HOOKE ROAD BXG.1005 User manual

Tubular Doors
(1) Contents:
(2) Tools required:
a. 5mm Hex Socket Wrench;
b. 14mm Wrench;
BXG.1005

(3) Installation time:
About 1 hour, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.1005), please scan the QR code.

(4) Installation instruction:
Step 1:
Begin the installation by removing the original doors.
Step 2:
Assemble the Part A1 and Part B1.
Note:don't tighten up the bolts too much for a adjustable operation in
the next step.

Step 3:
Install the tubular door into the the car by aligning and putting into
hinges.
Step 4:
Assemble the Part C1 to the tubular door.

Step 5:
The same install operation for the passenger side.
Step 6:
Installation completed.

Attention:
1.The product parts in this instruction may differ slightly from
the actual product contents but generally does not affect the
installation of the product.
2.Please feel free to contact your distributor if you have any
kind of question about your purchase.
Hooke Road to find your parts