hager Dream User manual

www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualied
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, re or other hazards.
Function
Blind cover for electrical installations in buildings.
Correct use
- For the ush-mounted installation in standard wall boxes.
- Only suitable for use in indoor areas with no drip and no spray water.
Blank plate
Hager Dream Installation manual

2
Information for electricians
Installation
DANGER!
Touching live parts can result in an electric shock.
An electric shock can lead to death.
Disconnect the connecting cables before working on the device and
cover all live parts in the area!
ç
Preparing the device for installation
Cover
1
Notches
Carefully loosen the cover on the notches with a at-blade screwdriver. Lift up and
remove the cover (1).
Installing the device into the wall box
2
Fix the device with the two screws attached into the wall box (2).

3
Assembling the cover
Cover
3
Place the cover in the correct position and snap it onto the device (3).
2-5gang frames are available for multiple combinations.