HOOKE ROAD BXG.8203 User manual

Rear Bumper
(1) Contents:
(2) Tools required:
Qty
Part
Size(mm)
Qty
Part
Size(mm)
1
Rear Bumper Assembly
12
Split Lock Washer
12
12
Hex Bolts
M12*30
6
Hex Nuts
M12
18
Flat Washer
M12*30*2
6
Flange Hex Lock Nuts
M12
8
Button Head Socket Cap Bolts Screws
M6
BXG.8203
a. 18mm Wrench;
b. Drive Socket Ratchet Wrench;
c. 18 & 19mm Shallow Socket;
d. 4mm Hex Bit Socket;

(3) Installation time:
About 1 hour, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8203), please scan the QR code.

(4) Installation instruction:
Step 1:
Assemble the Part “H” &“I”.
Step 2:
Install the Part“K”into the car with original bolts.

Step 3:
Install the bumper into the car frame.

Step 4:
Tighten those bolts after adjusting the bumper totally.
Step 5:
Install the lamp and the D-rings.

Step 6:
The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!
Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind
of question about your purchase.
Hooke Road to find your parts