Haverland ULTRAD User manual

INSTRUCTION MANUAL
[e-mail]
HAVERLAND
The rst self-programmable radiator
and control from anywhere in the world
APP

2
Thank you for choosing Haverland radiators
When installed and programmed in accordance with these instructions the new generation
of Haverland electric radiators will provide exceptional comfort and energy savings.
Index
1. Safety Notes ......................................................................................
2. Introduction ........................................................................................
2.1 Features ........................................................................................
2.2 Panel controls / Display ................................................................
3. Instructions for installation ..................................................
3.1 Important ........................................................................................
3.2 Safety measures .............................................................................
3.3 Instructions .....................................................................................
4. Initial Operation ..............................................................................
4.1 YOUR HEATER IS CONFIGURED! .................................................
4.2 Operating modes ...........................................................................
4.3 Adjusting the temperatures (Comfort and Eco) ..............................
4.4 ‘Open Window’ Function ..............................................................
4.5 ‘Lock’ Function .............................................................................
4.6 Standby ..........................................................................................
4.7 Adjusting Day and Time .................................................................
4.8 Other Indications ............................................................................
4.8.1 Heating Element ON Indicator ....................................
4.8.2 Sensor Indicator On ....................................................
5. Battery ....................................................................................................
6. Maintenance ......................................................................................
7. Smartbox (not supplied) ..........................................................
Guarantee ..................................................................................................
3
4
4
4
5
5
5
6
8
8
10
11
13
13
13
14
15
15
15
15
15
15
16

3
Safety Notes
• Please read these instructions carefully.
• To disconnect mains power from the radiator remove the plug from the wall socket, but
never pull on the cable.
• Do not leave the mains cable in contact with the radiator when it is switched on.
• During operation, the radiator must be kept well away from combustible materials, such
as curtains, carpets and furniture etc.
• DO NOT COVER THE RADIATOR. DO NOT USE TO DRY CLOTHES.
If it is covered, there is a risk of overheating.
• CAUTION: If the mains power cable is damaged, it must be replaced by the
manufacturer, its after-sales service or similarly qualied persons, in order to prevent any
danger.
• If the radiator is to be installed in a bathroom, it must be positioned so that it
cannot be touched by anybody in the bath or shower.
• The radiator must not be installed below or in front of a mains socket.
• When the radiator is disposed of, the requirements established by current legislation on
waste processing and recycling must be taken into account.
• The installation should be carried out with consideration to the manufacturer’s
instructions and in accordance to the relevant National Wiring Regulations BS7671.
• It is very important that the radiator has a good Electric Earth connection.
• The radiator should be installed so that its mains plug is always accessible.
• This radiator cannot be ush-mounted with a wall. Safety distances should always be
respected.
• The radiator is tted with a block so that children cannot change the programming.
• This unit is not designed to be handled by persons (including children) with physical,
sensory or mental handicaps, with little experience or knowledge, unless they are under
the supervision of an adult responsible for their safety with the instructions on its use.
Children must always be supervised to ensure they do not play with the unit.
• Children under three should be kept well away from the heater unless they are
continually supervised.
• Children between three and eight should only switch the unit o or on, providing it is
positioned or installed in its nal operating location, and be supervised or have received
instructions on how to use the unit in a safe manner and understand the risks involved.
• Children between three and eight must not plug in, adjust or clean the heater or carry
out any maintenance operations.
• This unit may be used by children older than eight and by persons with physical,
sensory or mental handicaps, with little experience or knowledge, provided they have
been duly trained and are supervised by an adult who understands the risks involved.
Cleaning and maintenance shall be performed by adults not children. Children must not
play with the unit.
• CAUTION: Certain parts of this product can become very hot and cause burns.
Special attention should be paid when children and other vulnerable persons are present.
• CAUTION: Keep bags and other accessories well away from children.
• Do not touch the external parts of the radiator when it is operating.
• It is quite normal that, with the rst switch-on, the unit produces a ‘new’ smell. Allow
your heater to operate in a well-ventilated place for two or three hours.
• Before the rst switch-on for the winter or when the heater has not been used for
several days, the unit should be cleaned (follow the steps given in the ‘maintenance
section’). This cleaning operation will avoid burning accumulated dust and other debris.
1

