................122
Seed-Lok® Seed Firmer ........................................123
Keeton Seed Firmer ...............................................123
Press Wheels ................................................................123
Appendix .............................................................................124
Specifications and Capacities .......................................124
Tire Inflation Chart.........................................................124
Torque Values Chart .....................................................125
Row Spacing Data.........................................................126
Hydraulic Diagram.........................................................129
Warranty........................................................................130

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 1
Important Safety Information
Look for Safety Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
Be Aware of Signal Words
Signal words designate a degree or level of hazard
seriousness.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
This signal word is limited to the most extreme situations,
typically for machine components that, for functional
purposes, cannot be guarded.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury, and includes hazards that are exposed when
guards are removed. It may also be used to alert against
unsafe practices.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe
practices.
Prepare for Emergencies
Be prepared if a fire starts
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.
Be Familiar with Safety Decals
Read and understand “Safety Decals” on page 6,
thoroughly.
Read all instructions noted on the decals.
Keep decals clean. Replace damaged, faded and illegible
decals.
000
112
911
999

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 2
Wear Protective Equipment
Wear protective clothing and equipment.
Wear clothing and equipment appropriate for the job.
Avoid loose-fitting clothing.
Because prolonged exposure to loud noise can cause
hearing impairment or hearing loss, wear suitable
hearing protection such as earmuffs or earplugs.
Because operating equipment safely requires your full
attention, avoid wearing entertainment headphones while
operating machinery.
Handle Chemicals Properly
Agricultural chemicals can be dangerous. Improper use
can seriously injure persons, animals, plants, soil and
property.
Do not use liquid treatments with drill.
Read and follow chemical manufacturer’s instructions.
Wear protective clothing.
Handle all chemicals with care.
Avoid inhaling smoke from any type of chemical fire.
Never drain, rinse or wash dispensers within 100 feet
(30m) of a freshwater source, nor at a car wash.
Store or dispose of unused chemicals as specified by
chemical manufacturer.
Dispose of empty chemical containers properly. Laws
generally require power rinsing or rinsing three times,
followed by perforation of the container to prevent re-use.
Avoid High Pressure Fluids
Escaping fluid under pressure can penetrate the skin,
causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.
Use a piece of paper or cardboard, NOT BODY PARTS, to
check for suspected leaks.
Wear protective gloves and safety glasses or goggles when
working with hydraulic systems.
If an accident occurs, seek immediate medical attention
from a physician familiar with this type of injury.

3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 3
2019-03-08 Table of Contents Index 196-359M
Use A Safety Chain
Use a safety chain to help control drawn machinery
should it separate from tractor drawbar.
Use a chain with a strength rating equal to or greater than
the gross weight of towed machinery.
Attach chain to tractor drawbar support or other specified
anchor location. Allow only enough slack in chain to
permit turning.
Replace chain if any links or end fittings are broken,
stretched or damaged.
Do not use safety chain for towing.
Check for Overhead Lines
Drill markers contacting overhead electrical lines can
introduce lethal voltage levels on drill and tractor frames.
A person touching almost any metal part can complete
the circuit to ground, resulting in serious injury or death.
At higher voltages, electrocution can occur without direct
contact.
Avoid overhead lines during seed loading and marker
operations.
Keep Riders Off Machinery
Riders obstruct the operator’s view. Riders could be
struck by foreign objects or thrown from the machine.
Never allow children to operate equipment.
Keep all bystanders away from machine when
folding/unfolding, raising/lowering markers,
raising/lowering openers, and transporting.
Use Safety Lights and Devices
Slow-moving tractors and towed implements can create
a hazard when driven on public roads. They are difficult
to see, especially at night.
Use flashing warning lights and turn signals whenever
driving on public roads.
Use lights and devices provided with drill.

