Home Styles 5094 941 User manual

Hardware List
Part List
For assembly see instructions in carton 5094 942.-
Kitchen Island
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
5094 941-
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
4 pcs. (+1 extra)
Cam Lock
4 pcs. (+2 extra)
Knob
8 pcs.
M4x20
Machine Screw
8 pcs.
Adjustable Pin
4 pcs. (+1 extra)
Flat Washer
4 pcs. (+1 extra)
Spring Washer
4 pcs. (+1 extra)
M6x35
Head Cap Bolt
16 pcs. (+1 extra)
M6x50
Head Cap Bolt (long)
4 pcs. (+1 extra)
A.
Top
1 pc.
F.
Foot
4 pcs.

Part List
Tool(s) required for assembly: Phillips screwdriver, Level
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Carton 5094 941 is also needed for assembly.-
Kitchen Island
5094 942-
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
B.
Rail
2 pcs.
C.
Side Panel
2 pcs.
E.
Post
2 pcs.
D.
Post
2 pcs.
G1.
Shelf
2 pcs.
H.
Door
2 pcs.
I.
Door
2 pcs.
J.
Shelf
1 pc.
K.
Base
1 pc.
L.
Stretcher
2 pcs.
Part List
G2.
Shelf
2 pcs.

Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened in future.
C
Cam Lock Screw
Figure 1
STEP 1
Remove drawer from Top (A).
Attach Knobs to drawer
with Machine Screws.
STEP 2
Insert Cam Lock Screws into pre-drilled holes in Side Panels (C),
then tighten. (See Figure 1)
C
A
Machine Screw
Knob

Assembly Instructions 3/6
Figure 2
STEP 3
Attach Side Panels (C) to Rails (B) with
Cam Locks. (See Figure 2)
C
C
B
B
Cam Lock
STEP 4
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A).
A

Assembly Instructions /46
E
D
L
L
D
E
Head Cap Bolt
STEP 6
Attach Shelves (G1) and (G2) to unit from Step 4.
Attach units from Step 5 to unit with Head Cap Bolts.
Head Cap Bolt
Figure 3
STEP 5
Attach Stretchers (L) to Posts (D) and (E)
with Head Cap Bolts. (See Figure 3)
G2
G1
G2
G1

Assembly Instructions /56
K
F
F
F
Head Cap Bolt
STEP 7
Attach Base (K) to unit with Head Cap Bolts.
Figure 4
Flat Washer
Spring Washer
Head Cap Bolt (long)
STEP 8
Attach Feet (F) to unit with
Flat Washers, Spring Washers
and Head Cap Bolts (long).
(See Figure 4)
F

Assembly Instructions 6/6
Figure 6
Figure 5
STEP 9
Turn unit over to its upright position.
Insert Adjustable Pins into side panels at desired level.
Place Shelf (J) into position.
Attach Doors (H) and (I) to unit by sliding door hinges into side panel hinges. (See Figure 5)
Attach Knobs to Doors (H) and (I) with Machine Screws. (See Figure 6)
Slide drawer into position.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 7)
Figure 7
Adjustable Pin
Knob
Machine Screw
H
I
H
I
J

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460