Honeywell LYNX Touch 7000 User manual

174-2760—1
TABLE OF CONTENTS
System Overview ........................................................................... 5
Features You Can Design into Your System ....... 5
Honeywell 7000 User Keypad Overview ............ 6
Honeywell 7000 Configuration ........................... 7
System Limitations ............................................. 8
Wireless Device Limitations ............................... 9
My System ........................................................................... 11
Quick Reference Chart ...................................... 11
Options I Have Selected .................................... 12
Custom and Special Protection
Modes I Have Selected ................................. 13
Passcodes I Have Selected ............................... 14
My Emergency Call List ..................................... 14
Standard Operation ........................................................................... 15
Overview ............................................................ 15
Standard Security Modes .................................. 16
Arming Your System When Leaving Home ........ 17
Disarming Your System ...................................... 18
Disarming Your System When Returning Home 18
Arming Your System When Staying Home ......... 19
Changing From One Arming Mode to Another .. 20
Force Arming Your System ................................. 21
Putting Your System in ON WATCH Mode ......... 22
Putting Your System in SYSTEM TEST Mode ... 23
Custom Operation ........................................................................... 25
Overview ............................................................ 25
Custom Security Modes ..................................... 25
Selecting a Custom Security Mode .................... 26
Special Protection .............................................. 26
Mode Configuration Chart.................................. 28
Pool Protection ................................................... 28
Latch Key ........................................................... 28
Telephone Access .............................................. 29
The Menu System ......................................... 29
Local Access ................................................. 29
Remote Access ............................................. 29
Remote Access Passcode ............................ 29
Arming and Disarming by Telephone ............ 30
Disabling Telephone Access ......................... 32
Automatic Lighting Modules ............................... 32
Automatic Lighting ............................................. 32

74-2760—1 2
Wireless Devices ........................................................................... 35
Wireless Key ...................................................... 35
Wireless Pendant ............................................... 36
Wireless Key and Wireless Pendant
Limitations ..................................................... 37
Security Options ........................................................................... 39
Bypass Option.................................................... 39
When to Use Bypass..................................... 39
Bypassing Points from the Keypad................ 40
Viewing Names of Bypassed Points.............. 41
Passcodes Option .............................................. 41
Changing Any Passcode (Including
Master Passcode) .................................... 42
Event Log Option ............................................... 43
Displaying Events .......................................... 44
Audible Option ................................................... 45
Quieting the Local Audible ............................ 45
Remote Access Option (Programming) ............. 46
General ......................................................... 46
Enabling Remote Access .............................. 46
Service Option ................................................... 47
Enabling Service Access .............................. 47
Help Screen Option............................................ 48
Changing the Help Screen Speed ................ 48
Set Date/Time Option ........................................ 49
Set Date/Time ............................................... 49
Emergency
Procedures ........................................................................... 51
Customer Service Center .................................. 51
Alarms ................................................................ 51
What To Do in the Event of Alarms ............... 51
Silencing Any Alarm ...................................... 52
Burglar Alarm ................................................ 52
Duress................................................................ 53
Sending a Duress Signal while Disarming .... 53
Fire Protection.................................................... 54
Your Honeywell Detectors Detect a Fire........ 54
Reporting a Fire Manually ............................. 54
Resetting Your System after a Fire Alarm ..... 55
Police Notification .............................................. 56
Calling for Police Help ................................... 56
Resetting Your System after a Police Alarm .. 56
Emergency Evacuation ...................................... 57
Making the Plan ............................................ 57
In the Event of a Fire Alarm .......................... 57
Resetting the System after an Emergency.... 57

374-2760—1
Technical
Information ........................................................................... 59
Custom Security Panel (Control Panel) ............. 59
California State Fire Marshal 24-Hour
Requirements ................................................ 59
System Testing ................................................... 60
Radio Frequency Transmitters ........................... 61
Troubleshooting ........................................................................... 63
Trouble Messages .............................................. 63
Power Failure ..................................................... 65
Emergency System Shutoff ............................... 65
Telephone Line Problems .................................. 66
Protected Opening Fault .................................... 66
Alarm and Trouble Sounds ................................. 67
Compliance with
Regulations ........................................................................... 69
Glossary of Terms ........................................................................... 71
Honeywell 7000
Limited Equipment
Warranty ........................................................................... 77