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 4
Transport Machinery Safely
Maximum transport speed for drill is 20 mph (32 kph).
Some rough terrains require a slower speed. Sudden
braking can cause a towed load to swerve and upset.
Drill must be raised, locked-up, folded and locked for
transport.
Do not exceed 20 mph (32 kph). Never travel at a speed
which does not allow adequate control of steering and
stopping. Reduce speed if towed load is not equipped with
brakes.
Comply with national, regional and local laws.
Do not tow a load that weighs more than 1.5x the weight
of the tractor. See page 25 for details.
Carry reflectors or flags to mark drill in case of
breakdown on the road.
Keep clear of overhead power lines and other
obstructions when transporting. Refer to transport
dimensions under “Specifications and Capacities” on
page 124.
Shutdown and Storage
Clean out and safely store or dispose of residual
chemicals.
Secure drill using blocks and transport locks. Lower
openers if not locked up.
Store in an area where children normally do not play.
Practice Safe Maintenance
Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual on the Parts
manual for additional information.
Work in a clean, dry area.
Put tractor in park, turn off engine, and remove key before
performing maintenance.
Make sure all moving parts have stopped and all system
pressure is relieved.
Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on drill.
Inspect all parts. Make sure parts are in good condition
and installed properly.
Remove buildup of grease, oil or debris.
Remove all tools and unused parts from drill before
operation.
OFF
OFF

3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 5
2019-03-08 Table of Contents Index 196-359M
Tire Safety
Tire changing can be dangerous and should be
performed by trained personnel using correct tools and
equipment.
When inflating tires, use a clip-on chuck and extension
hose long enough for you to stand to one side–not in front
of or over tire assembly. Use a safety cage if available.
When removing and installing wheels, use wheel-handling
equipment adequate for weight involved.
Safety At All Times
Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.
Be familiar with all drill functions.
Operate machinery from the driver’s seat only.
Do not leave drill unattended with tractor engine running.
Do not dismount a moving tractor. Dismounting a moving
tractor could cause serious injury or death.
Do not stand between the tractor and drill during
hitching.
Keep hands, feet and clothing away from power-driven
parts.
Wear snug-fitting clothing to avoid entanglement with
moving parts.

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 6
Safety Decals
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
Read and follow decal directions.
Keep lights in operating condition.
Keep all safety decals clean and legible.
Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
Center rear of center box;
1 total
838-266C
Red Reflectors
On the outside edge of center walkboard each end;
4 total
838-265C
Amber Reflectors
On the ends and back edges of walkboards on both
wings;
2 total

3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 7
2019-03-08 Table of Contents Index 196-359M
838-267C
Daytime Reflectors
On the outside edge of center walkboard each end;
2 total
848-512C
Danger: Read Manual
On tongue at hitch;
1 total
818-590C
Danger: Crushing Hazard
On tongue near hitch;
1 total
838-102C
Danger: Falling Hazard
Outside edge of wing walkboards;
2 total
20301
20301
848-512C
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
20301
20301

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 8
818-045C
Warning: Pinch/Crush
On transport wheel assembly;
4 total
818-188C
Warning: Speed Hazard
On tongue near hitch;
1 total
818-339C
Warning: High Pressure Fluid Hazard
On tongue near hitch;
1 total
20301
20301
20301
818-188C Rev. C
Do Not exceed 20 mph maximum transport
speed. Loss of vehicle control and/or machine
can result.
To Prevent Serious Injury or Death:
EXCESSIVE SPEED HAZARD
WARNING
20301

3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 9
2019-03-08 Table of Contents Index 196-359M
818-579C (Option)
Warning: Pinch Point
On marker, two with single, four with dual marker option;
2 or 4 total
818-580C (Option)
Warning: Overhead Hazard
On marker, two with single, four with dual marker option;
2 or 4 total
818-398C
Caution: Tires Not A Step
Above all sets of tires;
6 total
20306l
20306
20301
20301

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Important Safety Information 10
818-587C
Caution: General
On tongue near hitch;
1 total
838-426C
Caution: Pressure/Torque
On the rim of each tire;
12 total
20301
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read Owner’s Manual before using machine.
Stand clear when folding and unfolding markers.
Stand clear when raising and lowering machine.
Keep all safety shields and devices in place.
Keep hands, feet, and clothing away from
Never ride on machine.
Always lower or properly support machine
Escaping hydraulic fluid can cause serious
Review safety instructions with all operators
moving chains and sprockets.
BEFORE servicing.
818-587C Rev. B
injury.
annually.
CAUTION
20301

