Growatt ShineWiFi-X User manual

1
Growatt ShineWiFi-X/-S WIFI setup through AP mode
Before setup, please make sure the customer’s home modem/router is working at 2.4GHz.If you
are unsure about whether the modem/router is working at 2.4GHz or 5GHz, please confirm with
the internet provider first.
1. If the dongle has a RS232 communication port, please find its LED indicator, reset button
and barcode as pictures shown below and go to step 3. If the dongle has a USB
communication port, please go to step 2.
Open the rubber cap and
find KEY hole, both LED
indicator and reset button
are inside of it.
The bar code is on
the back of the
dongle, where the
serial number and
the check code can
be found.

2
2. If the dongle has a USB communication port, please find its LED indicator, QR code and
reset button as pictures shown below.
LED indicator
QR Code
Reset Button

3
3. If the color of the LED indicator is either green or red, please short push the reset button
to make it become solid blue; if the light is solid blue, please move on to the next step.
4. Open the WiFi setting on the smartphone and choose the WiFi network generated by the
WiFi dongle. The network name is the same as the serial number of WiFi dongle.
Connect to dongle’s
WIFI network

4
5. Open a web browser on your phone such as the Safari or Chrome, input 192.168.10.100
in the address bar and visit it. In the welcome page, enter admin as the username and
12345678 as the password and log in.

5
6. Find and click on Wireless Router Setting from the toolbar on the left side of the page.
7. On the right side of the page, please choose Manual in terms of WiFi Mode, manually
input the home WiFi name and password in WiFi Name Input and WiFi Password boxes
respectively and click Apply. Please note they are case sensitive.

6
8. Click on Restart Immediately
9. Please check the color of the LED indicator on the WiFi dongle. If it is flashing blue, that
means the inverter has been successfully connected to the home WiFi network.
10. Follow the quick installation guide coming with the WiFi dongle to register a ShinePhone
account and to scan the QR code to add the dongle to the account.
Contact details
Growatt New Energy Australia Pty Ltd
Address: C1, 27-29 Fariola Street, Silverwater, NSW 2128
T: 1800 476 928
M: 0423 487 311
Whatsapp: growattnewenergyau
Website: www.ginverter.com.au
Email: [email protected]