Hoist Fitness CF Commercial Freeweight CF-3661-A User manual

Fax
[phone]
[phone]
Customer Service
[phone]
RECORD SERIAL NUMBER HERE
MACHINE CODE
Note: Both Serial Number and Model Number are Required when Ordering Parts
OWNER'S MANUAL
Note: Both Serial Number and Model Number are Required when Ordering Parts
B00
OWNER'S MANUAL
B00
CF-3661-A
INCLINE LEVERAGE ROW
CF-3661-A
INCLINE LEVERAGE ROW
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.

02
04
11
12
13
14
16
17
18
20
21
22
23
24
EXERCISE LOG......................................................................
OWNER'S MANUAL
PAGE 01 CF-3661-A ASSEMBLY
LIMITED WARRANTY............................................................
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
CONTENTS

Be sure to have your serial number and this manual when calling. When all
OWNER'S MANUAL
PAGE 02CF-3661-A ASSEMBLY
parts have been accounted for, continue on.
Level
Tape Measure
Rubber Mallet
Adjustable Wrench
1/2", 9/16" and 3/4" Sockets
Ratchet Wrench
Two People
Hex Key Wrench Set
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
INSTRUCTIONS

CF-3661-A ASSEMBLY
OWNER'S MANUAL
PAGE 03
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

FRAME ASSEMBLY
CF-3661-A ASSEMBLY
OWNER'S MANUAL
PAGE 04

40*
4
43*
30
30
3
30
40
43
30
7
3
29
42
22
7
4
34
29
22
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- WRENCH TIGHTEN HARDWARE.
* HAND TIGHTEN HARDWARE.
FRAME ASSEMBLY
NOTE:
OWNER'S MANUAL
PAGE 05 CF-3661-A ASSEMBLY
STEP 2
STEP 3
STEP 1

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
OWNER'S MANUAL
CF-3661-A ASSEMBLY PAGE 06
6
30
30
39
3
19
43

39 30
8
30 43
6
NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 07 CF-3661-A ASSEMBLY

38
30
2
43
30
43
30
9
30
37 5
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY
OWNER'S MANUAL
CF-3661-A ASSEMBLY PAGE 08

NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 09 CF-3661-A ASSEMBLY
30
43
2
38
30
3

1
3
28
31
33
6
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
OWNER'S MANUAL
CF-3661-A ASSEMBLY PAGE 10
*IMPORTANT*
NOW THAT THE CF-3661-A IS COMPLETELY ASSEMBLED TAKE TIME TO ASSURE THAT YOUR
UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. IF NOT, IT WILL BE NECESSARY
TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE FRAME AND RETIGHTEN BOLTS.

32
7
32
41
36
12
30
25
23
12
32
15
26
27
14
20
28
9
13
6
35
10
24
28
14
11
10
13
11
17
17
14
14
35
16
15
18
35
10
10
35
21
32
15
18
5
10
43
2
PRE-ASSEMBLY
OWNER'S MANUAL
PAGE 11 CF-3661-A ASSEMBLY

50
4544
4846
48
47
49
49 46
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUALOWNER'S MANUAL
PAGE 12CF-3661-A ASSEMBLY

DECAL REFERENCE
PAGE 13
OWNER'S MANUAL
CF-3661-A ASSEMBLY
021-0003230
SERIAL # DECAL
021-0003341
021-0003008
021-0003228
021-0003135
021-0003221

