Growatt ShineLink-X Operating and maintenance instructions

Growa ShineLink – X
Quick Installaon Manual
SOLSOL s.r.o.
Králova 298/4, Brno 616 00, Czech Republic
[email protected]
www.solsol.cz
For more info, please download from hp://server.growa.com
Telephone: [phone]
Fax: [phone]
e-mail: [e-mail]
website: www.growa.com

Step 1: Unpacking
Unpack the box and take out ShineLanBox, ShineRFSck-X, and other accessories according
to the following list:
Step 2: Electrical connecon
1. Rotate the USB cover of the photovoltaic device counterclockwise
2. Rotate the datalogger locker upside down and make sure the triangle is on the front side
and in the middle.
3. Connect the datalogger to the inverter‘s USB port, make sure the triangle is on the front
side, press the locker, and rotate clockwise unl it is ghtened.
Item
Name
Quanty
A
ShineLanBox
1
B
ShineRFSck-X
1
C
Network cable
1
D
Power adapter
1
E
Fixing screws
4
F
Wall plasc posts
2
G
User manual
1
Turn the triangle up and center,
then turn the lock clockwise

Aer the installaon, if the LED light of ShineRFSck-X ashes quickly, it means that the
installaon works. If the LED light is o, please recheck the connecon between ShineRFSck
and the inverter.
ShineRFSck -x’s LED status
Status of the ShineRFSck-X
Always on
The ShineRFSck-X is inialing
Always o
Lost connecon
Flashing quickly (every 0.2 second)
USB port found the inverter
Flashing slowly (every 1 second)
The connecon is working
ShineLanBox Electrical Connecon
Connect the ShineLanBox’s RJ45 port to the router, then connect the ShineLanBox with a
power adapter.
Aer inializaon of the ShineLanBox, the power LED is on, the network LED is on and the
device LED is ashing frequently.
If the power LED is on, it means that it is connected to the power supply.
If the network LED is on, it means that the ShineLanBox is connected to the internet.
If the device LED ashes, it means that the device works.
The number of ashing mes means the number of RF.
ShineLanBox LED lights
Status of working condion
Power light
If the light is on, it means that the power is on
Web light
Flashing means that it connected to router
Device light
The number of ashing means the number of devices connected to the
ShineLanBox
Paired light
Flashing when pairing, it turns o if the pairing has been successful
Item
Name
Descripon
A
Power input
Connected to the power
adapter
B
RS 485
Resaved
C
RJ 45
Connected to the network
D
Key
Funcon key
E
Conguraon LED
Conguraon of the device
F
Device LED
Device number is connected
G
Network LED
Connecng to the network
H
Power LED
Connecng to the power

Step 3: Use ShineLink-X
You can go to the Google Store or App Store to nd “Shinephone” or scan the QR code below to
install the soware.
Note:
1. Make sure you install the newest version.
2. For more informaon please visit server.growa.com
2. Aer installing the ShinePhone app, click on log in, and then click on register, and then enter your
county and city.
3. Based on your locaon choose the country and city, please noce wrong input will lead to wrong
uploading, click next to the register page.

4. Fill in all the customer informaon and click next to go to the add datalogger page
5. Scan or type in the bar code on the ShineLanBox, click register, and then it will automacally switch
to the My Plant page.

6. On the My Plant page, you can monitor all the devices to check solar device informaon
7. On the My Plant page, you can monitor all the devices to check solar device informaon
Note: aer you successfully add the datalogger, you can see the ShineLanBox’s condions, if you
cannot nd ShineLanBox please check the status of the LED light to nd out the problem:

Tip 1: Add new ShineRFSck device
Note:
Only aer reseng ShineLanBox or adding a new ShineRFSck-X, you need to pair ShineLanBox and
ShineRFSck-X, all the devices will be paired by the manufacturer.
Quick press ShineRFSck-X (in less than 2 seconds), then quickly press ShineLanBox’s buon, you can
enter pairing mode, at this point, the ShineLanBox’s pairing light is ashing, ShineRFSck-X ’s Blue
light is ashing quickly if the pairing is successful, ShineLanBox’s pairing light is o, ShineRFSck-X
’Blue web light change to slow ashing. (the light is on for one second, and o for a second.)
Note: The longest connecon distance between ShineLanBox and ShineRFSck-X should be no more
than 200 meters, if there is a wall between ShineLanBox and ShineRFSck-X the longest connecon
distance is 50 meters, if there
are two walls between ShineLanBox and ShineRFSck-X the longest connecon distance is 20 meters.
Tip 2: Reset ShineLanBox
Purpose of reseng collector:
(1 ) Erase all the pairing records
(2 ) ShineLanBox IP changes to Automac
Steps of reseng collector:
Press the ShineLanBox buon for more than 6 seconds, unl all four LED lights are on, then release
the buon, at this me all the sengs have been erased. Aer reseng because of the need to
repair ShineLanBox and ShineRFSck-X, please refer to Tip 1 above.