4
• This radiator can operated with external programmable controllers or any other exterior
control device.
• The convection eect, together with other ambient factors, can cause discolouration to
metal surfaces and plastics.
• Temperature dierences can cause crackling and other noises in the unit. This does not
indicate any failure in the radiator.
• This radiator heater is lled with a precise amount of special oil that does not need any
maintenance.
• The regulations on discarding oil when the heater is being disposed of must be
observed.
• The warranty for the radiator does not cover any damage caused by failing to read
these instructions.
Introduction
2.1 Features
•YOU DO NOT HAVE TO PROGRAMME YOUR RADIATOR! Ultrad will programme
itself automatically.
•Its presence sensor and algorithms continually monitor your lifestyle habits and
control your electricity consumption at all times, especially for your comfort.
• Ultrad has four operating modes, ‘learning’, sensor, programming (via Smartbox -
not included) and manual.
• Open window detection function; if you leave a window open, the radiator will
switch itself o to prevent energy wastage.
2.2 Panel controls / Display
2
1Temperature indicator:
•Red = Comfort
• Blue = Anti-frost
•Green = Economy
2Operation mode indicator:
•Flashing = ‘Learning’ mode
•Fixed = Sensor mode
• O = Manual mode or ‘Forced’
programming mode (with Smartbox
(not included)
3‘Forced’ programming mode (via Smartbox
App - not included)
4Sensor indicator
5Heating On
6Decrease
7Increase
8 Display. You can see:
•On room temperature or
•Desired temperature
9Standby
1
2
3
4
5
9
678

5
Instructions for installation
3.1 Important
• In order to optimise presence detection of your radiator, do not install it in a
‘dead’ angle or behind a piece of furniture.
• The radiator must never be installed just below a mains socket.
• Take into account the radiator location so that it can detect presence over
the largest possible area of the room.
• The presence sensor will not detect any movement if the distance to the
radiator exceeds ve metres.
• Remember that the sensor will detect the movement of pets.
• DO NOT PLACE ANY OBJECTS IN FRONT OF OR ANYWHERE NEAR
THE SENSOR.
3.2 Safety measures
To avoid problems, it is necessary to keep a minimum distance of 15 cm
between the radiator and any combustible material.
3
50 cm
15 cm
5 m

6
3.3 Instructions
It is vital that the radiator is axed rmly to a solidly constructed and levelled wall.
Make sure that an electrical socket is near where you intend to position the radiator.
A cardboard template is supplied to ensure the correct height and positioning of the
radiator brackets.
The four holes in the pattern indicate the precise positions to drill and insert the Rawlplug
to x the mounting brackets.
Once xed to the wall it is important to check and ensure the security of the brackets to
support the weight of the radiator.
Place the template on the oor
(follow the instructions on the template)
and mark the 4 points onto the wall.
Take out the 4 Rawlplugs (8 mm) from the bag, the 4 long screws and the two 6 x
50 mm screws.
Drill four 8 mm diameter holes as marked on the wall and insert the four x 8 mm
Rawlplugs.
Refer to cardboard
template in the box
In bathrooms, the radiator
must never be installed
where the switches and
other devices may be within
the reach of someone in the
shower or bathtub.
1

7
5
To ax the radiator rmly to the brackets: screw down FULLY the 6 x 50 mm
screws in the upper part of the brackets (diagram 5).
Make sure that the radiator is xed rmly to the wall to avoid future risk, before
connecting the plug into a nearby power supply socket.
After securely mounting the radiator as described, insert the 13 Amp moulded plug
into a 13 Amp socket outlet.
Alternatively, ask your electrician to ‘hard wire’ to a fused connection spur on the
main ring circuit.
4 SCREWS
2 SCREWS
M6 x 50 mm
23
Attach the 2 brackets using
the 4 long screws.
Place radiator over lower
tang of the brackets.
45
Place over top tang
and lower gently
into position.
The two 6 x 50 mm
screws supplied
should be fully
screwed down to
lock the radiator
onto the brackets.
Check that the
radiator is securely
xed to the wall to
avoid any risk.
6

