Hisense HK900A User manual

1
HK900A/B SERIES POS SYSTEM
USER MANUAL
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
8
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
1
All manuals and user guides at all-guides.com
all-guides.com

2
Notes
☆It is required grounded well and the supply voltage shall be stable, and you must confirm that the voltage
of the outlet provides shall be in line with the voltage marked on the label of the unit.
☆Be sure not to sprinkle liquid or fall any object into the unit.
☆Be sure not to keep heavy, strenuous movement, shake & heavy strike away from the POS.
☆Do notswitch on or off the host frequently, because it is easy to result in damage on the machine.
☆Be sure not to unplug or plug in any live part or external device when they are in energized state, and the
connecting cables of the POS between parts shall be connected securely.
☆Be sure neither to lengthen cable nor to replace parts at your will, if you have any demand, please contact
with the reseller.
☆The unit shall be used under dry, ventilated & clean environment away from sunlight.
☆Avoid to making the air vent of the host machine blocked or covered
☆If any liquid sprinkles or any sundry falls into the unit, please shut it down immediately & switch off
power supply, take batteries down, dry the liquid or remove the sundry. If you take the batteries down, you
shall reset CMOS.
☆In case of safety fault, such as peculiar smell, abnormal sound, leakage and other faults, you must switch
off the power supply at once and then contact with reseller.
☆When inserting USB flash or disk, you shall kill virus to prevent the host machine from virus.
☆The RJ11 port at the back of the host is connected with the cash drawer, as it is not a communication port,
users shall not use the port for dial-up networking.
☆The product is a Level A one, it may cause radio interference in living environment. In such case, users
may need to take practical & feasible measures against the interference.
☆When the POS is not in use, you shall switch off power supply and cover dust guard.
The
The
The
The manufacturer
manufacturer
manufacturer
manufacturer has
has
has
has the
the
the
the right
right
right
right to
to
to
to modify
modify
modify
modify contents
contents
contents
contents of
of
of
of the
the
the
the instruction
instruction
instruction
instruction book
book
book
book but
but
but
but without
without
without
without prior
prior
prior
prior
announcements!
announcements!
announcements!
announcements!
Warning:
Warning:
Warning:
Warning:
1. Static may damage to the integrated circuit in the host machine.
2. If a replaced battery is not right, this may cause explosion or serious damage.
Must replace the same type of batteries or similar ones recommended by the
manufacturer
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
2
All manuals and user guides at all-guides.com

