human care seBastian II User manual

Service manual / Servicemanual / Servicehandbuch /
Servicehandleiding
seBasan II 90554

2www.humancaregroup.com
Content Innehåll
InhoudInhalt
ENGLISH
DEUTSCH
SVENSKA
NEDERLANDS
Service Manual 3
Compliances and Standards 4
Useful informaon 4
Service manual descripon 5
Tools & Maintenance 5
Troubel shoong & Solving 7
Spare parts list 13
Servicemanual 14
Eerlevnad och standarder 15
Användbar informaon 15
Beskrivning av servicemanual 16
Verktyg och underhåll 16
Felsökning och felavhjälpning 18
Reservdelslista 24
Servicehandbuch 25
Konformität und Standards 26
Nützliche Informaonen 26
Beschreibung des Servicehandbuchs 27
Werkzeuge & Wartung 27
Fehlersuche und -behebung 29
Ersatzteilliste 35
Servicehandleiding 36
Nalevingen en normen 37
Nuge informae 37
Beschrijving van de servicehandleiding 38
Gereedschappen & Onderhoud 38
Probleemoplossing 40
Reserveonderdelenlijst 46

www.humancaregroup.com 3
ENGLISH
Symbols
WARNING symbol indicates a poten-
ally hazardous situaon which, if not
avoided, could result in serious injury
to the user or damage to property
and/or the device itself.
INFORMATION symbol indicates
recommendaons and informaon for
proper, trouble-free usage.
WEIGHT CAPACITY symbol indicates
maximum user weight for the product.
Do not exceed this weight in any
circumstance.
CE MARKING symbol indicates product
meets requirements of EU Direcve
93/42/EEC (MDD) and/or EU
Regulaon 2017/745 (MDR).
RECYCLE according to local regulaons.
MEDICAL DEVICE symbol indicates
that the product is a medical device
according to the denion of
medical device in EU Direcve 93/42/
EEC (MDD) and/or EU Regulaon
2017/745 (MDR).
READ INSTRUCTIONS and ensure you
fully understand them before using
this product.
Important!
You must read the user manual for your device prior to usage. Keep this
booklet and informaon handy for future use.
Product modicaon is not permied.
Before use, always check that the product
is not damaged or worn.
Human Care’s products are connuously
being developed and updated to provide our
customers with the highest quality. We reserve
the right to make design changes without prior
noce.
Always make sure that you have the most
recent version of the manual which is available
for downloading from our website at
www.humancaregroup.com.
Contact your local distributor if you have any
quesons about the product and its use.
Service Manual

4www.humancaregroup.com
seBasan II Service Manual
Human Care is an ISO 13485:2016 cered
Swedish medical device company. The Quality
Management System is in compliance with US
21 CFR part 820.
The product is CE marked in accordance with EU
Direcve 93/42/EEC (MDD) and/or EU Regula-
on 2017/745 (MDR), as class I medical device.
The CE mark is on the product.
This sling has been tested in accordance with
ISO 10535.
Compliances and Standards
Useful informaon
a) Service manual
The service manual is created for technicians
involved in servicing of seBasan II stand-up
li. Safe performance of li service procedures
requires experience, technical skills and general
knowledge of safety rules.
This manual uses warnings and cauons to pay
special aenon to service procedures.
Warning – this informaon tells us
about the possibility of safety risk of
technician and user.
Cauon – this informaon tells us about
acons that can cause potenal damage
of the li.
b) seBasan II installaon and operang
For installaon and operaon of the li, see the
user manual.
c) Service of seBasan II stand-up li
The service can be only made by Human Care’s
authorized service team or authorized units by
Human Care.
Human Care shall bear no responsibility for the
consequences of repairs or modicaons that
have been done by unauthorized personnel and
for the use of non-original replacement parts
dedicated by Human Care for lis.
d) Service documentaon
Service documentaon and service repair
document are available on a website accessible
for authorized service.
e) Safety precauons
The stand-up li design provides maximum
of safety. Safety of the device are ensured by
safety standards IEC60601-1.
Read these cauons carefully before start
servicing!
Note - do not perform service repairs and
funconal tesng when the client is on
the device.
f) Addional informaon
In case of any problems with stand-up li con-
tact the intermediary or manufacturer’s service.
Service contact details:
HUMAN CARE SWEDEN (HQ)
Årstaängsvägen 21B
117 43 Stockholm
Phone: [phone]
Fax: [phone]
Email: [e-mail]

www.humancaregroup.com 5
ENGLISH
Service manual descripon
Tools & Maintenance
Service manual contains informaon about
repairing, maintaining and idencaon of the
stand-up li. The li can be idened by using
the idencaon code which is placed on the
name plate.
Note – if the plug from baery charger
does not match a socket in your country,
you can use an adapter.
Tools
Standard set of tools is required for servicing of
the stand-up li:
Allen key set Ordinary set of various keys
Flat screwdriver
Hammer Volt meter

