Honeywell First Alert 145C User manual

First Alert 145C Quick Guide
https://alpha.adt.com/help/146[11/12/2018 10:34:23 PM]
First Alert 145C - Quick Guide
For a detailed review of the entire system, please view the First Alert 145C manual.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +
[2].
To arm in STAY mode when you are not leaving the premises, enter your [security code] + [3].
Disarm:
To disarm, enter your [security code] + [1].
Select

First Alert 145C Quick Guide
https://alpha.adt.com/help/146[11/12/2018 10:34:23 PM]
For more information on this topic please visit the complete First Alert 145C manual.
Battery
The First Alert 145C operates on a Battery Replacement Page.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally
unarmed or to access a protected area when the system is armed.
To bypass a zone, enter your [security code] + [6] + [2-digit zone number].
To unbypass a zone, enter your [security code] + [1].
For more information on this topic please visit the complete First Alert 145C manual.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a
protected door/window is opened.
To turn the door chime function on and off, press [FUNCTION] + [9].
Toggle between On, to turn the chime function on and Off, to turn the chime function off.
For more information on this topic please visit the complete First Alert 1220 manual.
Reset
To clear the display after an alarm event, enter your [security code] + [1] to clear the alarm
event history.
Security Codes
Your system allows for additional users, however a user may only be added or deleted by a
Master user.
To add a user, enter your [Master or Manager code] + [8] + [3-digit new user number] +
[new user’s 4-digit code].
To delete a user, enter your [Master code] + [8] + [user number to be deleted]. Wait
approximately three seconds for the keypad to verify.
For more information on authority levels and partitions, please view the First Alert 1220

First Alert 145C Quick Guide
https://alpha.adt.com/help/146[11/12/2018 10:34:23 PM]
Return to Top
manual.
Trouble Conditions
Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad.
Any key will silence the beeping. A display of CHECK + zone no. may indicate that a problem
requires your attention. Check the specified zone area, close any open doors or windows and
enter your security code and press [OFF]. If your system includes wireless sensors, the CHECK
condition may be caused by some change in the environment of the protected area.
To silence trouble beeps, press any key or enter your security code and press [OFF].
Volume
The volume on the First Alert 145C is not adjustable.
How can we help?
Search