ITEM NO. PART NUMBER DESCRIPTION QTY.
1 022-01PD2112-A CHEST PAD ASSEMBLY 1
2 026-01X3530 DOUBLE PIVOT 1
3 026-01X3716 UPRIGHT, CENTER 1
4 026-01X3717 FOOT ASSEMBLY 1
5 026-01X3720 HANDLE ASSEMBLY 1
6 026-01X3721 FRONT UPRIGHT ASSEMBLY 1
7 026-01X3731 UPPER FOOTPLATE MOUNT 1
8 026-01X3928 ARM REST 1
9 026-01X6508 ARM ASSEMBLY 1
10 011-0411001 SET SCREW: 1/4"-28 X .25" LG. (SS) 8
11 014-0012014 BEARING: FLANGELESS - 25mm I.D. 4
12 014-0012018 SNAP RING - 25mm EXTERNAL 4
13 016-0001003 END CAP 1.50" X 2.50" (BLACK) 2
14 026-01M0932 ALUMINIUM CAP: Ø1.25" ID 4
15 026-01M0933 ALUMINUM RING: Ø1.25" ID 4
16 026-01M2381 SHAFT .984" X 2.9400 LG. 2
17 026-01PL0235-17 GRIP OPEN ENDED 1.188" X 5.00" LG. 2
18 026-01PL0235-36 OPEN END GRIP: Ø1.188" X 8.25" LG. 2
19 026-01PL2122-B OVAL-SHAPED RUBBER FOOT 4
20 026-01PL2135 END PLUG 1.66" 1
21 026-01PL2246 DUAL HOLE BUMPER 2.05" THICK 1
22 026-01PL2298 FOOTPLATE 4
23 026-01PL2313 WEIGHT HORN RUBBER DONUT W/ 3.750 COPE 1
24 026-01PL2337 STOPPER 1.75" X .70" LG. 1
25 026-01PL2519 PLASTIC SCUFF GUARD 11.05" LG. WITH RIVETS 1
26 026-01PL2523 WEIGHT HORN SLEEVE 1
27 026-01PL2554 SLOTTED HDPE TUBE 1.9000" OD X 1.6300" ID X 6.6250" 1
28 013-1002010 5/16" SAE FLAT WASHER (Ni) 6
29 013-1002007 3/8" X 22mm FLAT WASHER (Ni) 32
30 013-1002006 1/2" X 27mm SAE FLAT WASHER (Ni) 26
31 013-1010003 5/16" INTERNAL LOCK WASHER (Ni) 4
32 013-1006003 3/8" SPLIT LOCK WASHER (Ni) 4
33 011-0701004 5/16"-18UNC X 1.25" BHCS (Ni) 4
34 011-0701019 3/8"-16UNC X .75" BHCS (Ni) 16
35 011-0701021 3/8"-16UNC X 1.25" BHCS (Ni) 4
PART LIST
PAGE 14
OWNER'S MANUAL
CF-3661-A ASSEMBLY
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED

PART LIST CONTINUED
PAGE 15
OWNER'S MANUAL
CF-3661-A ASSEMBLY
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO. PART NUMBER DESCRIPTION QTY.
36 011-0116180 5/16"-18UNC X 2.50" LOW HEAD SHCS (Ni) 1
37 011-0116108 1/2"-13UNC X 1.25" LOW HEAD SHCS (Ni) 2
38 011-0116119 1/2"-13UNC X 4.00" LOW HEAD SHCS (Ni) 2
39 011-0116121 1/2"-13UNC X 4.50" LOW HEAD SHCS (Ni) 4
40 011-0116123 1/2"-13UNC X 5.00" LOW HEAD SHCS (Ni) 4
41 012-0504006 5/16"-18UNC THIN NYLOCK NUT (Ni) 1
42 012-0504005 3/8"-16 UNC THIN NYLOCK NUT (Ni) 16
43 012-0504002 1/2"-13 UNC THIN NYLOCK NUT (Ni) 14
44 021-0003008 DECAL COMMERCIAL MAINTENANCE 1.50 X 6.69 1
45 021-0003135 DECAL WARNING 1.50" X 6.69" 1
46 021-0003221 DECAL HOIST 2.50" X 9.13" 2
47 021-0003228 DECAL 600 LB. WEIGHT RATING 1.6250" X 1.6250" 1
48 021-0003230 DECAL HOIST 1.625" X 6.0613" 2
49 021-0003341 DECAL PINCH POINT 1.07" X 2.13" (HORIZONTAL) 2
50 SERIAL # DECAL DECAL HOIST SERIAL # 1.63" X 2.63" 1

ABBREVIATIONS
BZ = Black Zinc
Ni = Nickel Plated
SS = Stainless Steel
WZ = White Zinc
SHCS = Socket Head Cap Screw
BHCS = Button Head Cap Screw
FHCS = Flat Head Cap Screw
OWNER'S MANUAL
PAGE 16
Head Cap Screw
CF-3661-A ASSEMBLY
SHSS = Socket Head Shoulder Screw
Low Head SHCS = Low Head Socket
HHB = Hex Head Bolt