3
Table
Table
Table
Table of
of
of
of Contents
Contents
Contents
Contents
1.
1.
1.
1. Packing
Packing
Packing
Packing List..........................
List..........................
List..........................
List.............................................................................................................
...................................................................................
...................................................................................
........................................................................................
.....
.....
......4
.4
.4
.4
2.
2.
2.
2. System
System
System
System View..................
View..................
View..................
View............................................................................................................
..........................................................................................
..........................................................................................
................................................................................................
......
......
...... 4
4
4
4
2.1
2.1
2.1
2.1 System
System
System
System graphic
graphic
graphic
graphic model
model
model
model......................................................................................
......................................................................................
......................................................................................
............................................................................................
......
......
...... 4
4
4
4
2.2
2.2
2.2
2.2 S
S
S
System
ystem
ystem
ystem Dimension
Dimension
Dimension
Dimension............................................................................................
............................................................................................
............................................................................................
..................................................................................................
......
......
...... 5
5
5
5
2.3
2.3
2.3
2.3S
S
S
System
ystem
ystem
ystem angular
angular
angular
angular adjustment
adjustment
adjustment
adjustment.............................................................................
.............................................................................
.............................................................................
...................................................................................
......
......
...... 5
5
5
5
3.
3.
3.
3. System
System
System
System Assembly
Assembly
Assembly
Assembly &
&
&
& Replacement
Replacement
Replacement
Replacement...............................................................................5
...............................................................................5
...............................................................................5
...............................................................................5
3.1
3.1
3.1
3.1 System
System
System
System a
a
a
assembly
ssembly
ssembly
ssembly drawing...................................................................................
drawing...................................................................................
drawing...................................................................................
drawing......................................................................................
...
...
...5
5
5
5
3.2
3.2
3.2
3.2 host
host
host
host machine
machine
machine
machine Replacement
Replacement
Replacement
Replacement.....................................................................................6
.....................................................................................6
.....................................................................................6
.....................................................................................6
3
3
3
3.
.
.
. 3
3
3
3MSR
MSR
MSR
MSR Replacement...............
Replacement...............
Replacement...............
Replacement.......................................................................
........................................................
........................................................
.............................................................
.....
.....
...........
......
......
........
..
..
...
.
.
..............
.............
.............
.............7
7
7
7
3
3
3
3.4
.4
.4
.4 HDD
HDD
HDD
HDD Replacement....................
Replacement....................
Replacement....................
Replacement.................................................
.............................
.............................
.....................................................
........................
........................
.........................................
.................
.................
.........................
........
........
........8
8
8
8
3
3
3
3.5
.5
.5
.5 Memory
Memory
Memory
Memory Replacement.......................
Replacement.......................
Replacement.......................
Replacement......................................................
...............................
...............................
.............................................
..............
..............
.......................
.........
.........
.......................
..............
..............
..............10
10
10
10
4.
4.
4.
4. Specifications..............
Specifications..............
Specifications..............
Specifications..................................................................................................
....................................................................................
....................................................................................
................................................................................................
............
............
..............11
..11
..11
..11
4.1
4.1
4.1
4.1 HK900A
HK900A
HK900A
HK900A Specifications
Specifications
Specifications
Specifications (D525)
(D525)
(D525)
(D525) ..............................................................
..............................................................
..............................................................
..........................................................................
............
............
..............11
..11
..11
..11
4.2
4.2
4.2
4.2 HK900B
HK900B
HK900B
HK900B Specifications
Specifications
Specifications
Specifications (H61)
(H61)
(H61)
(H61) .......................................................
.......................................................
.......................................................
..........................................................
...
...
...........
........
........
.................
.........
.........
...........11
..11
..11
..11
5.
5.
5.
5. I/O
I/O
I/O
I/O Ports
Ports
Ports
Ports............
............
............
...................................................................................
.......................................................................
.......................................................................
...................................................................................
............
............
.....................................12
.........................12
.........................12
.........................12
5.1
5.1
5.1
5.1 HK900A
HK900A
HK900A
HK900A I/O
I/O
I/O
I/O Ports.............................................................
Ports.............................................................
Ports.............................................................
Ports.........................................................................
............
............
.....................................12
.........................12
.........................12
.........................12
5.2HK900B
5.2HK900B
5.2HK900B
5.2HK900B I/O
I/O
I/O
I/O Ports.........
Ports.........
Ports.........
Ports..................
.........
.........
..............................................................
.....................................................
.....................................................
........................................................
...
...
............................12
.........................12
.........................12
.........................12
Appendix
Appendix
Appendix
Appendix A
A
A
A:
:
:
: Drivers
Drivers
Drivers
Drivers Installation
Installation
Installation
Installation..................................................
..................................................
..................................................
......................................................
....
....
.................
.............
.............
.................
....
....
.................13
.............13
.............13
.............13
Appendix
Appendix
Appendix
Appendix B.
B.
B.
B. sample
sample
sample
sample C++
C++
C++
C++ cash
cash
cash
cash drawer
drawer
drawer
drawer code
code
code
code for
for
for
for DOS
DOS
DOS
DOS....................
....................
....................
......................
..
..
..............
............
............
................
....
....
.................13
.............13
.............13
.............13
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
3
All manuals and user guides at all-guides.com

4
1.
1.
1.
1. Packing
Packing
Packing
Packing List
List
List
List
a
a
a
aSystem (with stand and cable cover)
b
b
b
bDriver CD
c
c
c
cPower adapter
d
d
d
dPower cord
2.
2.
2.
2. System
System
System
System View
View
View
View
2.1
2.1
2.1
2.1 System
System
System
System graphic
graphic
graphic
graphic model
model
model
model
【Front
Front
Front
Front View
View
View
View】
【Back
Back
Back
Back View
View
View
View】
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
4
All manuals and user guides at all-guides.com

