Home Styles 6801-57 User manual

Part List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
6801-57
Seating
A.
Back
1 pc.
D.
Frame
1 pcs.
B.
Seat
1 pc.
C.
Side
1 pc.
E.
Foot
4 pcs.
J.
Clip
1 pc.
Hardware List
6801-57 cartons are needed for assembly.Two
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
22 pcs. (+1 extra)
M6x35
Head Cap Bolt
22 pcs. (+1 extra)
Flat Washer
22 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach to Side (C) withunit
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
(See Figure 2)
Figure 1
Left Unit
STEP 1
Attach Seat (B) to Back (A) with Head Cap Bolts,
Spring Washers and Flat Washers,
tightening bolts only halfway.
(See Figure 1)
Figure 2
Flat Washer
Spring Washer
Head Cap Bolt
A
B
Head Cap Bolt
Spring Washer
Flat Washer
C

Assembly Instructions /37
STEP 3
Attach withFrame (D) to unit
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
Tighten all bolts used in Steps 1, 2 and 3.
STEP 4
Attach Feet (E) to unit
with Head Cap Bolts,
Spring Washers and Flat Washers.
(See Figure 3)
Figure 3
Flat Washer
Spring Washer
Head Cap Bolt
Head Cap Bolt
Spring Washer
Flat Washer
E
E
E
E
D

Assembly Instructions /47
Right Unit
STEP 5
Attach Seat (B) to Back (A) with Head Cap Bolts,
Spring Washers and Flat Washers,
tightening bolts only halfway.
STEP 6
Attach to Side (C) withunit
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
Flat Washer
Spring Washer
Head Cap Bolt
A
B
Head Cap Bolt
Spring Washer
Flat Washer
C

Assembly Instructions /57
STEP 7
Attach withFrame (D) to unit
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
Tighten all bolts used in Steps , 6 and 7.5
STEP 8
Attach Feet (E) to unit
with Head Cap Bolts,
Spring Washers and Flat Washers.
Flat Washer
Spring Washer
Head Cap Bolt
D
Head Cap Bolt
Spring Washer
Flat Washer
E
E
E
E