74-2760—1 4

574-2760—1
SYSTEM OVERVIEW
Features You Can Design into Your System
A typical system includes a control panel located in a closet or utility room, one or
more user keypads located in a hallway, bedroom, or an entry way, and various
sensors distributed at perimeter openings and key locations within the house. The
system is operated from the user keypad. The security sensors detect, alert, and
report abnormal conditions.The control panel synchronizes the functions of the
various devices.
Your system installation has been specifically designed to meet your security
requirements. A basic system can be further enhanced by increasing the extent of
protection (number of sensors) and the number of user keypad operating locations.
Each system is unique depending on the options you purchased. Your options can
include:
•Smoke and/or heat detectors to detect a fire outbreak.
•Remote point expander modules to add security capacity while simplifying the wiring.
•Wireless keys on your key chain that allow you to operate your system with the
simple push of a button.
•Emergency buttons to summon:
—Fire assistance.
—Police assistance.
—Special emergency aid such as medical assistance.
•Additional passcodes that let you grant use of your system to family members,
guests, and help without divulging your master code. Up to ten different codes can
be assigned; they can have temporary (one time) or unrestricted use. They can be
assigned varying authority so the users can have limited access to available
features of your system.
•Two partial arming features: force arming and bypassing let you selectively leave
some protected points disarmed while arming the rest of your system.
•Internal and external audible devices to alert and evacuate the inhabitants and
attract the attention of neighbors in the event of an emergency. The exterior audible
is briefly delayed to allow valid passcode holders to disarm the system in the event
of an inadvertent alarm.
•Special protection is available to separately safeguard important areas and objects
such as the intellectual property and valuable equipment in the home office, safe,
workshop, liquor cabinet, gun rack, etc.
•Pool protection is available that annunciates throughout the home that someone
has entered the pool area. It rings the exterior audible to attract the attention of
neighbors when you are away.
•System outputs can be used to operate remote displays and security-related
lighting.
•The Latch Key feature is available that tells the system to call your pager and let
you know that a specific person has disarmed your system.
•ATelephone Access feature may be added that will allow you to arm and disarm
the system from any touch tone telephone.
•The system can automatically operate lights when you enter and leave, on alarm
and randomly while you are away.

74-2760—1 6
Honeywell 7000 User Keypad Overview
The purpose of this section is to give you a tour of your keypad and the buttons
located on your keypad. To find out how to operate your system, see the Standard
Operation or Custom Operation section for more information. In that section you will
find out how to:
•Arm and disarm your system.
•How to make temporary changes to your system.
Security Modes
Let you design the type
and level of protection. For
example, less protection
for a quick trip to the store
and maximum protection
during vacations.
Alarm Sounder
Sounds an alarm to
ward off intruders or
warn you of other
emergencies.
Smart Help
Built-in "Help"
system lets
you learn as
you're using
the system.
Easy To Read
Two-line visual display
tells you in words what's
happening with your system
making it easy to use and
operate.
Automatic
Backlighting
Panel lights up
immediately with
a touch or in an
alarm condition.
"Options"
Button
Lets you adapt
the system to
your changing
security
requirements.
Special
Protection
Allows you to inde-
pendently secure
special areas of your
home such as a
home office or a pool.
Help Buttons
Summon help instantly
with specific buttons
for fire, police and
other emergencies
such as medical
assistance. M12003A
7000 User Keypad

