Hoist Fitness MC-7021 User manual

Fax
[phone]
[phone]
Customer Service
[phone]
RECORD SERIAL NUMBER HERE
MACHINE CODE
MC-7021
HEAVY BAG STATION
OWNER'S MANUAL
Note: Both Serial Number and Model Number are Required when Ordering Parts
A02

OWNER'S MANUAL
PAGE 01 MC-7021 ASSEMBLY
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
LIMITED WARRANTY............................................................
CONTENTS
02
04
08
09
10
11
12
13

OWNER'S MANUAL
PAGE 02MC-7021 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

OWNER'S MANUAL
PAGE 03 MC-7021 ASSEMBLY
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

OWNER'S MANUAL
PAGE 04
MC-7021 ASSEMBLY
FRAME ASSEMBLY

OWNER'S MANUAL
PAGE 05 MC-7021 ASSEMBLY
MC-7018, OR MC-7019.
REMOVED FOR CLARITY.
- SOME PARTS MAY HAVE BEEN
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
PARTS INCLUDED WITH THE MC-7017
18
18
20 18
1
20
18
*
*
*
MC-7015
MC-7011
22
22

18
11
20
18 1
22
5
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
MC-7021 ASSEMBLY
OWNER'S MANUAL
PAGE 06

11
MC-7012
21
18
22 18
2
18
22
20
18
18
20
5
18
22
12
11
NOTE:
FOR INSTALLATION OF THE HEAVY
BAG, SEE THE MC-7033 MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
PAGE 07 MC-7021 ASSEMBLY
*IMPORTANT*
NOW THAT THE MC-7021 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR.
IF NOT, IT WILL BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO
RE-ALIGN THE FRAME AND RETIGHTEN BOLTS.

OWNER'S MANUAL
MC-7021 ASSEMBLY PAGE 08
NOTE:
- WRENCH TIGHTEN HARDWARE.
PRE-ASSEMBLY
7
15
22 16 16 25
16
22 7
7
7
14
3
8
22
16
16
25
6
17
22
10
4
13
95
14

PAGE 09
OWNER'S MANUAL
MC-7021 ASSEMBLY
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
24
23
23