HOOKE ROAD BXG.2041 User manual

Roof Rack
(1) Contents:
(2) Tools required:
BXG.2041
A.10mm & 12mm Wrench;
B.4mm & 5mm Socket Wrench;

(3) Installation time:
About 1.5 hours, 2-3 people may be needed. Installation time may
differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2041), please scan the QR code.

(4) Installation instruction:
Step 1:
Install the PART”S” & PART”V” with PART”H”, PART”I”, PART”J”, PART”K”.
(V1=V2=V3=V4=V5). As shown below.

Step 2:
Install the PART”S” & PART”T” & PART”U” with PART”H”, PART”I”,
PART”J”,PART”K”. And the bottom one will need PART”L”, PART”N”,
PART”O”,PART”P”. As shown below.
(1) Install the PART”S”
& PART”T”.

(2) Install the PART”S” & PART”U”.

Step 3:
Repeat above steps for another side.

Step 4:
Install the roof rack. First ,put it on the top of vehicle.

Step 5:
Install the PART”C” on the vehicle with the original bolts.
Step 6:
Install the roof rack & PART”C” with PART”L”,PART”N”,PART”O” &
PART”P”. (C1=C2)

Step 7:
Install the roof rack & PART”A” & PART”B” with PART”H”, PART”I”,
PART”J”,PART”K” & PART”M” & PART”L”. As shown below.

Step 8:
Repeat above steps for another side.

Step 9:
Installation completed.
(The 4 cube lights not
included.)

Attention:
1.The product parts in this instruction may differ slightly from
the actual product contents but generally does not affect the
installation of the product.
2.Please feel free to contact your distributor if you have any
kind of question about your purchase.
Hooke Road to find your parts