8
Initial Operation
4.1 YOUR RADIATOR IS CONFIGURED!
Your radiator is now ready to learn your lifestyle habits and provide heat WITHOUT ANY
NEED FOR FURTHER PROGRAMMING.
12
= COMFORT TEMP (20 ºC)
‘AUTOMATIC
TEST
= ECONOMY TEMP (16 ºC)
4
20
‘ROOM TEMP’
Plug-in
3 pin 13 amp
plug
Press
switch
34
5IFthere is detection
6
> 30 MIN
= ANTI-FROST TEMP (5 ºC)
7
> 12 H
IFthere is NO detection
IFthere is NO detection

9
Note: You can change the Comfort and Economy temperatures (see point 4.3, Adjusting
the temperatures).
• Depending on your presence, Ultrad will learn a
template for each day of the week, week by week.
•Ultrad NEVER stops learning. If you change your
habits of getting up and going to bed etc, the unit will
reprogramme itself to adapt to your new habits.
Factory-set parameters:
• Clock and current day are factory set.
• Comfort temperature = 20 ºC.
• Economy temperature = 16 ºC.
• Activated operating mode = ‘Learning’ mode.
• Activated working prole in ‘Learning’ Mode = Economic Prole ‘PE’.

10
4.2 Operating modes
Your radiator incorporates four operating modes.
THE ‘LEARNING’ MODE IS ACTIVATED AT THE FACTORY.
4.2.1 To change the operating mode:
Simultaneously press and every
time you want to change the operating mode.
Light indicator ‘Operating mode’ will change:
1) ‘Learning’ mode: ‘slowly ashing’ light.
2) Manual mode: light is OFF.
3) Sensor mode: xed light.
4) ‘Forced’ programming mode (via Smartbox
App - not included).
1) LEARNING MODE (factory activated):
During seven days and CONTINUOUSLY, week by week, your radiator will learn your
lifestyle.
The radiator has 2 working proles:
•Economic Prole ‘PE’ (Default factory settings):
This prole prioritises the ENERGY SAVINGS.
• If there is detection = Comfort mode.
• If there is no detection > 30 minutes = Economy mode.
• If there is no detection > 12 hours = Anti-frost mode.
• Comfort prole ‘PC’:
This prole prioritises comfort and welfare.
• If there is detection = Comfort mode.
• If there is no detection > 30 minutes = Economy mode.
• If there is no detection > 16 hours = Anti-frost mode.
Day by day, the radiator ‘learns’ the presence (comfort) periods and the absence periods
(economy).
After 7 days, the radiator will start working according to the programmed presence
periods (comfort) and the absent periods (economy), depending on the chosen working
prole.
Operating
mode
light

11
The comfort periods in the following week will commence before the programmed time
so that the room will begin warming up before you enter.
Note: The auto-programming period is continuous. The radiator updates according
to your life style variations, day by day, week by week.
2) SENSOR MODE :
• If there is detection = Comfort mode.
• If there is no detection > 30 minutes = Economy mode.
The thermostat does NOT hold anything in memory.
3) MANUAL MODE :
In this mode, you decide when you want Comfort, Economy or Anti-frost.
When Manual mode is selected, you only have to choose Comfort, Anti-frost or Economy
and the desired room temperatures.
4.3 Adjusting the temperatures
In order to change the Comfort and Economy temperatures the radiator must be in
MANUAL mode (see point 4.2).
The factory-set temperatures are:
• COMFORT TEMPERATURE = 20 ºC
• ECONOMY TEMPERATURE = 16 ºC
• ANTI-FROST TEMPERATURE = 5 ºC
Note: The anti-frost temperature (5 ºC) cannot be changed.
The operating temperature is shown in colours light ‘temperature indicator’:
Comfort and economy temperatures may be modied (the anti-frost temperature is xed).
Temperature
indicator
- Red = Comfort
- Blue = Anti-frost
- Green = Economy