774-2760—1
Honeywell 7000 Configuration
Your system can include more than one user keypad. If so, each user keypad oper-
ates in conjunction with the others and your system can be controlled from any one of
them. Messages and any user-requested operations appear the same on all user
keypads at the same time. The sounds, except for those indicating an alarm, can be
silenced on selective displays to avoid waking up other household members when
returning home late. The following is a summary of functions of the keypad:
Smart Help During any user keypad interaction, if you pause more than seven
seconds without hitting a key, the system assumes that help is
appropriate at that time. The user keypad provides help for the
specific function you are performing. After help is provided, the
display returns to the current function. Seven seconds later, the
cycle is repeated and the specific help message is presented two
more times. The messages are always pertinent to the area of the
system you are currently using.
Two-Line Display Messages and menu choices display to tell you what is
happening with your system, including: system status and
location of alarms, open points, and system troubles. Additional
lines can be displayed by scrolling information two lines at a time.
LEDs Two red LEDs (lights) are located next to the arrow keys. The
LED next to the UP arrow, when lit, indicates that some special
protection is turned off or security points were bypassed. The
LED next to the DOWN arrow, when lit, indicates a point of
protection such as a window or door is open.
Audible
Feedback Each time you press any key, an audible tone sounds to confirm successful entry of a digit or function.
Numeric Keys Press these keys to enter passcodes and make menu selections.
Press and hold FIRE for two seconds anytime, regardless of
mode or security system status, to transmit a fire alarm to the
Customer Service Center and sound an audible alarm. The
Customer Service Center dispatches the fire department and
notifies the first available person on your Call List.
Press and hold POLICE for two seconds anytime, regardless of
mode or security system status, to transmit an alarm to the
Customer Service Center. The Customer Service Center
dispatches the police and notifies the first available person on
your Call List. POLICE can be programmed to be silent or sound
an audible alarm; however, the user keypad continues to display
POLICE ALARM.
The SPECIAL function of your system was determined at the time
of installation. When monitoring of this key is included, press and
hold SPECIAL for two seconds to transmit an alarm to the
Customer Service Center. The Customer Service Center
dispatches the pre-determined help and notifies the first available
person on your Call List. The SPECIAL key can be programmed
to be audible or silent; however, the user keypad continues to
display SPECIAL ALARM.

74-2760—1 8
System Limitations
Not even the most advanced alarm system can guarantee protection against burglary,
fire, or environmental problems. All alarm systems are subject to possible compromise
or failure-to-warn for a variety of reasons including, but not limited to, the following:
•If sirens or horns are placed outside the hearing range of people in remote areas
of the building or in areas which are frequently closed off, their presence may not
provide the protection they are intended to provide.
•If intruders gain access through unprotected points of entry, the system will not
detect their entrance.
•If intruders have the technical means of bypassing, jamming, or disconnecting all
or part of the system, they will not be detected.
•If the ac power supply is off and the back-up battery is either missing or dead,
sensors will not detect intrusion.
•Smoke sensors cannot detect smoke in chimneys, walls, or roofs, or smoke
blocked by a closed door. They may not detect smoke or fire on a level of the
building different from the one in which they are located. Smoke detectors may not
be able to adequately warn of fires started by explosions, improper storage of
flammables, overloaded electrical circuits, or other types of hazardous conditions.
•If telephone lines are out of service, signals from the security system to the
security company cannot be sent. Telephone lines are vulnerable to compromise
by several means.
Press these keys to scroll through menus having more than two
selections and also to view points not ready or bypassed.
Whenever the LED is lit next to the down arrow, pressing that
arrow will show all points not ready. Whenever the LED next to
the up arrow is lit, pressing that arrow will show all points that are
bypassed and special protection points that are disarmed.
Modes control the amount of protection that is on. Press MODES
to display a menu of the modes pre-programmed for your system.
Use the arrow keys to scroll up or down to see additional
selections. Use the number keys to make your selection.
Press OPTIONS to display the Options menu to make system
changes such as bypassing points of protection or changing a
passcode. Use arrow and number keys to locate and make
selections.
Press OK to confirm selections.
Press CANCEL to cancel a menu selection or operation. If you
are at a menu selection, CANCEL allows you to return to the
previous screen. Cancel does not turn off alarms. Alarms are
turned off by entering your passcode.