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Introduction 11
Introduction
Great Plains welcomes you to its growing family of new
product owners. Your 3-Section 40-Foot No-Till Drill has
been designed with care and built by skilled workers
using quality materials. Proper setup, maintenance, and
safe operating practices will help you get years of
satisfactory use.
Document Family
196-359M Operator Manuala(this document)
196-359P Parts Manual
Description of Unit
The 3N-4010F, 3N-4010HDF and 3N-4020F are pull-type
seeding implements outfitted with hydraulic drive
metering and no-till coulters for use in no-till or
minimum-till conditions.
The 3N-4010F has 10 Series, parallel-arm openers.
The 3N-4010HDF has 10HD (Heavy Duty) openers.
The 3N-4020F has 20 Series, side-depth-control
openers. All models fold for transport.
Models Covered by this Manual
10 Series Openers:
3N-4010F-481048 Rows, 10 inch/25cm
3N-4010F-647564 Rows, 7.5 inch/19cm
10HD (Heavy Duty) Series Openers:
3N4010HDF-481048 Rows, 10 inch/25cm
3N4010HDF-647564 Rows, 10 inch/19cm
20 Series Openers:
3N-4020F-481048 Rows, 10 inch/25cm
3N-4020F-647564 Rows, 7.5 inch/19cm
Intended Usage
Use the drill to seed production-agriculture crops only.
Do not modify the drill for use with attachments other
than Great Plains options and accessories specified or
recommended for use with the drill.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are
determined by facing the direction the machine will travel
while in use unless otherwise stated.
Paragraphs in this format present a crucial point of information
related to the current topic.
Read and follow the directions to:
- remain safe,
- avoid serious damage to equipment and
- ensure desired field results.
Paragraphs in this format provide useful information
related to the current topic.
a. This manual also covers seeding rate. There is no separate Seed Rate manual.
Figure 1
3N-40 Drill
28229
Figure 2
Left/Right Notation
20476
L
R

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Introduction 12
Using This Manual
This manual will familiarize you with safety, assembly,
operation, adjustments, troubleshooting, and
maintenance. Read this manual and follow the
recommendations to help ensure safe and efficient
operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Refer to Figure 3
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial number plate is
located on the front of the left hand side of the center
section as shown.
Record your drill model and serial number here for quick
reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Figure 3
Serial Number Plate
20270

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Preparation and Setup 13
Preparation and Setup
This section will help you prepare your tractor and drill for
use. Before using the drill in the field, you must hitch the
drill to a suitable tractor and level the drill.
Pre-Setup Checklist
1. Read and understand “Important Safety
Information” on page 1.
2. Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
3. Check that all grease fittings are in place and
lubricated. See “Lubrication” on page 113.
4. Check that all safety decals and reflectors are
correctly located and legible. Replace if damaged.
See “Safety Decals” on page 6.
5. Inflate tires to pressure recommended and tighten
wheel bolts as specified. “Appendix” on page 124.
Hitching
There are three hitch options (see page 118). Check that
the tractor and drill are compatible before hitching.
Crushing Hazard: You may be severely injured or killed by
being crushed between the tractor and drill. Do not stand or
place any part of your body between machines being hitched.
Stop tractor engine and set park brake before installing hitch
pins.
Refer to Figure 4
1. Use drill parking jack to raise or lower tongue as
needed. Hitch drill to tractor using a hitch pin of
adequate strength - minimum diameter 112in
(38mm).
2. Install a retaining clip on the hitch pin to prevent it
from working up.
3. Securely attach drill safety chain to tractor drawbar.
4. Lower tongue onto tractor drawbar with jack.
Remove jack and store on tongue.
Make Electrical Connections
Make sure tractor is shut down with accessory power off
before making connections. Connections include:
5. Lighting
6. Veris controller harness
7. Electric Clutch (Point Row) harness (2 connectors)
8. Shaft monitor (option)
Figure 4
Hitching Tractor to Drill
20273

