HOOKE ROAD BXG.1008 User manual

Spare Tire Jerry
Can Mount
(1) Contents:
(2) Tools required:
7mm wrench;
BXG.1008

(3) Installation time:
About 40 minutes, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.1008), please scan the QR code.

(4) Installation instruction:
Step 1:
Notes the position for installation
in the tire carrier.
Step 2:
Take down the nuts in the Part A. Then insert Part B into the Part A
along the rod.
Step 3:
Place the Jerry Can Mount and Part A around the left side of the tire
carrier as the following picture shown. Then do some adjustment until it’s in
an ideal position and tighten up the nuts.

Step 4:
The same operation for the passenger
side installation.

Step 5:
Congratulations on the purchase and installation of a quality Hooke
Road product!
Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation of
the product.
2.Please feel free to contact your distributor if you have any kind of
question about your purchase.
Hooke Road to find your parts