974-2760—1
•Auser may not be able to reach a panic or emergency button quickly enough.
•Passive infrared motion detectors can only detect intrusion within the designed
ranges as diagrammed in the motion detector’s installation manual. They cannot
detect motion or intrusion that takes place behind walls, ceilings, floors, closed
doors, glass partitions, glass doors, or windows. Mechanical tampering, masking,
painting, or spraying of any material on the mirrors, windows, or any part of the
optical system can reduce their detection ability. Passive infrared detectors sense
changes in temperature; however, as the ambient temperature of the protected
area approaches the temperature range of 90°to 105°F, the detection performance
can decrease.
•Even if the system responds to the emergency as intended, however, occupants
may have insufficient time to protect themselves from the emergency situation. In
the case of a monitored alarm system, authorities may not respond appropriately.
This equipment, like other electrical devices, is subject to component failure. Inadequate
maintenance and failure to test are the most common causes of alarm failure. It is
strongly recommended that you test your system once a week to be sure that
all system components are working properly. See the System Testing section on
page 60 for information on how to test your system.
Although having an alarm system may make you eligible for reduced insurance
premiums, the system is not a substitute for insurance. Warning devices cannot
compensate you for loss of life or property.
Wireless Device Limitations
If your system includes wireless devices, beware of the following limitations:
•Wireless devices will not work without power. Battery-operated devices will not
work without batteries, with dead batteries, or if the batteries are not put in
properly.
•Wireless transmitters are designed to depend on batteries that have a limited life.
Longevity of batteries may be as much as 4 to 7 years, depending on the environ-
ment and usage. The wireless system will alert you to low battery situations, thus
allowing you time to arrange a change of the battery to maintain protection for that
given point within the system.
•Signals sent by wireless transmitters may be blocked by metal before they reach
the alarm receiver. Even if the signal path has been recently checked during a
weekly test, blockage can occur if a metal object is moved into the path.
•In some situations, a wireless panic button may have a signaling range of several
hundred feet from the protected home. Emergency personnel will respond to the
address of the protected home. A user who activates a wireless panic button may
be too far away from the protected home to be located by responding emergency
personnel.

74-2760—1 10

11 74-2760—1
What You Want To Do What Action You Take
Cancel a false alarm 1. Enter your passcode.
2. Call Customer Service Center, give them your passcard
number or code word, and tell them what happened.
Completely disarm security except
for 24-hour protected points. Enter your passcode. Do not push MODES first. Security is disarmed.
Select a mode. 1. Press
2. Press the arrow keys to scroll through choices.
3. Enter number of choice and follow prompts.
Select a security option. 1. Press
2. Make selections by entering the appropriate number
and follow the prompts.
Call for fire assistance* Press for two seconds.
Call for police assistance* Press for two seconds.
To send a special alarm* Press for two seconds.
When a burglar alarm occurs, the exterior siren or bell delays for 15 seconds before sounding.
When a fire alarm occurs, the siren or bell sounds instantly. When a police or special alarm
occurs, the exterior siren or bell sounds instantly, unless programmed to be silent.
MY SYSTEM
The Honeywell 7000 has several features that can be programmed to meet your
specific needs. During the installation process, you decided on how you wanted these
features to operate. This section details your selections. In addition, a Quick Reference
Chart is provided explaining the operation of the main functions of your system.
Quick Reference Chart
*If you do not have a monitored system, these features only sound an alarm at your house if
they have been programmed to be audible.
IMPORTANT
If you have a monitored system and the burglar alarm portion of your system is
triggered, the Honeywell Customer Service Center receives a signal and will
take action based on instructions you pre-determined at the time of installation.
Typically, we will call you first to see if you unintentionally tripped the alarm. Next,
we will dispatch the police if we are unable to determine that the alarm was
unintentional. Then we notify the first available person on your Call List. We do
not call you first if the alarm is for Fire or if you have pressed the POLICE button.
If you do not have a monitored system, an alarm sounds in your home and a
siren or bell sounds outside (when installed), but no signal is sent to the
Customer Service Center.

