HOOKE ROAD BXG.5004 User manual

Roof Rack
(1)Contents:
(2)Tools required:
A.13mm & 12mm Wrench;
B.4mm & 5mm Socket Wrench;
C.Pneumatic Riveting Nut Gun
with 6mm Nut Chuck;
D. 4mm Ratchet Allen Key Wrench;
BXG.5004

(3) Installation time:
About 2 hours, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.5004), please scan the QR code.

(4) Installation instruction:
Step 1:
Install the PART “D”, “E”, “F”, “G”, “H”, “A”, “I” and “B2”. The assembly using
the bolts PART “J”, “M” and “O”. As shown below.
Note: Pay attention to the order of the five cross bars.

Step 2:
Install the PART “B2”, “A”, “I” with PART “J”, “L”, “M”, “O”. As shown below.

Step 3:
Repeat above steps for another side.

Step 4:
Install the roof rack. First , place it on the proper positon on the top of
vehicle.
Step 5:
Note the position of the installation brackets with a marking pen.
According to the marks, drill eight installation holes totally. Then use the
pneumatic riveting nut gun with 6mm nut chuck to install the eight riveting
nuts.

Step 5:
Place the rack on the top of the car. Install it with PART “K”, “P” and “N”.

Step 6:
The installation is complete. We hope you enjoy a wonderful off road life
with this quality product!

Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind
of question about your purchase.
Hooke Road to find your parts