Growatt ShineWiFi-X User manual

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 1
Growatt monitoring
device setup guidance
JABOR

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 2
Monitoring Devices Overview
Safety
Shinewifi-X
•USB port, for TL-X series
•Tricolor indicating light (RGB)
•Reset button underneath
•QR code
•Bar codes at the back
Shinewifi-S
•RS232 port, for other types of
inverter with RS232 port
•Tricolor indicating light (RGB)
inside the rubber cap
•Reset button inside the
rubber cap
•Bar codes at the back
They both only compatible with 2.4Ghz Wi-Fi.
5Ghz and 2.4&5 Ghz combined in one wifi signal are not compatible.

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 3
Safety
Both Shinewifi-X and Shinewifi-S have the same indicator
information
1. Flashing Red
•the initial state of the configuration
2. Solid Blue
•Dongle is launching hotspot, waiting to use AP mode method
3. Flashing Blue
•Dongle has been connected to router
4. Solid Green
•Failed connection, network not 2.4ghz.
•Or wrong Wi-Fi name or password in AP method
•Wi-Fi signal is too weak
5. Flashing Green
•Dongle is connected to router, but router has no internet
Indicators on the dongle

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 4
Multiple
Color
Flashing
Red
Solid Blue
Shinephone
configuration
Solid Green
Fail
Hold
Single tap
Flashing Blue
Succeed
AP mode
method
Single tap
Hold
Release
Indicators on the dongle

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 5
Shinephone App registration
Before opening the Shinephone
App, make sure your mobile device
is connected to the 2.4Ghz Wi-Fi.
Before you begin, please make
sure that the dongle‘s light is
red flashing.

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 6
Please use your own email address as username
Enter the same email address again
Installer code can leave as blank
Shinephone App registration

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 7
Please enter ‘my plant’
Enter the exact date of installation
Open the permission to get the
address on the phone and select
add automatically. The following
information about the address will
be filled in automatically
Fill in the inverter rated power
Australia Time Zone
From GMT +7 to GMT +10
Check the state first

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 8
For Shinewifi-X, scan the QR to get SN and CC.
Shield the sunlight, aimed at scanning code.
For Shinewifi-X, scan the Bar code at back to get SN and CC.
The serial number on the inverter is different from that of the dongle.
Please add the dongle’s serial number
Shinephone App configuration

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 9
When making sure your phone is connected to a
2.4ghz network, only the first option can be
choosing.
Please don't try the second way.
Shinephone App configuration

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD －Powering Tomorrow 10
After the phone is connected to the 2.4ghz network,
the Wi-Fi name is automatically filled in the blank.
Please fill in the correct password for Wi-Fi, and pay
attention to case sensitivity
Shinephone App configuration