0"0" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/4" 2 1/2" 2 3/4" 3" 3 1/4" 3 1/2" 3 3/4" 4" 4 1/4" 4 1/2" 4 3/4" 5" 5 1/4" 5 1/2"
3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/4" 2 1/2" 2 3/4" 3" 3 1/4" 3 1/2" 3 3/4" 4" 4 1/4" 4 1/2" 4 3/4"
BOLT SIZING CHART
OWNER'S MANUAL
PAGE 17 CF-3661-A ASSEMBLY
1/2" HHB
RECOMMENDED
TORQUE RANGE:
60-75 ft-lbs
3/8" HHB
RECOMMENDED
TORQUE RANGE:
24-30 ft-lbs
5/16" HHB
RECOMMENDED
TORQUE RANGE:
14-17 ft-lbs
1/4" HHB
RECOMMENDED
TORQUE RANGE:
6-8 ft-lbs
1/4" BHCS
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
5/16" BHCS
RECOMMENDED
TORQUE RANGE:
11-15 ft-lbs
3/8" BHCS
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
1/2" BHCS
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
1/4" FHCS
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
3/8" FHCS
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
1/2" FHCS
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
3/8" SHCS
RECOMMENDED
TORQUE RANGE:
39-49 ft-lbs
5/16" SHCS
RECOMMENDED
TORQUE RANGE:
23-29 ft-lbs
1/4" SHCS
RECOMMENDED
TORQUE RANGE:
11-14 ft-lbs
1/4"
LOW HEAD
SHCS
RECOMMENDED
TORQUE RANGE:
4-6 ft-lbs
5/16"
LOW HEAD
SHCS
RECOMMENDED
TORQUE RANGE:
9-12 ft-lbs
3/8"
LOW HEAD
SHCS
RECOMMENDED
TORQUE RANGE:
18-23 ft-lbs
1/2"
LOW HEAD
SHCS
RECOMMENDED
TORQUE RANGE:
40-50 ft-lbs
1/4" SHSS
RECOMMENDED
TORQUE RANGE:
3-4 ft-lbs
5/16" SHSS
RECOMMENDED
TORQUE RANGE:
8-10 ft-lbs
3/8" SHSS
RECOMMENDED
TORQUE RANGE:
17-22 ft-lbs

013-0002003
1/4"
FLAT WASHER
SMALL, SAE, 13mm
013-0102026
1/2"
FLAT WASHER
LARGE, USS, 34mm
014-0018001
1/2" LONG
SPACER
3/8" FENDER WASHER
013-0003002
PLASTIC 1 1/16"
026-01PL151
FENDER WASHER
013-0402005
3/8"
FLAT WASHER
LARGE, USS, 25mm
013-0002004
3/8"
FLAT WASHER
SMALL, SAE, 21mm
013-0102020
3/8"
LOCK WASHER
1" SHIM WASHER
016-0009003
013-0102019
1/4"
LOCK WASHER
026-01M0238
2" ALUMINUM
FLATHEAD CAP
013-0102028
3/8"
CURVED WASHER
013-0102004
5/16"
FLAT WASHER
LARGE, USS, 22mm
013-0402007
3/8"
FLAT WASHER
22mm O.D.
1 1/16"
013-0003004
FENDER WASHER
014-0018002
1" LONG
SPACER
013-0102003
1/2"
FLAT WASHER
SMALL, SAE, 27mm
013-0102018
1/2"
LOCK WASHER
WASHER SIZING CHART
OWNER'S MANUAL
CF-3661-A ASSEMBLY PAGE 18

026-01M0211
1/4" LONG
FLANGED SPACER
026-01M0198
1/2" LONG
FLANGED SPACER
026-01M0760
1/2" LONG HEAVY
FLANGED SPACER
026-01M211T
1/4" LONG HEAVY
FLANGED SPACER
026-01M0532
11/16" LONG HEAVY
FLANGED SPACER
026-01M0551
1" LONG HEAVY
FLANGED SPACER
026-01M0788
.81" LONG HEAVY
FLANGED SPACER
026-01M0780
.65" LONG HEAVY
FLANGED SPACER
026-01M0761
1 11/16" LONG HEAVY
FLANGED SPACER
026-01M0789
.44" LONG HEAVY
FLANGED SPACER
026-01M0762
1 1/2" LONG HEAVY
FLANGED SPACER
026-01M0768
1 1/4" LONG HEAVY
FLANGED SPACER
026-01M0239
1 5/8" ALUMINUM
FLATHEAD CAP
026-01M0240
1 3/8" ALUMINUM
FLATHEAD CAP
026-01M0600
.625" LONG
FLANGED SPACER
WASHER SIZING CHART
(CONTINUED)
OWNER'S MANUAL
CF-3661-A ASSEMBLYPAGE 19