5
2.2
2.2
2.2
2.2 S
S
S
System
ystem
ystem
ystem Dimension
Dimension
Dimension
Dimension
2.3
2.3
2.3
2.3S
S
S
System
ystem
ystem
ystem angular
angular
angular
angular adjustment
adjustment
adjustment
adjustment
3.
3.
3.
3. System
System
System
System Assembly
Assembly
Assembly
Assembly
3.1
3.1
3.1
3.1 System
System
System
System a
a
a
assembly
ssembly
ssembly
ssembly drawing
drawing
drawing
drawing
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
5
All manuals and user guides at all-guides.com

6
3.2
3.2
3.2
3.2 host
host
host
host machine
machine
machine
machine Replacement
Replacement
Replacement
Replacement
Step1: unscrew the hand screw
Step2: host machine move along the arrow, then separate the host machine and base.
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
6
All manuals and user guides at all-guides.com
all-guides.com

7
3.3MSR
3.3MSR
3.3MSR
3.3MSR Replacement
Replacement
Replacement
Replacement
S
tep1: unscrew the screw
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
7
All manuals and user guides at all-guides.com

8
Step2：unplug the MSR cable, then Replacement the MSR
3.4
3.4
3.4
3.4 HDD
HDD
HDD
HDD Replacement
Replacement
Replacement
Replacement
Step1: unscrew the screw
MSR cable
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
8
All manuals and user guides at all-guides.com

9
Step2: remove the HDD cover along the arrow
Step3: unscrew the hand screw, unplug the HDDcable, then remove
the HDD along the
arrow
HDDcable
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
9
All manuals and user guides at all-guides.com

10
3.5Memory
3.5Memory
3.5Memory
3.5Memory Replacement
Replacement
Replacement
Replacement
Step1: unscrew the seven screw
Step2: remove the memory as shown.
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
10
All manuals and user guides at all-guides.com

11
4
4
4
4 Specifications
Specifications
Specifications
Specifications
4.1
4.1
4.1
4.1 HK900A
HK900A
HK900A
HK900A Specifications
Specifications
Specifications
Specifications (D525)
(D525)
(D525)
(D525)
Item
Item
Item
Item D
D
D
Description
escription
escription
escription
CPU
CPU
CPU
CPU Support
Support
Support
Support Socket Type FCB GA8 package
CPU Type DC（D525）
Memory
Memory
Memory
Memory
Socket type 1*204Pin SO-DIMM Socket
Memory type DDR3 667/800MHz；1G ，Up to 4GB
Peripherals
Peripherals
Peripherals
Peripherals
RJ11 connector Cash Drawer Connector，12V supported
PCIE 1*MINI PCIE
SATA 2*SATA Port，SATA power port
LAN1 10/100/1000M
LAN2 10/100M
LPT 1*Standard LPT Port
COM 6*COM, COM3-4 support 5V/12V/RI setting
USB Port 9*USB，6 I/O interface，3port header
LVDS Port 1*LVDS Port（24BIT）
VGA Port 1*DB15 VGA Port+ 1 Header 2*5pin
PS/2 1*PS/2 connector（K/B）
HDD 2.5 inch 250G SATA hard disk driver
LCD SIZE 15” TFT LCD
Touch screen type 5 wire resistive
MSR 3 tracks MSR/I-button/IC smart card/RFID card
Consumer display 7” or 15” TFT LCD
E
E
E
Environment
nvironment
nvironment
nvironment Operation temperature 0~40℃
POWER +12V DC INPUT
4.2
4.2
4.2
4.2 HK900B
HK900B
HK900B
HK900B Specifications
Specifications
Specifications
Specifications (H61)
(H61)
(H61)
(H61)
Item
Item
Item
Item D
D
D
Description
escription
escription
escription
CPU
CPU
CPU
CPU support
support
support
support CPU Type Socket LGA1155 support intel 2&3 core i7/i5/i3
pentium/Celeron CPU
Memory
Memory
Memory
Memory
Socket type 1*204Pin SO-DIMM Socket
Memory type Support DDRIII 1066/1333/1600MHz memory，up to 8GB
Peripherals
Peripherals
Peripherals
Peripherals
RJ11 connector Cash Drawer Connector，12V supported
PCIE 1*MINI PCIE
SATA 2*SATA Port，SATA power port
LAN 10/100/1000M
LPT 1*Standard LPT Port
USB Port 4*USB，1*USB pin
LVDS Port 1*LVDS Port（24BIT）
VGA Port 1*DB15 VGA Port+ 1 Header 2*5pin
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
11
All manuals and user guides at all-guides.com
all-guides.com

