Hornady SnapSafe 75401 User manual

SnapSafe Under Bed Safe
Read this manual carefully and never store it inside the safe!
®
LARGE
40"x22"x6"
Item No. 75401
XXL
48"x24"x7"
Item No. 75400

PACKAGE CONTENTS
One – Steel Security Safe
One – Operation Manual
Two – Override Access Keys
Additional items needed:
Four– “AA” Batteries
PRODUCT OVERVIEW
A- Safe Entry Knob
B- Override Key Cover
C- Electronic Digital
Keypad
D- Safe Cabinet Body
E- Safe Door
Assembly
Item No. 75401
Exterior: 40"W x 6"H x 22"D
Interior: 37"W x 4.5"H x 20"D
Weight: 105 lbs
Power: 4 AA batteries
SnapSafe Under Bed Safe
®
SnapSafe Under Bed Safe LARGE
®
Item No. 75400
Exterior: 48"W x 7"H x 24"D
Interior: 44"W x 5"H x 21"D
Weight: 140 lbs
Power: 4 AA batteries
SnapSafe Under Bed Safe XXL
®

STEP 1. Open Safe With Override Key
1. Insert and rotate override key to unlock.
2. Turn knob to left and open the safe door.
3. Do not store keys in safe.
STEP 2. Install Batteries
1.
Remove the battery cover inside the door
by removing screw.
2.Insert 4 AA batteries and replace the battery
cover.
3.Do not close the door before testing digital
lock.
STEP 3. Program First Passcode
1.
Open safe door with override key.
2.Press the red reset button(C) inside the door. The safe will beep twice and the
yellow light on the keypad will turn on.
3.Enter new passcode (3 to 8 digits) within 10 seconds followed by "A".
The safe will beep twice and the yellow light will turn off. With the door open,
verify the correct code is programmed by entering code followed by "A". The
motor should activate when the correct code is entered. If not, repeat steps
above.
4.
1. Keep door open.
2. Press "0" on the keypad twice, then press
the red reset button (C) inside the door.
The safe will beep 3 times and the yellow
light turns on.
4. The safe will beep twice and the yellow
light will turn off. With the door open,
verify the correct code is programmed by
entering code followed by "B". The motor
should activate when the correct code is
entered. If not, repeat steps above.
STEP 4. Program Second Passcode
3.Enter new passcode (3 to 8 digits) within
10 seconds followed by "B".
SETUP

OPERATION
TO OPEN THE SAFE
1. Enter either first or second passcode followed by "A" or "B".
2. The safe will beep twice and the green light turns on.
TO CLOSE THE SAFE
1. Close the door and hold it in the closed position.
2. Rotate the knob to right to engage the lock bolts to lock
the safe.
SECURE LOCKOUT PERIODS
LOW BATTERY WARNING
If the battery power becomes low, both the green and red lights on the keypad
will illuminate after a code is entered. Replace batteries immediately with quality
batteries to ensure proper operation.
3.Rotate the knob to the left and open the door.
1. If three wrong passcodes are entered, the safe will beep and the keypad will
deactivate for 20 seconds. The safe can only be opened with the manual key
during this time.
2.If three wrong passcodes are entered again, the safe will beep and the key-
pad will deactivate for 5 minutes. The safe can only be opened with the ma-
nual key during this time.