74-2760—1 12
Options I Have Selected
My Honeywell Customer Service Center Phone Number is: ___________________
My Honeywell Sales Representative’s Phone Number is: ___________________
___ Yes, my system is being monitored by Honeywell.
___ Yes, I have selected the Duress Digit option. My Duress Digit is __________
___ Yes, I have a wireless key (see the Wireless Key section for operating instructions).
My police alarm is ________ silent _________ audible
My special button calls _________ for assistance
Entry/Exit Delay Time #1 (in seconds): __________
Location of designated Delay Door(s):
___________________________________________________________________
Entry/Exit Delay Time #2 (in seconds): __________
Location of designated Delay Door(s):
___________________________________________________________________
Location of Protected Door(s):
___________________________________________________________________
___________________________________________________________________
Location of Protected Window(s):
___________________________________________________________________
___________________________________________________________________
Location of Interior Protection:
___________________________________________________________________
Location of Fire Protection:
Smoke Detectors: _________________________________________________
I have ____ 2 wire ____ 4 wire smoke detectors. (See page 47 for detector reset
instructions.)
Heat Detectors: ___________________________________________________
Location of Special Protection Points:
___________________________________________________________________
Location of ON WATCH Points:
___________________________________________________________________
I have selected:
___ Standard Operation
___ Custom Operation

13 74-2760—1
Custom and Special Protection Modes
I Have Selected
Below is a chart to list custom modes and special protection modes.
Mode Configuration Chart.
Mode Number
and Name Mode Type Security/Special Security Arrangement
Disarmed
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11
12.
13.
14.
15.
16.

74-2760—1 14
Passcodes I Have Selected
Below is a chart to list your users.
User Chart.
NOTE: 1. Only passcode 5 can be used for telephone access.
2. If you have Latch Key reporting only use the combinations of Family
authority levels and passcodes 6-10 to get disarming reports sent to your
pager number.
My Emergency Call List
(Remember to keep this list current as information changes.)
Name Telephone Number
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Where to find the RJ31X ________________________________________________
Name Passcode Level (Master, Guest, Family) Latch Key Telephone Access
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

15 74-2760—1
STANDARD OPERATION
Overview
The Honeywell 7000 can have either standard or custom operation. The purpose of
this section is to explain how to use your system when you have chosen to use
standard pre-programmed modes. This section covers how to arm and disarm your
system and put your system in ON WATCH and SYSTEM TEST modes.
Your system allows you to manage numerous security devices with one control. To
simplify the choices and make your system quick and easy to operate, a group of
pre-programmed commands have been organized into modes.Your system comes
with six pre-programmed Security Modes which are listed below.
For three of the security modes, you will predetermine, at the time of installation,
which interior protection points will be on and which will be off. For example, in the
Home mode described in the following table, you may want interior protection in the
basement on and in the upstairs living area off.
You also have the option to customize your modes. See the Custom Modes section for
more information.

74-2760—1 16
• All perimeter and interior security protection points
are on.
• Exit and entry delay.
• Perimeter protection is on.
• Only predetermined interior protection is on.
Example: This may be used when running an
errand and pets are roaming free in
the house.
• Exit and entry delay.
• Perimeter protection is on.
• Only predetermined interior protection is on.
• No exit delay.
• There is an entry delay if someone opens an
entry door.
Example: Use this mode when you are home,
you want your exterior protection on,
and you may have people entering
your home.
• Perimeter protection is on.
• Only predetermined interior protection is on.
• No exit delay.
• No entry delay. system instantly alarms when a
security point is tripped.
Example: Use this mode when nobody will be
entering or leaving your home and
everyone is asleep. If someone were to
walk through a door, the system will
instantly alarm.
• All points you have designated as ON WATCH
sound a short audible when tripped, and display the
tripped point on the keypad for 20 seconds.
• All perimeter and interior protection is ON WATCH,
sounds a short audible when tripped, and displays
the tripped point on the keypad for 20 seconds.
• Allows customer to test each point of protection.
Standard Security Modes
The following Security Modes are pre-programmed:
1– AWAY ALL ON
M6936
2– AWAY PARTIAL
M6937
3– HOME
M6938
4– HOME SLEEP
M6939
5– ON WATCH
M6940
6– SYSTEM TEST
M6941

