Growatt Shine GPRS-F User manual

Growatt Shine GPRS-F
Quick Installation Guideline
[phone] F [phone]
E service@ W www.growatt.comginverter.com
Step2.
Step1. SIM card installation
Remove the rubber plug, and loss the screws.Open the cover,
and take out the PCB board, and insert the SIM card.Put the
PCB back to the cover, tighten the screw, and put back the
rubber plug.
Note: 1. If the Shine GPRS-F module with SIM card, no need above
operation.
2. No touch of other components during operation.
For more info, please download from http://server.growatt.com
Plug Shine GPRS-F into the WiFi/GPRS port.
Connect Shine GPRS-F Device with the Inverter
Scan the QR code below to download ShinePhone, also you can
search ShinePhone in iOS or Google Play Store, download and
install it.
Note: 1. Make sure you download the latest version;
2. For further information please visit server.growatt.com.
【Android&iOS】
Registration and adding device
Step3. 1. Open ShinePhone APP, click “Register” on login page.

4.Scan or input the Shine GPRS-F barcode and checkcode, then click “Register”, after register succeed, it will
move you to the “my plant” page.
2. Select country and city, then click “Next” enter next page.
Note: If you select a wrong country and city, the system
time maybe wrong.
3.Fill out the required information, then click “Next”, it
will guide you to the “Add datalogger” page.
5. In “my plant” page, select the inverter in the device list to check the inverter update
information.
6.If you want to add/edit/delete/configure a datalogger, click the “+” sign on the right top side of the “my plant”
page. There are 4 options in the dialog window when push on the datalogger’s serial number, click the one you need.
Note:1) After add Shine GPRS-F to server account, it will automatic communicate with Growatt server, you can
remove the when it turns from flash every 0.2 sec to flash
every 1 sec,
2) If want change Shine GPRS-F to a new account, delete it from previous account first, then add it to
new account.
3) If want to set Shine GPRS-F to factory settings, remove the rubber plug, and press the KEY button for
6 sec until blue LED always ON.
4) If want to restart Shine GPRS-F, short press the KEY button.
rubber plug on the KEY button to check the blue LED,
mean communication OK.