12
I/O expand port 1*I/O expand port
PS/2 1*PS/2 connector（K/B）
HDD 2.5 inch 250G SATA hard disk driver
LCD SIZE 15” TFT LCD
Touch screen type 5 wire resistive
MSR 3 tracks MSR/I-button/IC smart card/RFID card
Consumer display 7” or 15” TFT LCD
E
E
E
Environment
nvironment
nvironment
nvironment
Operation temperature 0~40℃
POWER +12V DC INPUT
5
5
5
5 I/O
I/O
I/O
I/O Ports
Ports
Ports
Ports
5.1HK900A
5.1HK900A
5.1HK900A
5.1HK900A I/O
I/O
I/O
I/O Ports
Ports
Ports
Ports
5.2HK900B
5.2HK900B
5.2HK900B
5.2HK900B I/O
I/O
I/O
I/O Ports
Ports
Ports
Ports
LPT COM1 COM2 LAN COM 5 COM 4
PS/2 12V IN 12VOUTVGA USB AUDIO USB COM 3
CASH DRAW
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
12
All manuals and user guides at all-guides.com

13
Appendix
Appendix
Appendix
AppendixA
A
A
A:
:
:
: Drivers
Drivers
Drivers
Drivers Installation
Installation
Installation
Installation
The shipping package includes a Driver CD in which you can find every individual driver and utility
that enables you to install the drivers on the system.
After install the operation system successfully, please insert the Driver CD into the drive and install the
driver:
HK900A (D525) need to install the “Chipset”, “VGA”, “Audio”. “LAN” driver.
HK91XA (H61) need to install the “Framework”, “DirectX9C”, “INF”, “Graphics”, “ME”, “Audio”,
“LAN” driver.
Appendix
Appendix
Appendix
Appendix B.
B.
B.
B. sample
sample
sample
sample C++
C++
C++
C++ cash
cash
cash
cash drawer
drawer
drawer
drawer code
code
code
code for
for
for
for DOS
DOS
DOS
DOS：
// Borland C++3.1 + DOS6.22
//HS-525TD
const int BASE_HS-525TD = 0x1180;
#ifndef byte
#define byte unsigned char
#endif
#ifndef Sleep
#define Sleep(x) delay(x)
#endif
//Initialization（Initialized when the program starts, do not always need to initialize）
void InitHS-525TD(void)
{
byte by = inportb(BASE_HS-525TD + 0x01);
by = by
| 0x60;//bit5,bit6
outportb( BASE_HS-525TD + 0x01, by);
by = inportb(BASE_HS-525TD + 0x05);
by = by
| 0x20;//bit 5 input
by = by & 0xBF; //bit 6 output
outportb( BASE_HS-525TD + 0x05, by);
}
//OpenDrawer
int OpenDrawer()
{
byte by = inportb(BASE_HS-525TD + 0x0D);
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
13
All manuals and user guides at all-guides.com

14
by = by & 0xBF;
outportb( BASE_HS-525TD + 0x0D, by); //bit6
Sleep(200);
by = inportb(BASE_HS-525TD + 0x0D);
by = by
| 0x40;
outportb( BASE_HS-525TD + 0x0D, by);
return 1;
}
//CheckDrawerStatus 1:close ；0:open;
int CheckDrawerStatus()
{
byte by = inportb(BASE_HS-525TD + 0x0D); //bit 5
if( by & 0x20 )
iRes = 1;
else iRes = 0;
}
Australia Sole Administration Office
Tel: [phone] Email: [email protected]Aumei INTL(Australia) Pty. Ltd.
Address: Level 23, HWT T
.AUMEIWORLD.COM , 40 City Road, Southbank, VIC, 3006, Australia WWW ower
14
All manuals and user guides at all-guides.com