17 74-2760—1
What You Do What You See What Happens
View user keypad The disarmed mode is
displayed.
Press The mode menu displays the
first two selections:
1-AWAY ALL ON turns on both
your perimeter and interior
protection.
2-AWAY PARTIAL turns on any
protection you have
predetermined.
Press
or
to leave
or
The new mode displays. The
EXIT NOW prompt also
displays. A warning tone sounds
during the exit delay period.
Arming Your System When Leaving Home
When arming your system, first check the LED next to the DOWN arrow. If the LED is lit,
press the DOWN arrow to view open protection. Close protection before arming. See
the Force Arming Your System section to Arm your system around an open protection
point.
NOTE: The EXIT NOW prompt and warning tone mean that the exit delay time
programmed for your system is now in effect and you should leave through a
designated door before the time expires to avoid causing an accidental
alarm. The warning tone rate increases the last ten seconds of the delay
period, indicating that an alarm is about to be reported. The EXIT NOW
prompt disappears when the delay time expires.
THE SMITH'S
M6942
1– AWAY ALL ON
2– AWAY PARTIAL
M6943
AWAY ALL ON
EXIT NOW
M6944A
AWAY PARTIAL
EXIT NOW
M6945

74-2760—1 18
Disarming Your System
While you are at home, you can turn the protection off by simply entering your
passcode. This will disarm your system and silence any audible alarms.Your system
will show a display of your choice. This will typically be your family’s name.
The security portion of your system is completely disarmed (except for 24-hour
protection such as fire and any special protection). Now you can select a new mode in
the usual manner without waiting for the entry delay time to expire.
Disarming Your System When Returning Home
On entering your premises whenever the system is armed, the keypad will sound an
entry warning tone. The pace of the warning tone will speed up ten seconds before
the police will be called. Proceed immediately to a keypad and enter your passcode.
This will disarm your system and silence the audible warning. The system will show a
display of your choice. This will typically be your family name.
What You Do What You See and Hear What Happens
Enter through your
designated Entry/Exit
door
DISARM NOW
OR POLICE
WILL BE CALLED
A warning tone pulses ten
times a second and the
display scrolls the message
prompting you to disarm
the system.
Enter your passcode SMITH’S The warning tone stops
and the system is
disarmed.

19 74-2760—1
What You Do What You See What Happens
View user keypad The disarmed mode is
displayed.
Press The mode menu displays with
the first two selections.
Press The display scrolls to reveal
more mode selections. You
may enter a mode number at
any time.
3-HOME arms your perimeter
protection (and any interior
protection you have pre-
determined). Anyone entering
your home through a
designated door will activate a
timed entry delay, allowing
them to disarm your system.
4-HOME SLEEP arms your
perimeter protection (and any
interior protection you have
pre-determined). Anyone
entering your home will
instantly activate an alarm.
Press
or or
The new mode displays and
there is no exit warning tone.
Arming Your System When Staying Home
THE SMITH'S
M6942
1– AWAY ALL ON
2– AWAY PARTIAL
M6943
3– HOME
4– HOME SLEEP
M6946
HOME
M6947
HOME SLEEP
No Delay
M6948A
IMPORTANT
With NO DELAY, if you pass through a protected interior area or open a
protected point that is armed you will trigger an instant alarm.

74-2760—1 20
Changing From One Arming Mode to Another
You can easily change from one arming mode to another arming mode without having
to disarm the system. See the following example:
What You Do What You See What Happens
View user keypad The current mode is displayed.
Press The Mode menu displays.
Press The selected mode displays.
HOME
M6947
1– AWAY ALL ON
2– AWAY PARTIAL
M6943
AWAY ALL ON
EXIT NOW
M6944A
Selecting a new mode with a higher security level (one that arms all or part of your
security system) or selecting one that leaves the status unchanged does not require a
passcode.
Selecting a new mode with a lower security level (one that disarms all or part of your
security system) will display a prompt for you to enter your passcode.