HOOKE ROAD BXG.5006 User manual

Roll Bar
(1)Contents:
(2)Tools required:
a.17 mm Socket Wrench;
b.15 mm Socket Wrench;
c.13 mm Socket Wrench;
d.5 mm Allen Wrench;
BXG.5006

(3) Installation time:
About 2 hours, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.5006), please scan the QR code.

(4)Installation instruction:
Step 1:
Prepare the Installation by clear your pickup truck bucket.
Step 2:
Place the part H1 ,H2 and E.

Step 3:
Place the bolts in the truck slide way to install the part H1 and H2.

Step 4:
Assemble the part H1, H2 and E.

Adjust the positions of part H1, H2 and E. Then tighten up all the bolts.
Step 5:
Assemble the part F1, G1, F2 and G2 into the structural frame.

Step 6:
Install the part A1, A2 and B.

Step 7:
Assemble the Part C1, C2, C3 and C4.

Step 8:
Assemble the part D.

Step 9:
The installation is complete. We hope you enjoy a wonderful off road life
with this quality product!
Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind
of question about your purchase.
Hooke Road to find your parts