Grizzly T27946 User manual

For questions or help with this product contact Tech Support at [phone] or [e-mail]
MODEL T27946
4-DRAWER ROLLING
TOOL CABINET
INSTRUCTIONS
COPYRIGHT © MAY, 2017 BY GRIZZLY INDUSTRIAL, INC., REVISED MAY, 2017 (KB)
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 05/17) #JH18537 PRINTED IN CHINA
Introduction
The Model T27946 4-Drawer Rolling Tool Cabinet
requires some assembly. Follow the instructions
below for assembly, operation, and maintenance.
Inventory Qty
• Tool Cabinet with Drawers ........................... 1
• Keys ............................................................. 2
• Fixed Casters .............................................. 2
• Swivel Casters w/Brake ............................... 2
• Slot Head Screws M8-1.25 x 12 ................ 16
• Flat Washers 8mm .................................... 16
• Lock Washers 8mm ................................... 16
Figure 1. Model T27946.
• To reduce risk of crushing injuries from
tool cabinet tipping over on you:
— Do not stand on cabinet or in drawers.
— Only open one drawer at a time.
— Only move or transport cabinet with all
drawers closed and locked.
• Do not exceed weight capacities:
— Max individual drawer weight limit
is 200 lbs.
— Max total tool cabinet weight limit
(including contents) is 800 lbs.
• To prevent accidental rolling, always lock
caster brakes after moving cabinet.
• Do not allow children to have unsupervised
access to cabinet.
V2.05.17
Assembly
The Model T27946 comes with two fixed casters
and two swivel casters with brakes.
To install casters:
1. With help from another person, lay cabinet
upside down on floor (see Figure 2).
Note: We recommend sweeping the floor
clean and laying down a piece of cardboard
or a blanket to prevent scratching the finish
during this step.

-2- T27946 Tool Cabinet (Mfd. 05/17)
Maintenance
• Use a soft, clean cloth and soapy water (use
regular dish soap) to remove grease, dirt, or
oil. Do not use solvents or flammable clean-
ing liquids.
• Lubricate drawer slides as needed with dry
lubricant.
• Lubricate lock annually with graphite.
Removing & Installing Drawers
To remove a drawer:
1. Fully extend drawer and remove contents.
2. Push left locking tabs (see Figure 4) down
and hold, then pull right locking tabs up and
hold.
Note: Each drawer features two guides per
side.
3. Remove drawer from drawer slide, (see
Figure 4).
The drawers can be removed and re-installed if
necessary.
Figure 4. Location of drawer locking tabs.
Drawer
Runner
4. To re-install drawer, extend drawer slides out
all the way, insert drawer runners into slides,
and close drawer entirely. Locking tabs will
click in place as drawer is closed, which will
fully attach drawer to slides.
Locking Drawers
Use the included keys to secure the drawers.
Drawers will only lock when completely closed.
Locking Tabs
Locking Caster
Two casters can be locked to keep tool cabinet
from moving.
To lock caster, press down on caster lock tab (see
Figure 3). To unlock caster, press down on caster
unlock tab.
Figure 3. Location and operation of caster lock
(1 of 2).
Caster Lock
Lock Tab
Unlock
Tab
2. Attach each caster using (4) M8-1.25 x 12
slot head screws, (4) 8mm flat washers, and
(4) 8mm lock washers (see Figure 2).
Ensure swivel casters with brake are mount-
ed on the same short side of the cabinet, and
fixed casters are mounted on opposite side,
then return cabinet to upright position.
Figure 2. Installing caster wheels on base.

T27946 Tool Cabinet (Mfd. 05/17) -3-
Parts Breakdown & List
1
2V2
3
4
5
6
7
9
8
10
11
12
13
14
15
18
17 16
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT27946001 CABINET BODY 10 PT27946010 LOCK W/2 KEYS
2V2 PT27946002V2 CASTER, LOCKING V2.05.17 11 PT27946011 TOUCH-UP PAINT, GLOSSY BLACK
3 PT27946003 DRAWER SLIDE 20" 12 PT27946012 TOUCH-UP PAINT, RED
4 PT27946004 DRAWER 6" 13 PT27946013 WARNING LABEL
5 PT27946005 DRAWER HANDLE 14 PT27946014 QR CODE LABEL
6 PT27946006 DRAWER HANDLE CAP 15 PT27946015 GRIZZLY.COM LABEL, GOLD
7 PT27946007 DRAWER LINER 16 PT27946016 SLOT HD SCR M8-1.25 X 20
8 PT27946008 FLAT HD SCR M4-.7 X 8 17 PT27946017 LOCK WASHER 8MM
9 PT27946009 CASTER, NON-LOCKING 18 PT27946018 FLAT WASHER 8MM
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call [phone] or visit our online parts store at www.grizzly.com to check for availability.
Grizzly Cabinet Series
T27947 T27952 T27951
T27948
T27953
T27950T27949
The T27946 4-Drawer Rolling Tool Cabinet is part of our heavy-duty 10-piece storage set. These modular
cabinets will enhance storage and workspace in the shop or garage, and they can be mixed and matched
to create a variety of storage solutions.