HOOKE ROAD BXG.3018 User manual

Front Bumper
(JK & JL)
(1) Contents:
(2) Tools required:
BXG.3018
19mm Socket Wrench;

(3) Installation time:
About 1 hour, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.3018), please scan the QR code.

(4) Installation instruction:
Step 1:
Remove the original front bumper.

Step 2:
Install the PART”Y” on the vehicle.(JL & JK)

Step 3:
Tighten the bumper(PART”Y”).(JL & JK are the same installation method)
(1)Install the PART”B”,PART”C”,PART”D” on the red circle bolt holes.

(2)Install the PART”A”,PART”C”,PART”D” on the yellow circle bolt holes.
Step 4:
Repeat above steps for another side.

Step 5:
Install the PART”Z” on the PART”Y”.(JL & JK)
Step 6:
Installation completed.
JL
JK

Attention:
1.The product parts in this instruction may differ slightly from
the actual product contents but generally does not affect the
installation of the product.
2.Please feel free to contact your distributor if you have any
kind of question about your purchase.
Hooke Road to find your parts