Hoist Fitness MC-7027 User manual

Fax
[phone]
[phone]
Customer Service
[phone]
RECORD SERIAL NUMBER HERE
MACHINE CODE
MC-7027
CHIN-UP STATION
Note: Both Serial Number and Model Number are Required when Ordering Parts
OWNER'S MANUAL
A01

ABBREVIATIONS...................................................................
OWNER'S MANUAL
PAGE 01 MC-7027 ASSEMBLY
LIMITED WARRANTY............................................................
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
CONTENTS
02
04
07
08
09
10
11
12

OWNER'S MANUAL
PAGE 02MC-7027 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

OWNER'S MANUAL
PAGE 03 MC-7027 ASSEMBLY
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

OWNER'S MANUAL
PAGE 04
MC-7027 ASSEMBLY
FRAME ASSEMBLY

*
MC-7011
24
*
24
18
18
22
318
22
MC-7015
18
*
OWNER'S MANUAL
PAGE 05 MC-7027 ASSEMBLY
MC-7018, OR MC-7019
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
ITEMS INCLUDED WITH THE MC-7017,

24
18
23
18
2
22
18
8
18
24 9
3
MC-7012
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
MC-7027 ASSEMBLY PAGE 06
*IMPORTANT*
NOW THAT THE MC-7027 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. IF NOT,
IT WILL BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE FRAME
AND RETIGHTEN BOLTS.

OWNER'S MANUAL
PAGE 07 MC-7027 ASSEMBLY
- WRENCH TIGHTEN HARDWARE.
NOTE:
PRE-ASSEMBLY
17
13
11
10
19
11
11
11
21
17
3
5
1
14
10
17
24
14
21
4
4
17
10
24
21
17
12
20
10 17
5
21
21
15
6
7
17
19 13
20
6
21
11
1
10
16
5
7
4
21
5
4
4

25
26
25
27
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
MC-7027 ASSEMBLY PAGE 08

DECAL REFERENCE
OWNER'S MANUAL
PAGE 09 MC-7027 ASSEMBLY
SERIAL # DECAL
021-0003627
021-0003427