Grizzly Panther T10001 User manual

Specifications
Overall Size ................... 281⁄2"W x 101⁄2"D x 71"T
Shelf Size .................................281⁄4"W x 101⁄4"D
Number of Shelves ............................................ 5
Inventory Qty
A. Support Bracket ........................................ 8
B. Nut ............................................................ 56
C. Bolt ........................................................... 56
D. Rail ............................................................. 4
E. Shelf ........................................................... 5
F. Foot ............................................................ 4
Assembly
After unpacking your Model T10001 shelving unit,
perform an inventory of the parts. You will need
a #3 Phillips screwdriver and a 10mm wrench to
assemble the shelves.
Begin by loosely assembling the shelf unit with
the supplied nuts and bolts. Attach one side of
the rails, then the other, making sure that the
shelves are parallel to one another as shown in
the illustration on Page 2. Once the shelf unit is
assembled, attach the feet and place it upright on
a flat level surface, then tighten all of the bolts.
MODEL T10001
5 Shelf Unit
INSTRUCTION SHEET
If you need help with your new item, call our Tech
Support at: [phone].
COPYRIGHT © SEPTEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TJ9998 PRINTED IN CHINA







T10001 Parts Breakdown and List












T10001 Parts List
REF PART # DESCRIPTION
1 PT10001001 SUPPORT BRACKET
2 PSN02M SQUARE NUT M6-1
3 PS68M PHLP HD SCR M6-1 X 10
4 PT10001004 RAIL
5 PT10001005 SHELF
6 PT10001006 FOOT
7 PT10001007 COMPLETE HARDWARE BAG