HOOKE ROAD BXG.2050 User manual

Rear Inner Fender Liners
(1) Contents:
(2) Tools required:
BXG.2050
BXG.2064
A.10mm Wrench;
B.4mm & 5mm HEX
Socket Wrench;

(3Installation time:)
About 40 minutes, 1-2 people may be needed. Installation time may
differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2050 & BXG.2064), please scan
the QR code.

(4) Installation instruction:
Step 1:
Remove the original rear inner fender liners of the vehicle.
Step 2:
Install the PART”B” on the driver side of the vehicle first.
There are just 4 bolt holes. As shown below.
Step 3:
Install the bottom 2 bolt holes first with PART”H”,PART”I”,PART”J” &
PART”K” by 4mm HEX socket wrench.

Step 4:
Install the bottom 2 bolt holes first with PART”L”,PART”J” & PART”M” by
5mm HEX socket wrench.

Step 5:
Repeat above steps for the passenger side.
Step 6:
Installation completed.

Attention:
1.The product parts in this instruction may differ slightly from
the actual product contents but generally does not affect the
installation of the product.
2.Please feel free to contact your distributor if you have any
kind of question about your purchase.
Hooke Road to find your parts