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Preparation and Setup 14
Make Hydraulic Connections
High Pressure Fluid Hazard:
Only trained personnel should work on system hydraulics!
Escaping fluid under pressure can penetrate skin, causing
serious injury. Avoid the hazard by relieving pressure before
disconnecting hydraulic lines. Use a piece of paper or
cardboard, NOT BODY PARTS, to check for leaks. Wear
protective gloves and safety glasses or goggles when working
with hydraulic systems. If an accident occurs, seek immediate
medical attention from a physician familiar with this type of
injury.
Hydraulic Circuit Connections
Refer to Figure 5
Great Plains hydraulic hoses are color coded handle
grips to help you hookup hoses to your tractor outlets.
Hoses that go to the same remote valve are marked with
the same color.
To distinguish hoses on the same hydraulic circuit, refer
to the symbol molded into the handle grip. Hoses with an
extended-cylinder symbol feed cylinder base ends.
Hoses with a retracted-cylinder symbol feed cylinder rod
ends.
The drill has three or four hydraulic circuits. The standard
circuits power drive/locks, lift, and fold. If markers are
present, they require a fourth circuit (or an additional
selector valve sharing the fold circuit).
If the tractor has only one circuit rated for continuous
flow, reserve it for the hydraulic drive.
1. Shut down tractor hydraulics.
2. Connect the hydraulic drive circuit.
3. Connect remaining circuits.
4. Check hose routing to ensure adequate slack for link
arm movement, and clearance from pinching or
abrading drill components.
Refer to Figure 6
5. If the drill is to be unfolded, set the selector valve to
Locks (handle to drill center). Valve is located near
rear end of left tongue tube.
Current Style Color Coded Hose Handles
Figure 5
Color Coded Hose Handles
31733
Hose Color Hydraulic Function
Gray Fold
Blue Lift
Green Marker Cylinders (Option)
Yellow Hydraulic Drive and
Wing and Swivel Locks
The drive is compatible only with closed center, PC (pressure
compensated) closed or LS (load sensing) hydraulic systems.
Do not use an open center system.
Figure 6
Hitching: Drive/Lock Selector Valve

3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Preparation and Setup 15
2019-03-08 Table of Contents Index 196-359M
Older Style Hoses with Color Ties
Refer to Figure 7
To distinguish hoses on the same hydraulic circuit, refer
to plastic hose label. The hose under an
extended-cylinder symbol feeds a cylinder base end.
The hose under a retracted-cylinder symbol feeds a
cylinder rod end.
.
Hose Color Hydraulic Function
White Fold
Blue Lift
Orange Marker Cylinders (Option)
Yellow Hydraulic Drive and
Wing and Swivel Locks
Figure 7
Plastic Hose Label
817-348c
17641
The drive is compatible only with closed center, PC (pressure
compensated) closed or LS (load sensing) hydraulic systems.
Do not use an open center system.

2019-03-08 Table of Contents Index 196-359M
3N-4010F, 3N-4010HDF, and 3N-4020F Table of Contents Index Preparation and Setup 16
Initial Setup
The following items need to be done for first use, and
some need to be re-done if the tractor changes.
Initial Tractor Setup
Veris Controller
The standard Veris hydraulic drive, controller module
and DICKEY-john radar are factory-installed on the drill.
The Veris console needs to be installed in the tractor
prior to first use. It includes suction cup feet that can
support the console on glazing for extended periods.
Route the power lead to a +12Vdc source. Route the
harness to the hitch, allowing enough slack for hitch
movement and any tractor articulation.
Refer to Figure 8
Mount the console where the display is visible during
planting, but does not obstruct vision of tractor or drill
systems, and does not impair safe highway transport.
Installation instructions are found in an included Veris
manual. Additional copies are available at:
www.veristech.com
Expanded operating information from that manual is
found in this manual, starting on page 34.
Once the console is installed, you can enter the initial
setup data by stepping through the calibration sequence
but not actually operating the motor. See page 38.
Moving Chain Hazard
Pinch/Crush Hazard
Shaft Entanglement Hazard:
Be careful when working around drill while tractor is running.
Any movement detected by the radar gun (Figure 9) can
activate the Veris hydraulic drive causing motion of chains,
sprockets, shafts and seed meters.
Vision Hazard:
The DICKEY-john RVS II radar speed sensor is an intentional
radiator of RF energy. Although its radiated energy level is far
below the limits set by EN 61010-1: 1993\A2: 1995 - Chapter
12.4, it is advisable not to look directly into the face of the unit.
The radar must radiate toward the ground and at least 20 cm
(8 inches) away from a human during use to comply with the
RF human exposure limits per FCC 47 CFR Sec. 2.1091.
DO NOT mount or use the radar in a manner inconsistent with
its defined use.
Figure 8
Veris Controller
28326
Figure 9
DICKEY-john Radar
20310