6www.humancaregroup.com
seBasan II Service Manual
Device maintaining
All movable joints must be lubricated every six
months or when experiencing squeaks or other
noise. These nodes are:
• axle transport wheels,
• axle actuator mounng,
• jib arm bearing sleeve.
We recommend using any available penetrang
lubricants.
Report all loose connecons that are supposed
to be xed to the manufacturer’s authorized
service agent and stop using the product unl
the problem is resolved.
This device is equipped with electric actuator
which allows to adjust the height of the jib
arm. In order to ensure proper performance of
the actuators check the actuators for unusual
sounds every 3 months. These unusual sounds
contain rales, squeaks, creaks. Any perceived
performance deciency must be reported to
Human Care technical service immediately cea-
sing device operaon unl remove their causes.
Not less frequently than every 1 years and aer
each failure/repair of actuator technical service
must check the li for electric safety.
The minimal range of the review should include:
• check if there were no mechanical wiring
damages of the device,
• check if there were no mechanical damages
of the controller and the actuators.
See checklist in user manual.
Basic periodic review
One year aer producon date or every 8000
cycles of using the li, the indicator lamp light
up.
If this LED is on, operator must check condion
of the li (cables connecons, looseness on the
frame etc.).
Press and hold “up” and “down” buon for 5
sec., to turn o the light aer review.
Transport wheels
Actuator mounng
Jib arm bearing sleeve
LED indicator

www.humancaregroup.com 7
ENGLISH
Troubleshoong
Symptom Possible cause - soluon
Device doesn’t work properly. Diagnose the mobile li.
Height adjustment doesn’t work. Replace main actuator.
The base legs doesn’t spread. Replace secondary actuator.
Problem with moving device. Check/replace castors.
Troubel shoong & Solving
Diagnose the stand-up li
In case of problems with height adjustment
please complete following steps:
Step 1:
• Check the baery level on the hand control.
If any led is lighng, please check the baery
with the volt meter,
• If the baery is empty, please charge it,
• If aer a few hours the baery is sll empty,
please check if the charger is working cor-
rectly by using the voltmeter. If the charger
is ok, you have to replace the baery for a
new one.
Step 2:
If baery level is correct, check the wires are
connected properly to the control box in the
boom part of the device.
Checking Voltage on baery
Checking voltage on charger
Checking wires connecon

8www.humancaregroup.com
seBasan II Service Manual
Step 3:
If everything looks good so far but the device
sll doesn’t work, for further diagnose, spare
parts will be necessary (hand control, control
box and actuator).
• At rst, replace the hand control for new
one (or switch with another device if it’s
possible) and check,
• Next, prepare a new control box and connect
it with slots from device,
• Now test what is wrong, control box, hand
control or actuator.
Note – in case of situaon that one of actuators
is not working, make sure that problem
is with actuator, by swapping the wires
1 and 2 for actuators in the control box
and use the remote control to test (a
working actuator means a faulty control
box).
Step 4:
To remove control box, just loosen two main
screws and li up whole holder with control
box.
Loosening two screws Removing main holder

www.humancaregroup.com 9
ENGLISH
Replace main actuator
Step 1:
Use a at screwdriver to remove the star lock
cap and circlips from the upper rod holding the
actuator (from only one side of the pin) and
remove the pin. Do the same operaon for the
boom side of the actuator.
Step 2:
Do the same operaon for boom side of the
actuator.
Removing cover
Removing cover
Removing pin
Removing safety clip
Removing safety clip
Removing cover

10 www.humancaregroup.com
seBasan II Service Manual
Step 3:
Remove old and install the new actuator in the
reverse order to dismounng, carefully ghten
the gland.
Replace boom actuator
Cauon - Following procedures require turn
down device on aside. To protect it from any
damage or scratches we strongly recommend to
prepare some kind of protecon (card boards,
sponges, etc.) on the oor.
Step 1:
Remove boom and side metal covers.
Step 2:
With remote control try to spread legs and
check with actuator does not work.
Metal side cover
Internal view
Removing screws from main cover
Sponges under device