12
Change the comfort and economy temperatures
The radiator must be in MANUAL MODE (see point 4.2).
1. Select the temperature to be changed, comfort, anti-frost or economy, pressing button .
2. Press button . The adjusted temperature will ash for several seconds.
3. Press either of buttons and repeatedly to change the temperature.
IMPORTANT :
• The comfort temperature range is from 18 to 28 ºC.
• The maximum economy temperature is 18 ºC.
• The economy temperature can NEVER be higher than the comfort temperature.
• The economy temperature is always 4 ºC less than the assigned comfort temp.
Temperature
indicator
- Red = Comfort
- Blue = Anti-frost
- Green = Economy

13
4.4 ‘Open Window’ Function
The radiator incorporates this automatic function.
If, in the room in which the radiator is installed, the room temperature falls by more than
4 ºC, the heater will change over to ‘Anti-frost’ mode’.
Notes:
• This will prevent heater operation.
• The unit will automatically commence operation when somebody enters
the room.
• This function cannot be deactivated.
4.5 ‘Lock’ Function
To activate the locking function, touch
simultaneously the buttons and
To deactivate the locking function, touch
simultaneously the buttons and
4.6 Standby
To switch the heater on and o press .
5
The screen and the pilot lights
go out.
A light spot appears on the
right side of the display.
ON = 1 sound bit.
OFF = 2 sound bits.
A light spot appears on the left
side of the display.

14
4.7 Adjusting Day and Time
Your radiator is supplied with the clock and day of the week already factory set.
You must adjust the clock for changes between summer and winter times; this is an
automatic setting if you have the Smartbox (not included).
Press and buttons.
A ‘d’ will appear on the display. Wait.
Then a number from 1 to 7 will appear
ashing to indicate the day of the week. Wait.
Adjust the day of the week by pressing
or . Wait.
‘h’ is displayed. Wait.
Then, the value indicating the hours will ash.
Adjust the hours using and . Wait.
Then, ‘n’ appears on the screen. Wait.
Then, the value indicating the minutes will ash:
Adjust the minutes using or . Wait.
Straight away, the working prole will appear and show the learning mode ‘PE’,
‘Economy Prole’.
On the ‘Economy’ PE, the energy savings is prioritised, while on the Comfort Prole
‘PC’ it prioritises your comfort (please, read page 10).
To set up the prole using or . Wait.
Then, to nalise, the approximate room
temperature appears.
d
2
h
15
n
57
pE
1
2
3
4

15
4.8 Other Indications
4.8.1 Heating Element ON Indicator:
When the radiator is operating, pilot lamp 5 will be on.
4.8.2 Sensor Indicator On:
When the sensor is operating, pilot lamp 4 will be on.
Battery
Your radiator is tted with a long-life lithium battery.
When the battery is replaced, the day of the week and the time have to be re-set (see
point 4.7); this is an automatic setting if you have the Smartbox (not included).
Maintenance
Ultrad does not need any special maintenance.
Dust with a dry, soft cloth when the radiator is disconnected and cold.
It is best to clean the surface of the radiator at the beginning of the heating season
(always before connecting it).
NEVER USE SOLVENTS OR ABRASIVE PRODUCTS.
Smartbox (not supplied)
• Wherever you are, you can remotely control your radiator.
• Program your radiator using Haverland’s App.
• 3G Wi control in the palm of your hand.
• Contact your distributor or email [email protected]
5
4
5
6
7

16
Haverland UK Limited
Challenge House, Sherwood Drive, Bletchley, MK3 6DP
Customer Service Telephone: [phone]
Fax: [phone]
Email: [email protected]o.uk
www.haverland.co.uk